|◀ 5965 - 5976 of 6092 ▶|
View:
Boston USA1009101 Forged Brass 2-Piece 1/4 Turn Full Port Ball Valve, 1", FPT
    Manually operated metallic gas valves
  • Assembled from domestic and foreign parts
  • Zinc-plated steel nut and lock washer
  • Brass gland nut and end cap
    Boston Metal Products, LTD. was established in the summer of 1998 by it's three founding partners who combined, have over fifty years of experience in the manufacturing and sale of plumbing and related products. BMP currently occupies approximately 16,000 square feet office, manufacturing and warehouse space in a modern industrial park located in northeast Rhode Island, in the rural town of Smithfield. This ideal location, within minutes of three major highways, allows for shipment of product to your door in a most timely fashion. BMP's gOverall Length is to ship all orders within 24 to 48 hours of receiving them, so that our customers are able to minimize inventory requirements with the confidence that products are only a truck ride away.,
Item#:
USA1009101
Manufacturer Item:
USA1009101
Manufacturer:
BOSTON METAL PRODUCTS, LTD
Grundfos UPS 26-99 FC 3-Speed Circulator Pump, 0.16 HP, 115 VAC , 3380 RPM , 33 gpm
    Built-in motor protection for longer life and better performance
  • Whisper quiet operation for sound sensitive installations
  • Includes (2) Gaskets
  • Integral check valve
  • Stainless steel rotor can and bearing plate
Item#:
UPS26-99FC
Manufacturer Item:
52722512
Manufacturer:
GRUNDFOS PUMPS CORP
Spirotherm Spirovent Junior Microbubble VJP Series Solid Brass Air,

Cello WP17-16

Item#:
VJP100TM
Manufacturer Item:
VJP100TM
Manufacturer:
SPIROTHERM INC
Spirotherm Spirovent Junior Microbubble VJP Series Solid Brass Air,

Cello WP17-20

Item#:
VJP125TM
Manufacturer Item:
VJP125TM
Manufacturer:
SPIROTHERM INC
Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.
    Maintenance free
  • No venting required
  • Vent head is designed to stay dry, dirt and leak resistant
  • 1/2" male thread port for pressure testing or remote venting of unwanted gases
  • Quiet operation
  • Increased component life
  • Reduced oxygen based corrosion and pump cavitation
  • The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
  • The air chamber has been designed so that dirt cannot reach the valve
  • Large capacity collection chamber reduces the need for frequent draining
  • Drain valve for flushing out the dirt
  • Brass vent head
  • Non-ferrous float
  • Viton seal and O-Ring
  • Copper coverall Lengthescing medium

    Cello WP17-24

Item#:
VJS100TM
Manufacturer Item:
VJS100TM
Manufacturer:
SPIROTHERM INC
Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.
    Maintenance free
  • No venting required
  • Vent head is designed to stay dry, dirt and leak resistant
  • 1/2" male thread port for pressure testing or remote venting of unwanted gases
  • Quiet operation
  • Increased component life
  • Reduced oxygen based corrosion and pump cavitation
  • The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
  • The air chamber has been designed so that dirt cannot reach the valve
  • Large capacity collection chamber reduces the need for frequent draining
  • Drain valve for flushing out the dirt
  • Brass vent head
  • Non-ferrous float
  • Viton seal and O-Ring
  • Copper coverall Lengthescing medium

    VJR150TM

Item#:
VJR150TM
Manufacturer Item:
VJR150TM
Manufacturer:
SPIROTHERM INC
Zilmet ZEP-05 Expansion Tank 2.1G 3/4 MPT
Specifications
  • Carbon Steel Shell
  • Stainless Steel Connection
  • Butyl fixed membrane
  • Max operating pressure: 150 PSIG
  • Operating temperature: 210°F
  • Factory precharge: 40 PSIG
  • 5 year limited manufacturer warranty,
    Zilmet ZEP-05
  • Item#:
    ZEP-05
    Manufacturer Item:
    ZEP5
    Manufacturer:
    ZILMET USA CORP
    Zephyr Components ZPB140 Pressure Washer Port-A-Blast
    Item#:
    ZPB140
    Manufacturer Item:
    ZPB140
    Manufacturer:
    SEALED UNIT PARTS CO, INC
    Zilmet ZHT8-15 Expansion Tank 15 3/4 MPT
    Item#:
    ZHT8-15
    Manufacturer Item:
    ZHT8-15
    Manufacturer:
    ZILMET USA CORP
    Zilmet ZHT18-30 Expansion Tank 30 3/4 MPT
    Specifications
  • Carbon Steel Shell
  • Stainless Steel Connection
  • Butyl fixed membrane
  • Max operating pressure: 150 PSIG
  • Operating temperature: 210°F
  • Factory precharge: 40 PSIG
  • 5 year limited manufacturer warranty,
    Zilmet ZHT18-30
  • Item#:
    ZHT18-30
    Manufacturer Item:
    ZHT18-30
    Manufacturer:
    ZILMET USA CORP
    Zilmet ZHT24-60 Expansion Tank 60 3/4 MPT
    Specifications
  • Carbon Steel Shell
  • Stainless Steel Connection
  • Butyl fixed membrane
  • Max operating pressure: 150 PSIG
  • Operating temperature: 210°F
  • Factory precharge: 40 PSIG
  • 5 year limited manufacturer warranty,
    Zilmet ZHT24-60
  • Item#:
    ZHT24-60
    Manufacturer Item:
    ZHT24-60
    Manufacturer:
    ZILMET USA CORP
    Taco 007S Circulator Pump, 1/25 HP, 115 VAC , 23 gpm
      Standard high capacity output and compact design
    • Quiet, efficient operation
    • Direct drive, low power consumption
    • Unique replaceable cartridge design-field serviceable
    • Self lubricating, no mechanical seal
    • Unmatched reliability, maintenance free
    • Universal flange to flange dimensions and orientation allows the 0014 to easily replace other models
    • Cartridge style, maintenance free, wet-rotor, in-line and single stage circulator pump
    • Unique replaceable cartridge contains all of the moving parts and allows the circulator to be easily serviced instead of replacing the entire unit
    • For indoor use only
    Item#:
    007-SF5
    Manufacturer Item:
    007-SF5
    Manufacturer:
    TACO INC.
    |◀ 5965 - 5976 of 6092 ▶|
    View: