Russell manufactures a complete line of commercial refrigeration equipment and Solutionsenergy-efficient unit coolers, condensing units, condensers, air handlers, coils and packaged systemsto match any refrigeration requirement. Part of the Rheem family of brands.

Russell RL6A041ADA

Russell manufactures a complete line of commercial refrigeration equipment and Solutionsenergy-efficient unit coolers, condensing units, condensers, air handlers, coils and packaged systemsto match any refrigeration requirement. Part of the Rheem family of brands.

Russell RL6E162DDA

0068-2008 Parker TXV Orifice T2/TE2 Valve Order Spare 068-0003

0068-2008

Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 48K BTU 4 Ton
• 208/230/1 VAC
• 21" Wide
• Multi-Position
  
  
  

  Fujitsu FH4821TTSJSN

Advance Distributers BCRMB6136-S01 Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 48000BTU, 4 Ton, 20 kw, 115 VAC

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening

,
,

Advance Distributers BCRMB6136-S03

Features:

Pitched polymer drain pan

Left Hand Refrigerant and drain connections

Flexible tube drain connection (Some Models)

Exterior mounted metering device

Factory or field installed TXV

Coil elevated from condensate

Long Life Aluminum or Rifled Copper tube

Aluminum fins and end plates

Pressure tested to 500 PSI

Quick-Connect fittings are optional

(AERO-QUIP #6 & #11) ** Add QC to Model number

3/ 8 Liquid Line connection

3/ 4 or 7/ 8 Suction Line Connections

Advance Distributers RE24936C145B2005AP

Features:

Pitched polymer drain pan

Left Hand Refrigerant and drain connections

Flexible tube drain connection (Some Models)

Exterior mounted metering device

Factory or field installed TXV

Coil elevated from condensate

Long Life Aluminum or Rifled Copper tube

Aluminum fins and end plates

Pressure tested to 500 PSI

Quick-Connect fittings are optional

(AERO-QUIP #6 & #11) ** Add QC to Model number

3/ 8 Liquid Line connection

3/ 4 or 7/ 8 Suction Line Connections

Allstyle Coil ASUC24-A244G-5

Features:

Pitched polymer drain pan

Left Hand Refrigerant and drain connections

Flexible tube drain connection (Some Models)

Exterior mounted metering device

Factory or field installed TXV

Coil elevated from condensate

Long Life Aluminum or Rifled Copper tube

Aluminum fins and end plates

Pressure tested to 500 PSI

Quick-Connect fittings are optional

(AERO-QUIP #6 & #11) ** Add QC to Model number

3/ 8 Liquid Line connection

3/ 4 or 7/ 8 Suction Line Connections

Allstyle Coil ASUC48-M2476G-VP4-8

Features:

Pitched polymer drain pan

Left Hand Refrigerant and drain connections

Flexible tube drain connection (Some Models)

Exterior mounted metering device

Factory or field installed TXV

Coil elevated from condensate

Long Life Aluminum or Rifled Copper tube

Aluminum fins and end plates

Pressure tested to 500 PSI

Quick-Connect fittings are optional

(AERO-QUIP #6 & #11) ** Add QC to Model number

3/ 8 Liquid Line connection

3/ 4 or 7/ 8 Suction Line Connections

Allstyle Coil ASUC36-M2276G-VP4-7

Features:

Pitched polymer drain pan

Left Hand Refrigerant and drain connections

Flexible tube drain connection (Some Models)

Exterior mounted metering device

Factory or field installed TXV

Coil elevated from condensate

Long Life Aluminum or Rifled Copper tube

Aluminum fins and end plates

Pressure tested to 500 PSI

Quick-Connect fittings are optional

(AERO-QUIP #6 & #11) ** Add QC to Model number

3/ 8 Liquid Line connection

3/ 4 or 7/ 8 Suction Line Connections

Aeroflex REF562-AC3810WG

Features:

Pitched polymer drain pan

Left Hand Refrigerant and drain connections

Flexible tube drain connection (Some Models)

Exterior mounted metering device

Factory or field installed TXV

Coil elevated from condensate

Long Life Aluminum or Rifled Copper tube

Aluminum fins and end plates

Pressure tested to 500 PSI

Quick-Connect fittings are optional

(AERO-QUIP #6 & #11) ** Add QC to Model number

3/ 8 Liquid Line connection

3/ 4 or 7/ 8 Suction Line Connections

Allstyle Coil ASUC30-A246G-6

Advance Distributers BCRMB6136-S03 Pre-Painted Galvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 36000 BTU, 3 Ton, 20 kw, 120 VAC

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening

,
,

Advance Distributers BCRMB6136-S01