Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC6024TSA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

First Company USM330AV

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC3621THA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC4821TMA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC2417THA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC4824THA

Standard Features

Limited Warranty*

Multi-tap ECM (electronic commutating motor) motors - all sizes

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Cabinet construction features innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.

Installation-Flexible, multipoise units

Horizontal hanging provisions on cabinet

No tools required to access filter

Newly improved filter rack area filter door insulation added for improved air seal

3- through 30-kW accessory heaters - field installed

Factory-supplied power plug

Easy plug-in provisions for heater installation

Entry options for high and low voltage wiring hook-up

Leak-preventing sweat connections

Thermostatic expansion valve, TXV, on all sizes

Designed for manufactured housing applications

International Comfort Products FJMA4B48L0CB

Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 42K BTU
• 3-1/2 Ton
• 115/1 VAC
• 21" Wide
• PSC Motor
• Multi-Position,
  ,
  
  
  
  

  Fujitsu FH3621TPSJSN

Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 42K BTU 3-1/2 Ton
• 208/230/1 VA
• 21" Wide
• PSC Motor
• Multi-Position,
  
  
  
  

  Fujitsu FH4221TPSASN

FEATURES

Environmentally Balanced Refrigerant Technology

R-410A, chlorine-free, non-ozone depleting refrigerant

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant

Energy Efficient Operation

Variable Speed Constant Airflow ECM (Electronically Commutating Motor) operates efficiently at all speeds

Maximizes efficiency of heating and cooling systems

Ultra low power consumption during fan only operation
Indoor Weather Control

Warm, comfortable heating air temperatures

Unmatched humidity control, especially with thermostat with relative humidity controls

Airflow and Sound Technology

Diffuser air discharge section for high airflow efficiency and quiet, smooth operation

High duct static capability

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Condensate Control and Disposal Technology

Minimal standing waterless microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage

Condensate fittings relocated away from turbulent airflow patterns at the blower entrance for improved condensate control performance

Overflow feature for slope coil units allows condensate to exit the unit without damage to product under clogged primary and secondary line conditions

Tested for condensate disposal at conditions much more severe than those required by AHRI

Primary and secondary drain connections to comply with HUD

All pans constructed of an injection molded glass-filled polycarbonate
engineered resin material, with brass drain connections.

High density, super thick cabinetry insulation with vapor barrier

International Comfort Products FMU4Z1800AL

FEATURES

Environmentally Balanced Refrigerant Technology

R-410A, chlorine-free, non-ozone depleting refrigerant

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant

Energy Efficient Operation

Variable Speed Constant Airflow ECM (Electronically Commutating Motor) operates efficiently at all speeds

Maximizes efficiency of heating and cooling systems

Ultra low power consumption during fan only operation
Indoor Weather Control

Warm, comfortable heating air temperatures

Unmatched humidity control, especially with thermostat with relative humidity controls

Airflow and Sound Technology

Diffuser air discharge section for high airflow efficiency and quiet, smooth operation

High duct static capability

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Condensate Control and Disposal Technology

Minimal standing waterless microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage

Condensate fittings relocated away from turbulent airflow patterns at the blower entrance for improved condensate control performance

Overflow feature for slope coil units allows condensate to exit the unit without damage to product under clogged primary and secondary line conditions

Tested for condensate disposal at conditions much more severe than those required by AHRI

Primary and secondary drain connections to comply with HUD

All pans constructed of an injection molded glass-filled polycarbonate
engineered resin material, with brass drain connections.

High density, super thick cabinetry insulation with vapor barrier

International Comfort Products FTMA4B48L0CA