|◀ 229 - 240 of 5885 ▶|
View:
Copeland ZR28K5E-PFV-800 Scroll Compressor, 2-1/4 Ton, 28,000 BTU, 208/230 VAC 1 PH POE Oil R22
  • Internal inherent protection
  • Optimized scroll and seal design
  • High efficiency motor
  • Improved temperature protection
  • Larger shaft bearing system
  • Internal pressure protection
  • Quiet, reliable operation
  • Legacy Copeland Scroll fixed speed compressor
  • Low-pressure applications (R-22, R-407C)
  • Air Conditioning
Replacement Parts Below
918-0052-00 CRANKCASE HEATER KIT 240V 40W Wrap Around
918-0052-01 CRANKCASE HEATER KIT 120V 40W Wrap Around
527-0044-15 SPACER - MOUNTING ASSM
914-0037-36 RUN CAP KIT
529-0060-24 Molded Power Cable Plug,
,



COPELAND ZR28K5EPFV800


COPELAND ZR28K5EPFV800

Item#:
ZR28K5EPFV800
Manufacturer Item:
ZR28K5E-PFV-800
Manufacturer:
COPELAND LP
  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    INTERNATIONAL COMFORT PRODUCTS FXM4X1800AL

  • Item#:
    FXM4X1800AL
    Manufacturer Item:
    FXM4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Embassy Industries KRP6 Panel-Track Baseboard 6' x 3/4" Element 419 BTU's Per Foot @ 4 GPM 160 Degree Water
    Panel-Track (KPT) baseboard is ideal for any type of residential or light commercial installation. With its rugged front panel, efficient operation, superior design and ease of installation, Panel-Track is the best baseboard in the industry. Today's Panel-Track is the culmination of more than 40 years of research and development by Embassy's heating specialists and engineers and is clearly the baseboard of choice by today's heating professionals.
    • Contemporary deep-drawn seamless end caps without unsightly weld spots
    • Panel-Track has a modern, streamlined design
    • The high-luster white finish blends beautifully with traditional and contemporary colors
    • Finger-touch snap-on damper opens and closes with ease, without the use of hinges which can bind or loosen with age
    • Easy to install heating element
    • One end of each heating element is expanded for simple end-to-end sweat connecting
    • Hanger brackets with built-in return
    • 3/4" copper tube with 2-1/8" x 2-1/8" x 0.008" aluminum fin
    • 60 fins/feet spacing
    Sid Harvey Item #:KRP6: Replaces Part #:'s : 2H985,

    ,



    Embassy Industries KRP6


    Embassy Industries KRP6

    Item#:
    KRP6
    Manufacturer Item:
    5612231206
    Manufacturer:
    EMBASSY INDUSTRIES
    Peerless Boiler Parts 91131 Oil Burner Carlin WBV-03 W/harness
      ,
      ,



      peerless boiler parts 91131


      peerless boiler parts 91131

    Item#:
    91131
    Manufacturer Item:
    91131
    Manufacturer:
    CARLIN COMBUSTION TECHNOLOGY
    Therma-Flow E70GL Rear Flue Oil-Fired Water Heater, 70 Gallon
    • Designed and built to provide the homeowner and commercial user with dependable, highly efficient, production of hot water within a durable, long lasting water heater unit
    • All units are periodically tested by an independent laboratory to assure the highest achievable ratings for efficiency and reliable hot water flow
    • Ease of maintenance
    • All piped fittings are accessible from the front of the heater for servicing
    • The"female" temperature and pressure adapter will directly accept the"male" temperature and pressure relief valve
    • An extra large observation door for flame inspection and testing
    • Piping feeds slightly different on copper unit
    • Attractive baked enamel steel jacket
    • High density blanket insulation
    • Quality, fuel efficient beckett or carlin flame retention burner
    • Burner and immersion type dual aquastat prewired at factory
    • Oil burner nozzle is installed at factory
    • 6" diameter flue collar
    • 1 firing rate
    ,
    ,



    Therma-Flow Water Heaters 690-34


    Therma-Flow Water Heaters 690-34

    Item#:
    690-34
    Manufacturer Item:
    E70GL
    Manufacturer:
    THERMA-FLOW, INC.
    Features:
    Enhanced controls:
  • Temperature limit control
  • LWCO Function
  • Thermal pre-purge function Rear ue outlet
  • Top ue available with optional kit Easy service
  • Swing-away burner door
  • Top access cleanout cover
  • Plug-in wiring harness High efciency oil burner
  • OWT With Solenoid valve
  • PSC motor
  • Solid state ignitor
  • Cast iron sections with built-in air separator
  • Insulated heavy-gauge steel jacket
  • Item#:
    OWT-3-T-S3
    Manufacturer Item:
    OWT-3-T-S3
    Manufacturer:
    WILLIAMSON -THERMOFLO
    Sid Harvey F2-19 Sludge Dispersant and De-Icer, 1 Gallon, Tip-n-Pour Spout,Sid Harvey Item #:F2-19: Replaces Part #:'s : 1M139,
    ,



    F2-19


    F2-19

    Item#:
    F2-19
    Manufacturer Item:
    F2-19
    Manufacturer:
    SID HARVEY INDUSTRIES INC.
    Sid Harvey F5-21 Vacuum Pump OilGallon,
    ,



    Sid Harvey F5-21


    Sid Harvey F5-21

    Item#:
    F5-21
    Manufacturer Item:
    DVO-24
    Manufacturer:
    MITCO MFG.
    Weil-McLain Evergreen EVG 155 Cast Iron High-Efficiency Condensing Natural Gas Fired Water Boiler, 0.951 AFUE, 155 MBH Input, 143 MBH Heating
    • Stainless steel fire tube heat exchanger with non-metallic base
    • Modulating condensing boiler
    • 4 pump/auxiliary outputs (example: 1 boiler loop pump plus 3 zone pumps)
    • Up to 8 multiple boiler control with lead/lag rotation
    • Modbus to BMS connectivity
    • Each input can be assigned to a priority (up to 3 priorities)
    • Multiple inputs can be assigned one priority (zone based control)
    • All lag boiler inputs and output can be used
    • 0-10 VAC Input (modulation or set point)
    • Configurable auxiliary input/output system
    • Boiler circulator - taco ECM 007e (70/110), taco ECM 0015e (155)
    • Negative regulated combustion
    • 5 to 1 turndown ratio (70-155)
    • Propane conversion kit, low water cut-off, water treatment - inhibitor and test kit
    • Easy installation with setup wizard, zone and/or priority based control, (3) thermostat inputs, outdoor reset for each priority, rate adjustable per priority
    • Fully removable jacket front door, adjustable boiler legs
    • Mounting bracket ready for wall mount kit shipped standard with 70-155
    • Condensate trap
    • 12-year heat exchanger limited warranty, 5-year parts limited warranty

    ,
    ,



    weil-mclain evg155


    weil-mclain evg155

    Item#:
    EVG155
    Manufacturer Item:
    383-900-006
    Manufacturer:
    WEIL-MCLAIN
    Sid Harvey F4-11 Disinfecting Foam Evaporator Coil Cleaner Aerosal,
    ,



    F4-11


    F4-11

    Item#:
    F4-11
    Manufacturer Item:
    F4-11
    Manufacturer:
    MITCO MFG.
  • Factory tested
  • Easy service - 1-piece access door, all controls in easy reac
  • High efficiency - generous heating surface, automatic vent damper
  • Rugged construction for long life, stainless steel burners, integral cast iron legs, integral draft diverter, insulated heavy gauge steel jacket, heavy gauge aluminized steel flue collector
  • 24 VAC combination gas valve
  • Gauge glass and guard assembly
  • Pressure gauge and siphon assembly
  • Pressure limit control
  • Probe low water cut-off
  • High temperature limit control
  • 15 psig ASME relief valve
  • Drain valve
  • Spark ignited (intermittent) pilot system, electronic ignition/flame supervisory control
  • 10 years limited warranty on boiler sections, 1 year limited warranty on parts
  • Item#:
    GSA-150-N-IP-S2
    Manufacturer Item:
    GSA-150-N-IP-S2
    Manufacturer:
    WILLIAMSON -THERMOFLO
  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • Item#:
    FVM4X6000BL
    Manufacturer Item:
    FVM4X6000BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 229 - 240 of 5885 ▶|
    View: