|◀ ◀ 229 - 240 of 255 ▶ ▶|
View:

Package Gas/Electric 4 Ton 48K BTU Cooling 130K BTU Heating 208/230/1 R410A 52-3/4 x 48-3/16 x 44-1/8

  • Efficient single-stage scroll compressor
  • Efficient multi-speed ECM blower motor
  • Single-stage gas valve
  • Corrosion-resistant Stainless Steel heat exchanger
  • Reliable, direct spark gas ignition
  • System protecting high and low-pressure switches
  • Dense wire hail guard grille and raised coil design for protection against weather and debris
  • Corrosion-resistant aluminum coil design
  • Sound reducing features: vibration-reducing top panel, soft mounted compressor and blower motor
  • Compatible thermostat: heat/cool with humidity sensing
  • Rooftop or ground level installation
  • Cooling capacity: 25 tons
  • Heating capacity: 40,000130,000 BTU


    • Item#:
    PGD448130K000K
    Manufacturer Item:
    PGD448130K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PGD4-ICP-Warranty_Misc
    PGD4-ICP_Install
    PGD4-ICP_Spec

    Package Heat Pump Unit 3.5 Ton 42K BTU 14 SEER 230/1 R410A Convertible

  • REFRIGERATION CIRCUIT
  • Environmentally balanced R- 410A refrigerant
  • Copper tube/aluminum fin condenser and evaporator coils
  • Scroll compressor standard on all models
  • Short- cycling protection for the compressor is built into the defrost control board
  • Dehumidification mode (airflow reduction) on all models
  • EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy three- panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination electric heating and cooling
    International Comfort Products PHD442000K000K

    International Comfort Products PHD442000K000K

    • Item#:
    PHD442000K000K
    Manufacturer Item:
    PHD442000K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PHD4-ICP-Service_Misc
    PHD4-ICP_Install
    PHD4-ICP_Spec

    Package Heat Pump Unit 5 Ton 60K BTU 14 SEER 230/1 VAC

  • REFRIGERATION CIRCUIT
  • Environmentally balanced R- 410A refrigerant
  • Copper tube/aluminum fin condenser and evaporator coils
  • Scroll compressor standard on all models
  • Short- cycling protection for the compressor is built into the defrost control board
  • Dehumidification mode (airflow reduction) on all models
  • EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy three- panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination electric heating and cooling

    INTERNATIONAL COMFORT PRODUCTS PHD460000H000K

    • Item#:
    PHD460000H000K
    Manufacturer Item:
    PHD460000H000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PHD4-ICP-Service_Misc
    PHD4-ICP_Install
    PHD4-ICP_Spec

    Package Roof Top Unit Gas 20 Ton 230/3 High Heat

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV240HF2A0AAA

    • Item#:
    RGV240HF2A0AAA
    Manufacturer Item:
    RGV240HF2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Conditioning Condensing Unit Performance Series 5 Ton

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm)
  • spacing or with 3/8 (10mm) spacing for extra protection
    LIMITED WARRANTY*
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
  • limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for
    • Item#:
    R4A460GK
    Manufacturer Item:
    R4A460GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 3.5 Ton

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A442GK
    Manufacturer Item:
    R4A442GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 4 Ton

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm)
  • spacing or with 3/8 (10mm) spacing for extra protection
    LIMITED WARRANTY*
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
  • limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for
    • Item#:
    R4A348GK
    Manufacturer Item:
    R4A348GKH
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 3 Ton

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) spacing for extra protection

    R4A336GK

    • Item#:
    R4A336GK
    Manufacturer Item:
    R4A336GKH
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    ICP Heat Pump Condensing Unit Enhanced Fan Guard 1.5 Ton


    • Scroll compressors on all models
    • Suction line accumulator factory installed
    • Integrated solid state control with TimeTemperature Defrost
    • High and Low pressure switches
    • Copper tube / aluminum fin coil
    • Easy Access service valves on all models
    • External high and low refrigerant service ports
    • Only two screws to access control panel
    • Factory charged with R410A refrigerant
    • Painted cabinet finish over Gallonvanized steel
    • Coated inlet grille with 3/8 spacing standard (hail guard)
    • 5 year compressor limited warranty Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
    • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limited warranty (including compressor and coil) * For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications
    Item#:
    R4H418GKP
    Manufacturer Item:
    R4H418GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4H4-ICP-Wiring_Misc
    R4H4-ICP_Install
    R4H4-ICP_Spec

    95% Multi-Position Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement



    R95ESN1002120A


    R95ESN1002120A

    • Item#:
    R95ESN1002120A
    Manufacturer Item:
    R95ESN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R95ESN1002120A_Spec

    Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet



    R92ESN0401410A


    R92ESN0401410A

    • Item#:
    R92ESN0401410A
    Manufacturer Item:
    R92ESN0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec

    Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet



    R92ESN0801716A


    R92ESN0801716A

    • Item#:
    R92ESN0801716A
    Manufacturer Item:
    R92ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec
    |◀ ◀ 229 - 240 of 255 ▶ ▶|
    View: