Malco M2002 Snip Right Cut Green,

Malco M2002

Malco Max2000 M2005 Bulldog Notching and Trimming Aviation Snip, 0.062" Aluminum, 0.054" Copper and Galvanized Steel, 0.048" Mild Steel, 0.038" Stainless Steel, 10" Overall Length

The Bulldog aviation snip has high-leverage, snub-nosed alloy steel blades, with a serrated lower blade
• The Bulldog allows controlled notching and trimming out to the blade tip in heavy gauge metal or layered metal and seams
• Precisely ground blade tips also cut into tight spaces and flush to 90 deg walls
• Notches and trims to blade tip in heavy or layered metal
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Narrower grip opening accommodates large or small hands without sacrificing cutting length
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up
  
  

  M2005

Midwest Snips forged blade UPRIGHT aviation snips are the world's best! We offer two models in this product category  a left and a right. These models were developed and design patented by Midwest Tool And Cutlery Company in response to NIOSH (National Institution of Occupational Safety and Health) research conducted by a major university ergonomics department and test data collected from representatives of the sheet metal workers trade. UPRIGHT aviation snips offer ergonomic advantages and are ideal for use in confined spaces, and overhead use.

Faster! 90 deg Blade to handle design - use pushing away from body or pulling toward body - use blades up or blades down
• Easier! Ergonomically superior design - improves wrist range motion, Use without changing positions by changing hands, Ideal for use in confined spaces
• Safer! positions hand above material - patented handle design provides secure grip and protects hand from working surface, Latch keeps blades safely closed when snip is not in use
• Longest lasting cutting edge - blades are hot drop forged of molybdenum alloy steel and austemper heat treated
• Strongest blades - Hot drop forged process uses grain structure of steel to produce maximum strength
• Optimum serrations - blades serrated 40 serrations per" to securely grip material without scarring
• Highest quality components grade 8 blade pivot bolt and heavy duty double overwind spring are unconditionally guaranteed
• Compound leverage multiplies handle force to cutting blades by 8 : 1 power ratio
• Strongest handles - High tensile strength steel will not bend from hand pressure and provides most efficient conversion of hand force to cutting power
• Comfortable handle grips - Thick textured Santoprene grips comfort user's hand and prevent steel handles from wearing through
• Easiest used in right hand
  
  

  P6900R

Midwest Snips forged blade offset model aviation snips are the world's best! we offer 3 different blade pattern models and 2 blade hardness options in this product category as well as 2 tradesmen sets. These models perform superior to respective model ASME Performance Requirements. Our offset model aviation snips are"The Sheet metal Tradesman's Choice" because they are truly the easiest models to use in a variety of sheet metal cutting applications. The offset blade pattern flows material away from the blades. This allows the snip to move forward without interference when making cuts through long sheets. It also allows the snip to cut tighter curves than other blade pattern models. The left and right blade pattern models cut the tightest curves while the straight blade pattern offers a slightly longer length of cut.

Faster! cuts"pinch-thru-point" and requires less hand force - precision cuts completely to blade tip end which reduces cutting strokes and enables complete and accurate trim cuts
• Easier! Stays in adjustment and flows material away from blades - blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation, offset blade pattern flows material away from blades for a smooth forward cutting action
• Safer! lifts hand above material and ergonomic handle width opening - keeps hand safely above sharp edges of material being cut. Reduces muscle stress, latch keeps blades safely closed when snip is not in use
• Longest lasting cutting edge - blades are hot drop forged of molybdenum alloy steel and austemper heat treated
• Strongest blades - hot drop forged process uses grain structure of steel to produce maximum strength
• Optimum serrations - blades serrated 40 serrations per" grip material without scarring
• Highest quality components - grade 8 blade pivot bolt and heavy-duty double-overwind spring are unconditionally guaranteed
• Compound leverage multiplies handle force to cutting blades by 8 : 1 power ratio
• Strongest handles - high tensile strength steel will not bend from hand pressure and provides most efficient conversion of hand force to cutting power
• Comfortable handle grips - thick textured Santoprene grips comfort user's hand and prevent steel handles from wearing through
• Use in either hand
  
  

  P6510-S

Midwest P6510R Right Cut Offset Aviation Snip, 18/22 ga Cold Rolled Steel/Stainless Steel, 9-3/4" Overall Length

Offset models in 3-blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut
• Cuts tighter curves than regular aviation snips
• Easiest used in right hand
• Bottom blade serrated
• Long blade life, precision-formed blades for aviation and bulldog snips
• Ultimate spring durability, reinforced chrome silicone valve-quality wire lasts for a lifetime
• Quick identification - color coding on both blades and handles plus arrow icons allow
  
  

  Midwest P6510-R

Midwest P6510L Left Cut Offset Aviation Snip, 18/22 ga Cold Rolled Steel/Stainless Steel, 9-3/4" Overall Length

Offset models in 3-blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut
• Cuts tighter curves than regular aviation snips
• Easiest used in right hand
• Bottom blade serrated
• Long blade life, precision-formed blades for aviation and bulldog snips
• Ultimate spring durability, reinforced chrome silicone valve-quality wire lasts for a lifetime
• Quick identification - color coding on both blades and handles plus arrow icons allow
  
  

  Midwest P6510-L

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job
  
  

  S6R

The time-saving Turboshear model number TS1 inserts directly into the chuck of a standard 1200 RPM A/C or cordless drill. Its that easy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) Galvanized steel. Blind cuts require only a 1/2" starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable. For premium performance without the premium price of a dedicated power shear, Turboshear is an easy addition to every tool bag.

Inserts into chuck of A/C or cordless drill
• Offset design saves hands
• Navigates tight patterns and square cuts
• Cuts a variety of building materials
• Cut-away view
• Tsdc drill clamp (optional)
• Made in the U.S.A.
  
  

  Malco TS1

Built-in wire cutter lets you finish the job you started with just one tool! double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. comfortable, non-slip vinyl gripped handles.

Built-in wire cutter
• Double edged blade
• Cuts from either direction
• Fine honed blade
• 10.4 to 1 - 11.9 to 1 wire cutter variable leverage ratio (high/low) throughout stroke
  
  

  Malco T671-2

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job
  
  

  Malco T646-1

Malco 12F Folding Tool, 22 ga Sheet Metal, 12" L

Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment
  
  

  Malco T646-3

Malco DS1 Anodized Aluminum Duct Stretcher, 16" Overall Length

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole
  
  

  Malco T646-5