|◀ 5761 - 5772 of 5885 ▶|
View:
Taco 007S Circulator Pump, 1/25 HP, 115 VAC , 23 gpm
  • Standard high capacity output and compact design
  • Quiet, efficient operation
  • Direct drive, low power consumption
  • Unique replaceable cartridge design-field serviceable
  • Self lubricating, no mechanical seal
  • Unmatched reliability, maintenance free
  • Universal flange to flange dimensions and orientation allows the 0014 to easily replace other models
  • Cartridge style, maintenance free, wet-rotor, in-line and single stage circulator pump
  • Unique replaceable cartridge contains all of the moving parts and allows the circulator to be easily serviced instead of replacing the entire unit
  • For indoor use only
,

,



taco 007-sf5


taco 007-sf5

Item#:
007-SF5
Manufacturer Item:
007-SF5
Manufacturer:
TACO INC.
Taco 009-SF Circulator Pump, 0 - 8 gpm
  • Standard high capacity output
  • Compact design
  • Quiet, efficient operation
  • Direct drive - low power consumption
  • Unique replaceable cartridge design - field serviceable
  • Self-lubricating
  • No mechanical seal
  • Unmatched reliability, maintenance free
  • Universal flange to flange dimensions
,
,



009-SF


009-SF

Item#:
009-SF
Manufacturer Item:
009-SF
Manufacturer:
TACO INC.
The 007-IFC features a removable integral flow check designed to improve pump performance, simplify piping and reduce installation costs. The spring-loaded IFC replaces a separate in-line flow check to ensure protection against reverse flow and gravity flow.
  • Integral Flow Check (IFC) simplifies piping, prevents reverse flow and gravity flow
  • Eliminates separate in-line flow check
  • Reduces installed costs
  • Improves system performance
  • Easy to service
  • Unique replaceable cartridge design - field serviceable
  • Unmatched reliability, maintenance free
  • Quiet, efficient operation
  • Self-lubricating, no mechanical seal
  • Flanged connections
,
,



taco 007-f5-8ifc


taco 007-f5-8ifc

Item#:
007-F5-8IFC
Manufacturer Item:
007-F5-8IFC
Manufacturer:
TACO INC.
Sludge be gone. The cleaner your storage tank, the better your fuel performs. FPPF SBG is specially formulated to eliminate sludge and water in fuel oil storage tanks. The SBG chemical base dissolves sludge in your fuel tank into a combustible substance without clogging nozzles, while maintaining clean filters and strainers. Not sure if SBG solves your fuel sludge problem? SBG is effective in #1, 2, 3, 4, 5, 6 and bunker fuels. And if you experience low combustion, SBG also helps to improve atomization and efficient combustion. Prevent the buildup of sludge and sludge-related impurities in your fuel with FPPF Sludge Be Gone. Should you be experiencing Bacteria, use our EPA registered biocide - Killem.
Item#:
00359P
Manufacturer Item:
00359P
Manufacturer:
FPPF CHEMICAL CO INC
Watts Regulator series 335 ASME rated boiler pressure relief valves were developed to fill the OEM need of the hydronic industry for a smaller valve on popular size boilers up to 510000 BTU at 30 psi. The compact design, all bronze construction and modern appearance make them an ideal choice for a wide variety of smaller size OEM boilers. ASME section IV at 30 psi set point.,
,



Watts Water 0342691


Watts Water 0342691

Item#:
0342691
Manufacturer Item:
335M2 30LB
Manufacturer:
WATTS REGULATOR CO
M335-M2 Bronze 2-Port Pressure Safety Relief Valve, 3/4", MNPT x FNPT, 30 psi Watts Regulator series 335 ASME rated boiler pressure relief valves were developed to fill the OEM need of the hydronic industry for a smaller valve on popular size boilers up to 510000 BTU at 30 psi. The compact design, all bronze construction and modern appearance make them an ideal choice for a wide variety of smaller size OEM boilers. ASME section IV at 30 psi set point.
,
,



Watts Water 0342692


Watts Water 0342692

Item#:
0342692
Manufacturer Item:
M335M2 30LB
Manufacturer:
WATTS REGULATOR CO
The 007-IFC features a removable integral flow check designed to improve pump performance, simplify piping and reduce installation costs. The spring-loaded IFC replaces a separate in-line flow check to ensure protection against reverse flow and gravity flow.
  • Integral Flow Check (IFC) simplifies piping, prevents reverse flow and gravity flow
  • Eliminates separate in-line flow check
  • Reduces installed costs
  • Improves system performance
  • Easy to service
  • Unique replaceable cartridge design - field serviceable
  • Unmatched reliability, maintenance free
  • Quiet, efficient operation
  • Self-lubricating, no mechanical seal
  • Flanged connections
Sid Harvey Item #:007-IFC: Replaces Part #:'s : 5W300V,

,



taco 007-ifc


taco 007-ifc

Item#:
007-IFC
Manufacturer Item:
007-F5-7IFC
Manufacturer:
TACO INC.
Taco 007E-2F4 Cast Iron High-Efficiency ECM Circulator Pump, 16 gpm, 120 volt, 4830 RPM Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.
  • ECM performance equivalent to the legendary 007 circulator
  • High-efficiency ECM motor uses up to 85% less electricity
  • BIO Barrier protects pump from system contaminants
  • SureStart automatically frees locked rotor condition and self-purges air from pump
  • Integral flow check (IFC) included
  • Dual electrical knockouts, 6" stranded wire leads included for easy wiring
  • Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
  • Double insulated, no ground wire required
  • Whisper quiet operation
  • Equipped with a cast iron casing and should be used for closed loop systems only
  • Circulator pumps are for indoor use only
  • Acceptable for use with water or maximum of 50% water/glycol solution
  • Composite stator housing, cartridge and impeller
  • Ceramic shaft, ceramic thrust bearing
  • EPDM O-ring and gaskets
  • Carbon bearing Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.,
    ,



    taco 007e-f4


    taco 007e-f4

Item#:
007E-F4
Manufacturer Item:
007E-2F4
Manufacturer:
TACO INC.
Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.
  • ECM performance equivalent to the legendary 007 circulator
  • High-efficiency ECM motor uses up to 85% less electricity
  • Bio Barrier protects pump from system contaminants
  • SureStart automatically frees locked rotor condition and self-purges air from pump
  • Integral Flow Check (IFC) included
  • Dual electrical knockouts, 6" stranded wire leads included for easy wiring
  • Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
  • Optional 2-way flange model reduces SKU's and provides universal fit-up to any flange position
  • Double insulated, no ground wire required
  • Whisper quiet operation
  • Composite stator housing cartridge
  • Ceramic shaft and thrust bearing
  • Carbon bearings
  • EPDM o-ring and gaskets
,
,



taco 007e-f2


taco 007e-f2

Item#:
007E-F2
Manufacturer Item:
007E-2F2
Manufacturer:
TACO INC.
For proper operation and efficient fuel consumption in oil, gas, and/or coal-fired heating appliances, draft must remain constant. When it is, combustion is more complete, fuels are utilized efficiently, and money is saved. Field Draft Controls maintain consistent draft by counteracting the negative forces caused by changes in temperature and barometric pressure, as well as the effects of wind.
  • With collar
Sid Harvey Item #:100-20: Replaces Part #:'s : x71-179,

,



Field Controls 100-20


Field Controls 100-20

Item#:
100-20
Manufacturer Item:
02722701
Manufacturer:
FIELD CONTROLS LLC
Apollo Valves 10-407-05 Bronze Safety Relief Valve, 3/4", MNPT x FNPT, 30 psig
  • Corrosion resistant construction
  • Standard stainless steel spring
  • Made in USA
Sid Harvey Item #:10-407-05: Replaces Part #:'s : 27620,
,



Apollo Valves 10-407-05


Apollo Valves 10-407-05

Item#:
10-407-05
Manufacturer Item:
10-407-05
Manufacturer:
CONBRACO INDUSTRIES INC
Apollo Valves 10-408-05 Bronze Safety Relief Valve, 3/4", FNPT x FHPT 30 psig
  • Corrosion resistant construction
  • Standard stainless steel spring
  • Made in USA
Sid Harvey Item #:10-408-05: Replaces Part #:'s : 27621,
,



Apollo Valves 10-408-05


Apollo Valves 10-408-05

Item#:
10-408-05
Manufacturer Item:
10-408-05
Manufacturer:
CONBRACO INDUSTRIES INC
|◀ 5761 - 5772 of 5885 ▶|
View: