|◀ ◀ 13 - 24 of 437 ▶ ▶|
View:

Air Handler Multi-Position 2-1/2 Ton 30K BTU 208/230/1 ECM Motor TXV R410A 49-5/8" H x 17-5/8" L x 22" D

Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-Flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications


    International Comfort Products FJMA4X24L0BC

    • Item#:
    FJMA4X30L0BB
    Manufacturer Item:
    FJMA4X30L0BB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X30L0BB_Spec

    Air Handler Multi-Position 2 Ton 24K BTU ECM Motor TXV 208/230/1 R410A 49-5/8" H x 17-5/8" L x 22" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-Flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications


    International Comfort Products FJMA4X18L0AB

    • Item#:
    FJMA4X24L0BC
    Manufacturer Item:
    FJMA4X24L0BC
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X24L0BC_Spec

    Air Handler Multi-Position 1-1/2 Ton 18K BTU ECM Motor TXV 208/230/1 R410A 42-11/16" H x 14-15/16" L x 22" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-Flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications

    International Comfort Products FJMA4B60L0DB

    • Item#:
    FJMA4X18L0AB
    Manufacturer Item:
    FJMA4X18L0AB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X18L0AB_Spec

    Package Roof Top Unit Gas 5 Ton 60K BTU 14 SEER 208/230/3 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV060HEFA0AAA

    • Item#:
    RGV060HEFA0AAA
    Manufacturer Item:
    RGV060HEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Handler Horizontal 1-1/2 Ton 18K BTU 208/230 TXV R410A 10-1/4" H x 49--1/4" W x 26-3/8" D

    HORIZONTAL FAN COILS
  • FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons
  • FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons
  • Horizontal application only
  • Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230v160 transformer
  • All Models use R410A TXV metering device
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PERFORMANCE
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • EASY TO INSTALL AND SERVICE
  • Acoil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furreddown ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position



    International Comfort Products FMU4X2400AL

    • Item#:
    FMU4Z1800AL
    Manufacturer Item:
    FMU4Z1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install

    Package Roof Top Unit Gas 4 Ton 48K BTU 14 SEER 208/230/1 Hi Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV049KEFA0AAA

    • Item#:
    RGV049KFFA0AAA
    Manufacturer Item:
    RGV049KFFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Handler Horizontal 2 Ton 24K BTU 208/230 TXV R410A 10-1/4" H x 37-1/4" W x 26-3/8" D

    HORIZONTAL FAN COILS
  • FMU4X and FMC4X 1-1/2, 2 and 2.5 Tons
  • ALL MODELS
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW
  • 40 VA 208/230v-1-60 transformer
  • FMU4X & FMC4X use R-410A TXV metering device
  • R-22 capable with accessory R-22 TXV
  • FMC4X & FMC4P
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 2% cabinet leakage rate at 1" w.c. of static pressure
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be runout the back or side of casing
  • PERFORMANCE
  • PSC motor on all models
  • EASY TO INSTALL AND SERVICE
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved copper tube / aluminum fin coils



    International Comfort Products FMC5Z3600AL

    • Item#:
    FMU4X2400AL
    Manufacturer Item:
    FMUX2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install
    FMU4X2400AL_Spec

    Package Roof Top Unit Gas 4 Ton 48K BTU 14 SEER 208/230/1 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV048LEFA0AAA

    • Item#:
    RGV049KEFA0AAA
    Manufacturer Item:
    RGV049KEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Handler 2.5 Ton 30K BTU Horizontal ECM Motor TXV R410A 10-1/4" H x 49-1/4" W x 26-3/8" D

    Features
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230-1-60 supply voltage
  • All Models use R-410A TXV metering device
  • All Aluminum coils
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • Easy to Install and Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibilty Primary and secondary drain connections exit from the back or side of the cabinet.
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X &
  • FMC4X models with "AL" in the 10th and 11th position of model number

    International Comfort Products FMC4Z2400AL

    • Item#:
    FMC4Z3000AL
    Manufacturer Item:
    FMC4Z3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install

    Package Roof Top Unit Gas 4 Ton 48K BTU 14 SEER 460/3 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV048KFFA0AAA

    • Item#:
    RGV048LEFA0AAA
    Manufacturer Item:
    RGV048LEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Handler 2 Ton 24K BTU Horizontal ECM Motor TXV R410A 10-1/4" H x 49--1/4" W x 26-3/8" D

    Features
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230-1-60 supply voltage
  • All Models use R-410A TXV metering device
  • All Aluminum coils
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • Easy to Install and Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibilty Primary and secondary drain connections exit from the back or side of the cabinet.
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X &
  • FMC4X models with "AL" in the 10th and 11th position of model number



    International Comfort Products FMC4Z1800AL

    • Item#:
    FMC4Z2400AL
    Manufacturer Item:
    FMC4Z2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install

    Package Roof Top Unit Gas 4 Ton 48K BTU 14 SEER 208/230/1 Hi Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV037KEFA0AAA

    • Item#:
    RGV048KFFA0AAA
    Manufacturer Item:
    RGV048KFFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    |◀ ◀ 13 - 24 of 437 ▶ ▶|
    View: