Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 1129 - 1140 of 1200 ▶ ▶|
View:

92% Modulating Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement

    International Comfort Products R92MSN0601714A

    • Item#:
    R92MSN0601714A
    Manufacturer Item:
    R92MSN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92MSN-ICP_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications

    International Comfort Products R80MSL0701716A

    • Item#:
    R80MSL0701716A
    Manufacturer Item:
    R80MSL0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    Up to 97% Multi-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products R96MSN0401712A

    • Item#:
    R96MSN0401712A
    Manufacturer Item:
    R96MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R96MSN-ICP_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products R80MSN0701412A

    • Item#:
    R80MSN0701412A
    Manufacturer Item:
    R80MSN0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    Heat Pump Condensing Horizontal Discharge 2.5 Ton

    Energy Efficiency 13.8 - 16.0 SEER2 / 11.2 - 13.0 EER2
  • Levels as low as 65 dBA Design Features
  • Small footprint
  • Durable cabinet
  • All steel cabinet construction
  • Mesh coil guard Reliability, Quality and Toughness
  • Scroll compressor
  • Factory-supplied filter drier
  • High pressure switch
  • Line lengths up to 250ft (76.2m)
  • Low ambient cooling (down to 0°F / -18°C) with approved low ambient accessory kits.

    International Comfort Products S4A5S30AKAWA

    • Item#:
    S4A5S30AKAWA
    Manufacturer Item:
    S4A5S30AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    S4A5S30AKAWA_Install
    S4A5S30AKAWA_Spec
    S4A5S30AKAWA_Warranty_Misc

    Air Conditioning Condensing Unit High Efficiency 3 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll® Ultratech compressors on all models
  • Filter-drier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • High and low pressure switches
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self-configuring installation capabilities with Ion® System Control
  • Outdoor temperature sensor factory installed (for use with Ion System Control only)
  • Ball Bearing PSC fan motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Ion® Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • Only two screws to access control panel
  • Factory charged with R-410A refrigerant BUILT TO LAST
  • High gloss, baked-on powder coat finish over galvanized steel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style

    International Comfort Products TCA736GK

    • Item#:
    TCA736GK
    Manufacturer Item:
    TCA736GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TCA7-ICP-Warranty_Misc

    Ion Black System Control

    International Comfort Products Ion Black System Control

    International Comfort Products SYST0201CW

    Item#:
    SYST0201CW
    Manufacturer Item:
    SYST0201CW
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Remote Room Sensor TSTAT0201CW Communicating Wall Control with Wi-Fi

    International Comfort Products Fast Parts

    International Comfort Products Fast A/C Parts SYSTXIIRRS01

    Item#:
    SYSTXIIRRS01
    Manufacturer Item:
    SYSTXIIRRS01
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Ion System 4 Zoning Panel

    International Comfort Products Fast Parts
    Ion System 4 Zoning Panel

    International Comfort Products Fast A/C Parts SYST0101ZP

    Item#:
    SYST0101ZP
    Manufacturer Item:
    SYST0101ZP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Tempstar Heat Pump Condensing Unit High Efficiency 2 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TCH624GK

    • Item#:
    TCH624GK
    Manufacturer Item:
    TCH624GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TCH624GK_Spec

    Air Conditioning Condensing Unit High Efficiency 2.5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Filterdrier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil PERFORMANCE
  • Communicating, selfconfiguring operation when used with Observer Wall Control (TSTAT0201CW)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • High gloss, bakedon powder coat finish over galv. steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style

    International Comfort Products TSA630GK

    • Item#:
    TSA630GK
    Manufacturer Item:
    TSA630GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSA6-ICP-Parts_Misc
    TSA6-ICP_Install
    TSA6-ICP_Spec

    Tempstar Heat Pump Condensing Unit High Efficiency 3 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll Ultratecht compressors on all models
  • Crankcase Heater factory installed
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • High and low pressure switches
  • Discharge gas thermostat
  • Copper tube / aluminum fin coil PERFORMANCE
  • Self configuring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC Fan Motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products

    Tempstar TCH636GK

    • Item#:
    TCH636GK
    Manufacturer Item:
    TCH636GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TCH636GK_Spec
    |◀ ◀ 1129 - 1140 of 1200 ▶ ▶|
    View: