Appion MGAVCR Magaflow Access Valve Core Removal Tool, 5/16"

Appion MGAVCR

Diversitech MBK-6 NITRO KIT Nitro & CO2 Drain Kit
The Drain Kit is an over the shoulder refillable, nitrogen or CO2 mini drain cleaning kit. Featuring a small cylinder that holds 9 cubic feet of nitrogen or 2-1/2 pounds of CO2. The cylinder includes an integral mounted regulator for quick and easy adjustment of discharge pressure. Get exactly the amount of pressure you need with a quick adjustment on the regulator. Furnished complete with an 87" hose and drain gun kit, the CW-15 whip hose, and the AP-DK Drain Kat Accessory Fitting Kit which contains the DF-75 Drain Dawg inflatable tip, the CB-03 3/4 - 1" cone fitting, the FA-01 male to male CO2 to nitrogen adapter, the FA-03 CO2 trans-fill adapter, and the QN-S3 needle tip. Made in the USA.

• 250 psi adjustable regulator with internal bleed-down safety
• Dual inlet and outlet gauges
• On/Off valve
• 87" hose provides extra reach
• Compact lightweight case
• Universal cone, adjustable shoulder strap included
• Clearing clogged drains, purging with nitrogen and coil cleaning applications
• Weighs less than 7 lbs

,
,

Diversitech MBK-6 NITRO KIT

Sealed Unit Parts MAGTRACT Retractable Magnetic Jumper, 30 volt, 5 amp, 20" L

• For diagnostic use only
• Not intended for permanent installation

,
,

Sealed Unit Parts MAGTRACT

Appion MGABAS Basic Megaflow Kit
The MegaFlow Basics Kits help a technician remove restrictive valve cores and perform AC/R system evacuations up to 10x faster. With these high conductance speed AC/R evacuation essentials, your vacuum pump can finally reach it's true potential.

• Vacuum-Rated components to 20 microns
• Helps technicians perform AC/R system evacuations up to 10x faster
• Opens up over 90% of internal diameter of access port
• Allows up to 16x more flow than 1/4" hose
• Ultra-Flexible Large Diameter 1/2in Hoses - Get into tight spaces and significantly reduce evacuation times
• Vacuum-Rated hoses don't collapse or permeate,
  ,
  

  Appion MGABAS

Fieldpiece Instruments Wireless Micron Gauge,

Fieldpiece Instruments MG44

Yellow Jacket 18975 4-In-1 Vacuum/Charge Ball Valve Core Removal Tool, 1/4"

• 4-in-1 ball valve tool is perfect for vacuum, charge, cores and recovery
• Extra 1/4" side port on the 18975 to attach electronic micron vacuum right at the system for greater accuracy or to add refrigerants
• Core removal allows recovery unit to work at maximum efficiency, speeding the recovery process

,

Yellow Jacket M10-35

JB Industries MSKIT3 Minisplit Basci Tool Kit,
,

JB Industries MSKIT3

JB Industries A32004 Access Valve Core Removal Tool, 1/4"

JB Industries M14-54

Mitco M6 M6 Oil Pump Kit 1&5Gallon Cans,
,

Sid Harvey M6

Henry Technologies 9298 SAE Flare Side x MPT Bottom Positive Oil Exchange Valve for Semi-Hermetic Type Compressors and HCFC/HFC Refrigerants, 500 psi

• Easy-to-install
• Reduces service time and cost
• Designed for oil charge and drain
• Pressure gauge connection with Schrader valve
• Full port valve for fast charging and draining
• Designed to be permanently fitted to the compressor for future servicing
• SAE Flare gauge connection with Schrader valve

,
,

Henry Technologies M6-1

Uniweld Nitrovue NV1 Nitrogen Flow Indicator, 1/4" Female Flared CGA NitroVue simplifies the purging of nitrogen during the brazing of copper tubing in Air Conditioning and Refrigeration systems with an easy to read flow indicator label and a precision adjustable valve to control the low flow of nitrogen gas. The bright orange float ball and tube are fortified and protected in the aluminum body with wide open windows for a clear view. The easy to see orange float ball visually confirms the nitrogen is flowing and allows the technician to first PURGE the copper lines at 20+ SCFH and then reduce the flow to BRAZE at 3-5 SCFH during the brazing process thus conserves its consumption and reduces operating cost. The nitrogen must be flowing to displace the oxygen inside the tubing during the brazing process, preventing internal oxidation and the resulting scale. Scale build up inside the tubing can cause blockage in the TXV and within the Air Conditioning and Refrigeration system resulting in premature failure. If the ball does not rise in the tube there is no flow of nitrogen only static pressure and oxygen is not being displaced. The NV1 must be connected to a Nitrogen Regulator with the delivery pressure set at 60 PSI to control the nitrogen gas pressure. The NV1 is protected from over pressure with a reseatable safety blow off that opens at 200+ psi.,
,

Uniweld NV1

Nest NC2100ES Outdoor Security Camera White,
,

Nest Labs NC2100ES