Features:

AFUEs above 91%

Sealed combustion or direct exhaust venting

PVC, polypropylene, or stainless steel venting

Multiple pass heat exchanger

Cast iron primary heat exchanger

Stainless steel condensing secondary heat exchanger

Control module with indicator lights

Inferred heat program providing automatic adjustment of boiler water temperature to match demand

Hot surface ignition system

Insulated heavy-gauge steel jacket

GWI-58-N-T-S3-W

Copeland ZR54K5E-TF5-800 Scroll Compressor, 4-1/2 Ton 54,000 BTU, 208/230 VAC 3 PH POE OIL R22

• nternal inherent protection
• Optimized scroll and seal design
• High efficiency motor
• Improved temperature protection
• Larger shaft bearing system
• Internal pressure protection
• Quiet, reliable operation
• Legacy Copeland Scroll fixed speed compressor
• Low-pressure applications (R-22, R-407C)
• Air Conditioning

Replacement Parts Below
918-0041-00 1 Crankcase Heater 240V 40W Wrap Around
918-0041-01 1 Crankcase Heater 120V 40W Wrap Around
527-0116-00 1 Spacer Mounting Assembly
529-0060-24 1 Molded Power Cable Plug,
,

COPELAND ZR54K5ETF5800

COPELAND ZR54K5ETF5800

HORIZONTAL FAN COILS

FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons

FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons

Horizontal application only

Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW

40 VA 208/230v160 transformer

All Models use R410A TXV metering device

Adjustable condensate drainpan

FMC4X & FMC4Z

Horizontal return applications require field fabricated bottom cover

Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193

Cabinets constructed to prevent cabinet sweating

Refrigerant lines and electrical connections can be run out the back or side of casing

PERFORMANCE

PSC motor on all FMU4X & FMC4X models

ECM motor on all FMU4Z & FMC4Z models

EASY TO INSTALL AND SERVICE

Acoil design for maximum surface area

Multiple electrical, refrigerant lineset and drain line entry for application flexibility

Primary and secondary drain connections exit from the back or side of the cabinet

Supports furreddown ceiling open return and ducted return applications

Sweat connections for long term reliability

Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position

FMU4Z1800AL

Crown Boiler Mega-Stor II MS2-075 444 Stainless Steel Indirect Water The mega-stor II is a stainless-steel, indirect water heater that provides abundant domestic hot water powered by a variety of efficient Velocity boilers to fit every application. Available in several sizes, it has a rugged design with a coated steel jacket and heavy-duty polymer top and bottom to resist cracks and abrasions. This product is robotically welded, hydrostatically tested and passivated for maximum corrosion resistance.,
,

crown boiler ms2-075

crown boiler ms2-075

Buderus 7738004855 Buderus Oil Burner Kit Carlin Oil Burner G115WS/5,
,

7738004855

7738004855

Thermo Pride OL6RA072D48 Lowboy Oil Furnace, 86.5 - 87% AFUE, 120 volt, 60000 - 90000 BTU, 400 cfm

• Rear flue
• High efficiency flame retention Beckett burner
• Dual service/clean-out ports placed for easy access
• 4 Ton cooling capacity
• Burner and controls enclosed in vestibule for safety and quiet operation
• Advanced high efficiency controls mounted at the front of cabinet for easy setup and access
• 18" width x 20" depth supply air outlet
• 18" height x 18" depth return air outlet
• 7" flue diameter
• Rounded corners and interlocking cabinet panels give added stability and quiet operation
• 13 ga octatherm heat exchanger delivers higher efficiency and combustion observation port for easy burner calibration
• 8-heat exchanger size identifier
• Exclusive copper coated heat exchanger provides corrosion resistance and superior heat transfer,
  
  ,
  
  
  
  

  Thermo Pride OL6RA072D48

  
  

  Thermo Pride OL6RA072D48

Peerless Boiler WV-DV-03WPCTL Oil Fired Cast Iron Boiler Water Package Riello Burner W/Coil W/Vent Kit
The series WBV/WV residential, oil-fired boilers are available for use with both hot water and steam systems and designed for natural draft (chimney) venting. The fully-packaged or knockdown boilers are available in 3 sizes (3 - 5 sections) with 8 firing rates. Features of the series WBV/WV boilers include a full plate swing-out door and convertible rear to top flue outlet (for 3 and 4-section boilers only). Honeywell operating controls, Taco circulators (water boilers) and probe type low water cut-off (steam boilers) are standard. A deluxe, insulated enameled steel jacket on all boilers reduces heat loss. The cast iron sections are assembled with steel push nipples and factory tested to assure a water tight seal.

• High efficiency, flame retention burners, choice of beckett, Carlin or Riello
• Cast iron sections are factory tested and assembled with steel push nipples
• Large water content, wet base section design are ideal for steam and large volume hot water applications
• Rear or top flue convertibility
• Deluxe powder coated steel jacket - reduces boiler heat loss
• Full plate swing out door - for quick and easy cleaning
• Boiler reset control with low water cut-off for increased efficiency and safety
• Taco circulator pump
• Temperature - pressure gauge
• Drain valve
• Top cleanout
• Built-in air elimination baffle
• All residential cast iron boilers include 1 year warranty and a limited, lifetime warranty is provided for the cast iron sections of Peerless residential hot water boilers,
  ,
  
  
  
  

  peerless boiler wv-dv-03wpctl

  
  

  peerless boiler wv-dv-03wpctl

Features:

AFUEs above 91%

Sealed combustion or direct exhaust venting

PVC, polypropylene, or stainless steel venting

Multiple pass heat exchanger

Cast iron primary heat exchanger

Stainless steel condensing secondary heat exchanger

Control module with indicator lights

Inferred heat program providing automatic adjustment of boiler water temperature to match demand

Hot surface ignition system

Insulated heavy-gauge steel jacket

Viessmann CU3A352 Vitocrssaal Floor Standing Boiler 43-160k BTU
,
,

CU3A352

CU3A352

Copeland ZR54K5E-PFV-800 Scroll Compressor, 4-1/2 Ton 54,000 BTU, 208/230 VAC 1 PH POE Oil R22

• Internal inherent protection
• Optimized scroll and seal design
• High efficiency motor
• Improved temperature protection
• Larger shaft bearing system
• Internal pressure protection
• Quiet, reliable operation
• Legacy Copeland Scroll fixed speed compressor
• Low-pressure applications (R-22, R-407C)
• Air Conditioning

Replacement Parts Below
918-0041-00 Crankcase Heater 240V 40W Wrap Around
918-0041-01 Crankcase Heater 120V 40W Wrap Around
527-0116-00 Spacer Mounting Assembly
914-0037-38 RUN CAP KIT
529-0060-24 Molded Power Cable Plug,
,

COPELAND ZR54K5E-PFV-800

COPELAND ZR54K5E-PFV-800

HORIZONTAL FAN COILS

FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons

FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons

Horizontal application only

Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW

40 VA 208/230v160 transformer

All Models use R410A TXV metering device

Adjustable condensate drainpan

FMC4X & FMC4Z

Horizontal return applications require field fabricated bottom cover

Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193

Cabinets constructed to prevent cabinet sweating

Refrigerant lines and electrical connections can be run out the back or side of casing

PERFORMANCE

PSC motor on all FMU4X & FMC4X models

ECM motor on all FMU4Z & FMC4Z models

EASY TO INSTALL AND SERVICE

Acoil design for maximum surface area

Multiple electrical, refrigerant lineset and drain line entry for application flexibility

Primary and secondary drain connections exit from the back or side of the cabinet

Supports furreddown ceiling open return and ducted return applications

Sweat connections for long term reliability

Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position

International Comfort Products FMU4X2400AL

Crown Boiler Mega-Stor II MS2-050 444 Stainless Steel Indirect Water The mega-stor II is a stainless-steel, indirect water heater that provides abundant domestic hot water powered by a variety of efficient Velocity boilers to fit every application. Available in several sizes, it has a rugged design with a coated steel jacket and heavy-duty polymer top and bottom to resist cracks and abrasions. This product is robotically welded, hydrostatically tested and passivated for maximum corrosion resistance.,
,

crown boiler ms2-050

crown boiler ms2-050