S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Features
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
Two-stage operation
Provides flexibility in application with single and two-stage outdoor equipment.
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating.
Nine speed standard ECM blower motor
Provides increased system compatibility.
Electric heat kit 8HK field-installed series available for easy installation and service application
Designed for easy installation and service
A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight
applications. Front facing components, slide out blower, laser cut knock outs and integrated duct
flanges shorten install time.
Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard
193.
Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.
A2L refrigerant ready
An R-454B refrigerant detection system (RDS) is factory installed.
York JHE36C5CD2SS1
Item#:
JHE48D5CG2SS1
Manufacturer Item:
JHE48D5CG2SS1
Manufacturer:
JC RESIDENTIAL AND LIGHT COMME
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
36HCXW2010AVB00AAF
Item#:
36HCXW2010AVB00AAF
Manufacturer Item:
6036W2010AVB00AAF
Manufacturer:
FIRST CO.
STANDARD FEATURES:
Rifled aluminum tubing, enhanced aluminum fins.
Downflow plates and manufactured housing drain hose and drain elbow
included.
Multi-stage leak testing at 500 psi pressure decay, mass spectrometer tested
with Helium, then Nitrogen pressurized and factory sealed for optimal system
integrity and long-term reliability.
Left-hand refrigerant/plumbing connections, with downturn suction line for
easy installation in manufactured housing applications. Schrader provided
for pressure assurance testing
Aspen DM36A3J-177L-601
Item#:
DM36E34-177L-000
Manufacturer Item:
DM36E34-177L-441
Manufacturer:
ASPEN MFG. LLC
STANDARD FEATURES:
Rifled aluminum tubing, enhanced aluminum fins.
Downflow plates and manufactured housing drain hose and drain elbow
included.
Multi-stage leak testing at 500 psi pressure decay, mass spectrometer tested
with Helium, then Nitrogen pressurized and factory sealed for optimal system
integrity and long-term reliability.
Left-hand refrigerant/plumbing connections, with downturn suction line for
easy installation in manufactured housing applications. Schrader provided
for pressure assurance testing
Aspen CE60A3N-245L-135
Item#:
DM24A34-177L-000
Manufacturer Item:
DM24A34-177L-441
Manufacturer:
ASPEN MFG. LLC
STANDARD FEATURES:
Rifled aluminum tubing, enhanced aluminum fins.
Downflow plates and manufactured housing drain hose and drain elbow
included.
Multi-stage leak testing at 500 psi pressure decay, mass spectrometer tested
with Helium, then Nitrogen pressurized and factory sealed for optimal system
integrity and long-term reliability.
Left-hand refrigerant/plumbing connections, with downturn suction line for
easy installation in manufactured housing applications. Schrader provided
for pressure assurance testing
Aspen DM48E3J-177L-601
Item#:
DM59A44-177L-000
Manufacturer Item:
DM59A44-177L-441
Manufacturer:
ASPEN MFG. LLC
Features:
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Fujitsu Unitary FCC3621TSA
Features:
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Fujitsu Unitary FCC4824TSA
Bosch BMAC4860DBTA
Item#:
BMAC4860DNTF
Manufacturer Item:
8733947957
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
FCCN4824MZTA
Item#:
FCCN4824MZTA
Manufacturer Item:
FCCN4824MZTA
Manufacturer:
FUJITSU(UNITARY)
Constructed of aluminum fins bonded to internally grooved aluminum tubingCoils are tested at the factory with an extensive refrigerant leak check Coils have copper sweat refrigerant connections Feature two sets of 3/4" NPT Condensate drain connections for ease of connection Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only) Approved for system application with variety of Fujitsu outdoor units Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material Compatible with germicidal light system (UV resistant) Bi-directional airflow eliminates the need to switch any internal components from horizontal left to right Unique drain pan design maximizes application flexibility and condensate removal N-Coil design maximizes performance and minimizes height required at installation Coils are AHRI certified for system application with a variety of Fujitsu outdoor units TEV metering device
Fujitsu Unitary FCC2414TSA
Features:
Pitched polymer drain pan
Left Hand Refrigerant and drain connections
Flexible tube drain connection (Some Models)
Exterior mounted metering device
Factory or field installed TXV
Coil elevated from condensate
Long Life Aluminum or Rifled Copper tube
Aluminum fins and end plates
Pressure tested to 500 PSI
Quick-Connect fittings are optional
(AERO-QUIP #6 & #11) ** Add QC to Model number
3/ 8 Liquid Line connection
3/ 4 or 7/ 8 Suction Line Connections
Allstyle Coil ASUC36-A264G-6
Item#:
ASUC24-M226G-7+V
Manufacturer Item:
ASUC24-M226G-7+V
Manufacturer:
ALLSTYLE COIL COMPANY, L.P.
Advanced Distributor Products (ADP) started with a vision to produce the best evaporator coils in the
country. In 1992, ADP began production in Grenada, Mississippi, and started developing innovative
products that are fully supported by a research and development laboratory, which includes areas for
testing, assembling, and designing future products.
Today, ADP offers a wide range of premier HVAC products with exclusive design advantages. We pride ourselves on our quality, flexibility, and solutions. We design our products to fit any application and simplify installation. And were always open to new partnerships with businesses and the communities we serve.
Leading US manufacturer of evaporator coils and air handlers
Built to the highest quality standards
Microban antimicrobial technology
Advanced performance testing simulation software
Broadest product line in the industry thousands of variations available Products designed to matchx
perfectly with any system
Personalized programs for distributor partners
Custom product strategies to meet local needs
Short lead times
Low warranty rates with simple claim process
Insights from industry experts
Focused on distributor and dealer success
Quick and easy installation in the field
Today, ADP offers a wide range of premier HVAC products with exclusive design advantages. We pride ourselves on our quality, flexibility, and solutions. We design our products to fit any application and simplify installation. And were always open to new partnerships with businesses and the communities we serve.
Advance Distributers HE33136A140A000467
Item#:
HH58636A225
Manufacturer Item:
HH58636A225
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
