|◀ ◀ 241 - 252 of 333 ▶ ▶|
View:

80% Ultra-Low NOX Multi 18-Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSU0802120A
    Manufacturer Item:
    N80MSU0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSU-ICP-Care_Misc
    N80MSU-ICP_Install

    Up to 92% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet
    • Item#:
    N92ESN0801716A
    Manufacturer Item:
    N92ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92ESN-Care_Misc
    N92ESN_Install
    N92ESN_Spec

    95% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 96% AFUE in upflow and horizontal positions up to 95% AFUE in downflow position
  • FixedSpeeds, Constant Torque ECM blower motor
  • Supports singlestage cooling units
  • Insulated heat exchanger compartment
  • Approved for Twinning application (0601714 through 1002120) with accessory (order separately)
  • Approved for Manufactured Housing/Mobile Home applications (0401410 through 1202422) with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
    • Item#:
    N95ESN0601714A
    Manufacturer Item:
    N95ESN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N95ESN-Care_Misc
    N95ESN_Install
    N95ESN_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
    • Item#:
    N92MSN0401712A
    Manufacturer Item:
    N92MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
    • Item#:
    N92MSN0601412A
    Manufacturer Item:
    N92MSN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
    • Item#:
    N92MSN0401412A
    Manufacturer Item:
    N92MSN0401412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    96% Performance Series Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+
    • Item#:
    N96VSN0601714A
    Manufacturer Item:
    N96VSN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0601714A

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSN1552420A
    Manufacturer Item:
    N80MSN1552420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    Oil Furnace Hi-Boy Multi-Position 126-145K BTU Output 85-86% AFUE 120 VAC 5 Ton Cooling

    Heil OMV High-Gloss Baked Highboy Multi-Position Oil Furnace, 86% AFUE, 115 VAC, 126000 - 154000 BTU, 2000 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • True 4-way multipoise unit that opens up installation possibilities
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Variable speed ECM motor that provides true constant CFM capabilities
    Item#:
    OMV154L20
    Manufacturer Item:
    OMV154L20A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OMV154L20_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80MSL0901714A
    Manufacturer Item:
    N80MSL0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSL-ICP-Care_Misc
    N80MSL-ICP_Install

    95% Standard NOX Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Up to 96% AFUE in upflow and horizontal positions up to 95% AFUE in downflow position
  • FixedSpeeds, Constant Torque ECM blower motor
  • Supports singlestage cooling units
  • Insulated heat exchanger compartment
  • Approved for Twinning application (0601714 through 1002120) with accessory (order separately)
  • Approved for Manufactured Housing/Mobile Home applications (0401410 through 1202422) with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
    • Item#:
    N95ESN1202422A
    Manufacturer Item:
    N95ESN1202422A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N95ESN-Care_Misc
    N95ESN_Install
    N95ESN_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80MSL1102120A
    Manufacturer Item:
    N80MSL1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSL-ICP-Care_Misc
    N80MSL-ICP_Install
    |◀ ◀ 241 - 252 of 333 ▶ ▶|
    View: