S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
l
INTERNATIONAL COMFORT PRODUCTS G80CTL0702120A
Item#:
G80CTL0702120A
Manufacturer Item:
G80CTL0702120A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES:
Up to 96% AFUE in upflow and horizontal positions
95% AFUE in downflow position
All models earn the ENERGY STAR®
Two-stage heating operation
Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
Supports single- and two-stage cooling units
Dehumidification feature in cooling
Low NOx units are designed for California installations and meet
40 ng/J NOx emissions. Can be installed in air quality management
districts with a 40 ng/J NOx emissions requirement.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and
cabinet air leakage less than 1.4% at 0.5 in. W.C.
when tested in accordance with ASHRAE standard 193
TOUGHER
Flame roll-out sensors standard
Adjustable heating blower OFF delay
Factory set blower ON delay
RPJ primary heat exchanger
Stainless steel secondary heat exchanger
High temperature limit control prevents overheating
Direct ignition with Silicon Nitride ignitor
QUIETER
Operates at quieter, lower heating rates
Two-speed induced draft combustion motor
Variable speed, constant torque ECM blower motor
Fully insulated steel cabinet
EASIER TO INSTALL AND SERVICE
Direct vent (2-pipe), single-pipe venting or ventilated combustion air
24 VAC humidifier terminal and electronic air cleaner terminal
35 (889mm) high, for ease of installation
Quarter turn knobs for easy door removal and secure attachment
conversion kits available
Four position upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or
horizontal applications with accessory (order separately)
Concentric vent available
Slide out heat exchanger assembly and blower assembly
International Comfort Products G96VTN0802120B
Item#:
G96VTN1002120B
Manufacturer Item:
G96VTN1002120B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products G96VTN1202422B
Item#:
G97CMN0601714A
Manufacturer Item:
G97CMN0601714A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES:
Up to 96% AFUE in upflow and horizontal positions
95% AFUE in downflow position
All models earn the ENERGY STAR®
Two-stage heating operation
Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
Supports single- and two-stage cooling units
Dehumidification feature in cooling
Low NOx units are designed for California installations and meet
40 ng/J NOx emissions. Can be installed in air quality management
districts with a 40 ng/J NOx emissions requirement.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and
cabinet air leakage less than 1.4% at 0.5 in. W.C.
when tested in accordance with ASHRAE standard 193
TOUGHER
Flame roll-out sensors standard
Adjustable heating blower OFF delay
Factory set blower ON delay
RPJ primary heat exchanger
Stainless steel secondary heat exchanger
High temperature limit control prevents overheating
Direct ignition with Silicon Nitride ignitor
QUIETER
Operates at quieter, lower heating rates
Two-speed induced draft combustion motor
Variable speed, constant torque ECM blower motor
Fully insulated steel cabinet
EASIER TO INSTALL AND SERVICE
Direct vent (2-pipe), single-pipe venting or ventilated combustion air
24 VAC humidifier terminal and electronic air cleaner terminal
35 (889mm) high, for ease of installation
Quarter turn knobs for easy door removal and secure attachment
conversion kits available
Four position upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or
horizontal applications with accessory (order separately)
Concentric vent available
Slide out heat exchanger assembly and blower assembly
International Comfort Products G96VTN0601412B
Item#:
G96VTN0601716B
Manufacturer Item:
G96VTN0601716B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products F97CMN1202422B
Item#:
G96CTN0601714B
Manufacturer Item:
G96CTN0601714B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES:
Up to 96% AFUE in upflow and horizontal positions
95% AFUE in downflow position
All models earn the ENERGY STAR®
Two-stage heating operation
Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
Supports single- and two-stage cooling units
Dehumidification feature in cooling
Low NOx units are designed for California installations and meet
40 ng/J NOx emissions. Can be installed in air quality management
districts with a 40 ng/J NOx emissions requirement.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and
cabinet air leakage less than 1.4% at 0.5 in. W.C.
when tested in accordance with ASHRAE standard 193
TOUGHER
Flame roll-out sensors standard
Adjustable heating blower OFF delay
Factory set blower ON delay
RPJ primary heat exchanger
Stainless steel secondary heat exchanger
High temperature limit control prevents overheating
Direct ignition with Silicon Nitride ignitor
QUIETER
Operates at quieter, lower heating rates
Two-speed induced draft combustion motor
Variable speed, constant torque ECM blower motor
Fully insulated steel cabinet
EASIER TO INSTALL AND SERVICE
Direct vent (2-pipe), single-pipe venting or ventilated combustion air
24 VAC humidifier terminal and electronic air cleaner terminal
35 (889mm) high, for ease of installation
Quarter turn knobs for easy door removal and secure attachment
conversion kits available
Four position upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or
horizontal applications with accessory (order separately)
Concentric vent available
Slide out heat exchanger assembly and blower assembly
International Comfort Products G96VTN0401410B
Item#:
G96VTN0401712B
Manufacturer Item:
G96VTN0401712B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES:
Up to 96% AFUE in upflow and horizontal positions
95% AFUE in downflow position
All models earn the ENERGY STAR®
Two-stage heating operation
Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
Supports single- and two-stage cooling units
Dehumidification feature in cooling
Low NOx units are designed for California installations and meet
40 ng/J NOx emissions. Can be installed in air quality management
districts with a 40 ng/J NOx emissions requirement.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and
cabinet air leakage less than 1.4% at 0.5 in. W.C.
when tested in accordance with ASHRAE standard 193
TOUGHER
Flame roll-out sensors standard
Adjustable heating blower OFF delay
Factory set blower ON delay
RPJ primary heat exchanger
Stainless steel secondary heat exchanger
High temperature limit control prevents overheating
Direct ignition with Silicon Nitride ignitor
QUIETER
Operates at quieter, lower heating rates
Two-speed induced draft combustion motor
Variable speed, constant torque ECM blower motor
Fully insulated steel cabinet
EASIER TO INSTALL AND SERVICE
Direct vent (2-pipe), single-pipe venting or ventilated combustion air
24 VAC humidifier terminal and electronic air cleaner terminal
35 (889mm) high, for ease of installation
Quarter turn knobs for easy door removal and secure attachment
conversion kits available
Four position upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or
horizontal applications with accessory (order separately)
Concentric vent available
Slide out heat exchanger assembly and blower assembly
International Comfort Products G96VTN0401712B
Item#:
G96VTN0601412B
Manufacturer Item:
G96VTN0601412B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products G96CTN0601714B
Item#:
G96CTN0801714B
Manufacturer Item:
G96CTN0801714B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
l
quality management districts with a 40 ng/J NOx emissions requirement
International Comfort Products G80VTL0902120B
Item#:
G80VTL0902120B
Manufacturer Item:
G80VTL0902120B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES and BENEFITS
Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
Reliable Burner: With uniform flame pattern extends life of heat exchanger.
Nortek Global (Intertherm) MG1E077F1AAM2
Item#:
MG1E077F1AAM2
Manufacturer Item:
1036481
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Rheem PROG40-30NRH62MHDV Water Heater Atmospheric Vent Residential Short 40 Gallons 30000 BTU
Rheem Water Heaters PROG30S-30NRH63
Item#:
PROG40-30NRH62MHDV
Manufacturer Item:
PROG40-30N RH62 MHDV
Manufacturer:
RHEEM SALES COMP(WATER HEATER)
Bradford White RG250H6N Lead Free Atmospheric Vent Residential Natural Gas Water Heater, 50 Gallon,
- Intelligent gas control with proven millivolt powered technology and built-in piezo igniter
- Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
- Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
- Temperature and pressure relief valve installed
- Durable tamper proof design low restriction brass drain valve
- Protective magnesium anode rod
- Factory installed heat traps
- Factory installed hydrojet total performance system
- Advanced screenlok technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
- Flashing green LED provides positive indication that pilot is on
- High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Pedestal base
- No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
- 6 years limited tank and component parts warranty
- 3 x 4""snap lock" draft diverter
- Less than 40 ng/J NOx emissions
- Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
Bradford White Water Heaters RG240T6X
Item#:
RG250H6N
Manufacturer Item:
RG250H6N
Manufacturer:
BRADFORD WHITE CORPORATION