Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

US Motors Rescue 5464 2-Speed 1-PH Permanent Split Capacitor Condenser Fan Motor, 1/3 - 1/4 - 1/5 - 1/6 HP, 208 - 230 VAC, 825 RPM (Low), 835/825 RPM (High)

Automatic reset thermal overload protector
• Designed for use with 370 volt capacitors
• Special treated rotor for corrosion protection
• Includes lead end mounting holes for Rheem or Trane units
• 48" leads
• Extended mounting studs
• Ball bearings
• Reversible rotation
• High efficiency design
• Continuous duty, air over
• Side shell and lead end mounting screws included in carton
  

US Motors Rescue 5471 4-Speed 1-PH Permanent Split Capacitor Fan

Mars 61460 3-Pole Definite Purpose Contactor, 24 VAC at 50/60 Hz, 50 amp

63 amp non-inductive, 300 amp at 240 volt, 250 amp at 480 volt, 200 amp at 600 volt locked rotor
• The enclosed body design provides quiet operation and improved durability by reducing the intrusion of dust and dirt
• Silver cadmium oxide contacts provide increased contact life when switching inductive loads
• Coils - class F insulation
• Foot print compatible
• Recessed push to test butTon
• Accepts mars 780 and Furnas auxiliary switches
  

White Rodgers Cooling Controls 768A-845 Silicon Nitride Natural/LP Gas Hot Surface Igniter, 120 volt
white rodgers 768a-845

Advance Distributers Multi-Function Control Board

The Robertshaw 780 series direct spark controls are applicable to commercial cooking equipment, gas fired heating, and water heating systems of many types. The system acts on a demand for heat by a switch or thermostat to open the gas valve. At the same time, the 780 series ignition control supplies a spark to the electrode which ignites the gas. After the gas is lit, an electronic circuit proves the presence of flame using flame rectification. When the thermostat is satisfied, the gas valve will be closed to shut off the main burner gas.

Replaces one rod and/or two rod systems
• Easy-to-install with complete in-depth installation instructions
• Reduces truck stock inventory, saving space and money
• Non-pre-purge, enclosed
• 1 ignition attempts before lockout
  

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

9063 Inspection Mirror 1" x 2",

Copeland Parts 914-0037-10 Run Capacitor, 30 MFD, 370 VAC

Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Conpressor running reliably for the low haul. ,

Armstrong Air Inducer Motor 74K77 Draft Inducer

1/30 HP
• 230 VAC
• 3000 RPM
  

Space Pak BM-3001 Fiberboard Square Duct Plenum 8" x 4', Gallonvanized,

Beckett Parts CG4001 Chassis for CG4 Gas Conversion Burner

Airex Filters Pleated Air Filter 14" x 25" x 2"

How often do I need to change my air filter?

There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.

What is MERV?

MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles.