Bradford White RG1PV40S6N19 Hot Water Heater 40Gallon 40K BTU (6 Year) Power Vented,

Bradford White Water Heaters BRG250T6N

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty
  

  thermo pride clqs1-100t48n

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty
  

  Thermo Pride CMA4-50D36N

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty
  

  thermo pride gmd2-80n

FEATURES:

Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position

All models earn the ENERGY STAR®

Two-stage heating operation

Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment

Supports single- and two-stage cooling units

Dehumidification feature in cooling

Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER

Flame roll-out sensors standard

Adjustable heating blower OFF delay

Factory set blower ON delay

RPJ primary heat exchanger

Stainless steel secondary heat exchanger

High temperature limit control prevents overheating

Direct ignition with Silicon Nitride ignitor QUIETER

Operates at quieter, lower heating rates

Two-speed induced draft combustion motor

Variable speed, constant torque ECM blower motor

Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE

Direct vent (2-pipe), single-pipe venting or ventilated combustion air

24 VAC humidifier terminal and electronic air cleaner terminal

35 (889mm) high, for ease of installation

Quarter turn knobs for easy door removal and secure attachment conversion kits available

Four position upflow/downflow/horizontal (left/right) installation

At least twelve different venting configurations

Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)

Concentric vent available

Slide out heat exchanger assembly and blower assembly

International Comfort Products G96VTN1002120B

FEATURES:

Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position

All models earn the ENERGY STAR®

Two-stage heating operation

Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment

Supports single- and two-stage cooling units

Dehumidification feature in cooling

Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER

Flame roll-out sensors standard

Adjustable heating blower OFF delay

Factory set blower ON delay

RPJ primary heat exchanger

Stainless steel secondary heat exchanger

High temperature limit control prevents overheating

Direct ignition with Silicon Nitride ignitor QUIETER

Operates at quieter, lower heating rates

Two-speed induced draft combustion motor

Variable speed, constant torque ECM blower motor

Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE

Direct vent (2-pipe), single-pipe venting or ventilated combustion air

24 VAC humidifier terminal and electronic air cleaner terminal

35 (889mm) high, for ease of installation

Quarter turn knobs for easy door removal and secure attachment conversion kits available

Four position upflow/downflow/horizontal (left/right) installation

At least twelve different venting configurations

Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)

Concentric vent available

Slide out heat exchanger assembly and blower assembly

International Comfort Products G96VTN1202422A

FEATURES:

Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position

All models earn the ENERGY STAR®

Two-stage heating operation

Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment

Supports single- and two-stage cooling units

Dehumidification feature in cooling

Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER

Flame roll-out sensors standard

Adjustable heating blower OFF delay

Factory set blower ON delay

RPJ primary heat exchanger

Stainless steel secondary heat exchanger

High temperature limit control prevents overheating

Direct ignition with Silicon Nitride ignitor QUIETER

Operates at quieter, lower heating rates

Two-speed induced draft combustion motor

Variable speed, constant torque ECM blower motor

Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE

Direct vent (2-pipe), single-pipe venting or ventilated combustion air

24 VAC humidifier terminal and electronic air cleaner terminal

35 (889mm) high, for ease of installation

Quarter turn knobs for easy door removal and secure attachment conversion kits available

Four position upflow/downflow/horizontal (left/right) installation

At least twelve different venting configurations

Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)

Concentric vent available

Slide out heat exchanger assembly and blower assembly

International Comfort Products G80VTL0701716B

FEATURES:

Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position

All models earn the ENERGY STAR®

Two-stage heating operation

Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment

Supports single- and two-stage cooling units

Dehumidification feature in cooling

Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER

Flame roll-out sensors standard

Adjustable heating blower OFF delay

Factory set blower ON delay

RPJ primary heat exchanger

Stainless steel secondary heat exchanger

High temperature limit control prevents overheating

Direct ignition with Silicon Nitride ignitor QUIETER

Operates at quieter, lower heating rates

Two-speed induced draft combustion motor

Variable speed, constant torque ECM blower motor

Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE

Direct vent (2-pipe), single-pipe venting or ventilated combustion air

24 VAC humidifier terminal and electronic air cleaner terminal

35 (889mm) high, for ease of installation

Quarter turn knobs for easy door removal and secure attachment conversion kits available

Four position upflow/downflow/horizontal (left/right) installation

At least twelve different venting configurations

Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)

Concentric vent available

Slide out heat exchanger assembly and blower assembly

International Comfort Products G96VTN0601716B

FEATURES:

Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position

All models earn the ENERGY STAR®

Two-stage heating operation

Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment

Supports single- and two-stage cooling units

Dehumidification feature in cooling

Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER

Flame roll-out sensors standard

Adjustable heating blower OFF delay

Factory set blower ON delay

RPJ primary heat exchanger

Stainless steel secondary heat exchanger

High temperature limit control prevents overheating

Direct ignition with Silicon Nitride ignitor QUIETER

Operates at quieter, lower heating rates

Two-speed induced draft combustion motor

Variable speed, constant torque ECM blower motor

Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE

Direct vent (2-pipe), single-pipe venting or ventilated combustion air

24 VAC humidifier terminal and electronic air cleaner terminal

35 (889mm) high, for ease of installation

Quarter turn knobs for easy door removal and secure attachment conversion kits available

Four position upflow/downflow/horizontal (left/right) installation

At least twelve different venting configurations

Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)

Concentric vent available

Slide out heat exchanger assembly and blower assembly

International Comfort Products G96VTN0801716B