Brand Name
Part Type
Category
|◀ ◀ 229 - 240 of 316 ▶ ▶|
View:

B-Vent Pipe 10" x 24" Natural Gas Aluminum Inner & Galvanized Steel Outer

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
  • Deep locking groove assures solid joint and secure lock
  • Corrosion resistant aluminum inner wall for rapid warm-up
  • Unique locking band provides 360 deg turning radius of the pipe and fittings
  • Locking band slides over tabs easily, locks firmly without twisting
  • Locking tabs hold pipe securely together, can be easily unlocked
  • Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
  • Reinforced ends curled bead on end of outer pipe for rigidity and strength
  • The allowable minimum clearance to combustibles is 1"
  • A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,


    10RP24


    10RP24

Item#:
10RP24
Manufacturer Item:
016601
Manufacturer:
HART & COOLEY, LLC.
 
Hart& Cooley-B-Vent_Catalog_Broc

Control Board >>LIMITED STOCK CLEARANCE ITEM<<

Heat Controller Heating Parts 62-25341-81 Control Board


62-25341-81

Item#:
62-25341-81
Manufacturer:
HEAT CONTROLLER LLC

Body Gasket Used On S69-BF1 Pump >>LIMITED STOCK CLEARANCE ITEM<<

Armstrong Pumps 106592-000 Body Gasket



Armstrong Pumps 106592-000

Item#:
106592-000
Manufacturer Item:
106592-000
Manufacturer:
ARMSTRONG PUMPS INC

RX-11 System Flush 13 Lb. Canister

Nu-Calgon 4300-15 RX-11 System Flush 13 Lb. Canister



4300-15


4300-15

Item#:
4300-15
Manufacturer Item:
4300-15
Manufacturer:
NU-CALGON
 
4300-15_Broc

Receiver Valve 1/4" NPT x 3/8" Flare >>LIMITED STOCK CLEARANCE ITEM<<

Mueller Industries A11030 Receiver Valve 1/4" NPT x 3/8" Flare

A11030

Item#:
A11030
Manufacturer Item:
A 11030
Manufacturer:
MUELLER STREAMLINE CO

Refrigeration Ball Valve 5/8" OD W/Extended Tubes >>LIMITED STOCK CLEARANCE ITEM<<

Mueller Industries A14852 Refrigeration Ball Valve 5/8" OD W/Extended Tubes

A14852

Item#:
A14852
Manufacturer Item:
A 14852
Manufacturer:
BALL VALVES

Straight Packless Diaphragm Valve 1/2" OD Brass Body

Mueller Industries A14851 Refrigeration Ball Valve 1/2" OD W/EXT



A14851


A14851

Item#:
A14851
Manufacturer Item:
A 14851
Manufacturer:
BALL VALVES
 
A14851_Spec

Refrigeration Shut Off Valve 1/4" Flare >>LIMITED STOCK CLEARANCE ITEM<<

Mueller Industries A14833 Refrigeration Shut Off Valve 1/4" Flare

A14833

Item#:
A14833
Manufacturer Item:
A14833
Manufacturer:
BALL VALVES

Oil Burner Carlin Williamson >>LIMITED STOCK CLEARANCE ITEM<<

Williamsom-Thermoflo Parts CB-BLR-145-S2 Oil Burner Williamson

CB-BLR-145-S2

Item#:
CB-BLR-145-S2
Manufacturer Item:
CB-BLR-145-S2
Manufacturer:
CARLIN COMBUSTION TECHNOLOGY

Water Cooled Refrigeration Condensing Unit 3 HP 230/1 R22, R134A, R404A,R407A,R407C

The future of refrigeration is here and Copeland is leading the way with technology has been designed for maximum efficiency and a full range of low-GWP refrigerants. Beyond our next-gen Copeland compressors that live at the heart of the refrigeration system that you have depended on. Helping your business while helping you get prepare for tomorrows challenges today. Refrigeration Condensing Unit 2 HP 230/1 R22, R134A, R404A, R407A, R407C



FFWP030ZCFV020


FFWP030ZCFV020

Item#:
FFWP030ZCFV020
Manufacturer Item:
FFWP-030Z-CFV-020
Manufacturer:
COPELAND LP
 
FFWP030ZCFV020_Spec

Screws Zip-In Zinc-Plated Steel Indented Hexagonal Washer Head #8 x 3/4" 1000/PK

Malco HW8X3/4Z-10M Zinc-Plated Steel Indented Hexagonal Washer Head



HW8X3/4Z-10M


HW8X3/4Z-10M

Item#:
HW8X3/4Z-10M
Manufacturer Item:
HW8X3/4Z
Manufacturer:
MALCO PRODUCTS, INC.
 
Malco-Scews_Broc

InnoFlue Polypropylene Horizontal Concentric Vent Kit 3"

  • Across North America, home owners, maintenance professionals, contractors, distributors, engineers and heating equipment manufacturers are recognizing the unmatched value InnoFlue delivers to the HVAC industry.
  • Manufactured from environmentally friendly polypropylene, InnoFlue has been tested and is listed to all relevant American, Canadian and European Safety Standards. It is listed and warranted for sustained flue gas temperaturesup to 230°F (110°C), thus providing enhanced performance properties and significant safety margins. Centrotherm offers a comprehensive product line including test/inspection ports, condensate drains, siphons, flue collar adaptors, as well as excellent technical, sales and marketing support.

    InnoFlue Vent Systems are professional, reliable, environmentally sustainable and offer substantial labor savings due to reduced installation times.
  • Ease of Installation
  • Integrated gasket system allows for:
  • Faster, cleaner, V.O.C.-free installation
  • Immediate use of appliances upon installation
  • Post-installation adjustments
  • No fit up, couplers, primers or adhesives needed
  • Light weight makes for easy handling and rapid installation
  • New 1/4 pitch for 2, 3 and 4 Single Wall vent systems
  • Health and Safety ETL Listed: UL 1738, ULC-S636 Listed: CE EN 14471
  • Performs at sustained flue temperatures up to 230°F (110°C)
  • Listed at zero clearance to combustibles for all systems configurations
  • Environmentally-friendly polypropylene is 100% recyclable
  • Industry leading wall thickness enhances structural durability
  • Chloride free


    ISVKH03


    ISVKH03

    • Item#:
    ISVKH03
    Manufacturer Item:
    ISVKH03
    Manufacturer:
    CENTROTHERM ECO SYSTEMS
     
    Centrotherm Eco Systems_Broc
    |◀ ◀ 229 - 240 of 316 ▶ ▶|
    View: