• Intermittent ignition oil primary control with 30 sec safety timing, replacement for Honeywell R8184G Series
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with External reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models

ICM Controls ICM1502

• Provides automatic, non-recycling control of an intermittent ignition oil burner system
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Remote lockout indication
• Enclosed safety switch with External reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 volts thermostat required
• 15 second safety timing, alarm outputs, and manual safety switch
• Intermittent ignition timing

Honeywell R75-37

• With 45 sec safety timing and alarm outputs
• Provides automatic, nonrecycling control of an intermittent ignition oil burner system
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• Enclosed safety switch with External reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box, select models may be mounted directly on burner housing
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• 75 VA at 120/240 VAC, 50-60 Hz, 25 VA at 24V, 50-60 Hz alarm load ratings(pilot duty)

Honeywell R75-44

• Interrupted duty ignition for high efficiency
• SMC technology for safety monitoring
• Diagnostic LED indicators
• Secondary burner control has a input voltage rating of 120 VAC, input frequency rating of 60 Hz and input power rating of 10 VA from limit circuit
• 15 sec trial for Ignition 40200 (1.3 sec flame failure response time (FFRT))
• 30 sec trial for Ignition 42230 (1.3 sec flame failure response time (FFRT)
• Recycle on flame failure
• It has a temperature rating of 32 - 140 deg F and resistive rating of 1500 ohm
• Valve delay on/motor delay off for economic as well as efficient performance
• It has a motor load of 10 FLA/60 LRA and ignitor load of 120 VAC at 60 Hz
• 500 VA motor load

Carlin Parts R75-45

• Operates the oil burner and oil valve (if desired) in response to a call for heat from a low voltage control circuit
• Intermittent ignition is on while the burner is on
• Solid state flame sensing circuit
• External button to manually reset safety switch after lockout
• Enclosed safety switch must be manually reset after safety shutdown
• R8184M includes 40 VA transformer and Y and G terminals for connection of cooling equipment
• Mounts on standard 4 x 4" junction box
• C554A cadmium sulfide flame detector and 24 VAC thermostat required

Honeywell R75-58

• Interrupted duty ignition
• 15 sec trial for Ignition 40200 (1.3 sec flame failure response time (FFRT))
• Recycle on flame failure
• Thermostat/aquastat compatible
• SMC (safety monitoring circuit) technology

Carlin Parts R77-10

• Interrupted duty ignition
• Recycle on flame failure
• Serviceman reset protection (latch-up after 3-consecutive lockouts)
• Diagnostic LED
• Valve delay on/motor delay off (pre/post-purge)
• 15 sec trial for ignition (TFI) other timings available
• 1.3 sec flame failure response time (FFRT)
• Alarm contacts
• Thermostat/aquastat compatible
• SMC (safety monitoring circuit) technology

Carlin Parts R77-44

• Interrupted duty ignition for high efficiency
• SMC technology for safety monitoring
• LED indicators, alarm contacts and pump prime for economic as well as efficient performance
• Serviceman reset protection ( latch-up after three consecutive lockouts)
• 15 sec trial for ignition (TFI) other timings available
• It offers recycle on flame failure and 1.3 sec flame failure response time
• Oil primary control has a input voltage rating of 120 VAC, input frequency rating of 60 Hz and input power rating of 9 VA
• It has a temperature rating of 32 - 140 deg F, resistive rating of 1500 ohm and safety switch timing of 15 sec
• Primary control offers serviceman reset protection and valve delay on/motor delay off feature
• It has a motor load of 10 FLA/60 LRA, ignitor load of 120 VAC at 60 Hz and valve load of 120 VAC at 60 Hz
• 500 VA motor load
• 24 VAC/VDC, 2 amp alarm contacts
• Flame signal test jack

Carlin Parts R77-41

• Interrupted duty ignition
• Recycle on flame failure
• Serviceman reset protection (latch-up after 3-consecutive lockouts)
• Diagnostic LED
• 15 sec trial for ignition (TFI) other timings available
• 1.3 sec flame failure response time (FFRT)
• Alarm contacts
• Thermostat/aquastat compatible
• SMC (safety monitoring circuit) technology

Carlin Parts R77-40

Riello Parts 7001010

• 45 sec trial for ignition
• Red LED lockout indicator
• Thermostat/aquastat compatible SMC (safety monitoring circuit) technology
• 5 amp full load, 60 amp locked rotor motor load
• 120 VAC, 60 Hz, 500 VA igniter load

Carlin Parts R75-47

• Quick and easy installation without special tools, no set screws to adjust or loosen
• Secure, accurate fit with precision, die-molded caps
• Simple length adjustment - connectors readily cut to desired length
• Unsurpassed durability with tough polyurethane connector and glass reinforced acetal end caps
• Wont become brittle even during normal temperature and humidity extremes
• Metal-to-metal connection is eliminated - quiet operation even at high speeds

Pioneer Products 148-7