Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ 1177 - 1188 of 1381 ▶|
View:
  • Efficient single-stage scroll compressor
  • Efficient multi-speed ECM blower motor
  • Single-stage gas valve
  • Corrosion-resistant Stainless Steel heat exchanger
  • Reliable, direct spark gas ignition
  • System protecting high and low-pressure switches
  • Dense wire hail guard grille and raised coil design for protection against weather and debris
  • Corrosion-resistant aluminum coil design
  • Sound reducing features: vibration-reducing top panel, soft mounted compressor and blower motor
  • Compatible thermostat: heat/cool with humidity sensing
  • Rooftop or ground level installation
  • Cooling capacity: 25 tons
  • Heating capacity: 40,000130,000 BTU
  • Item#:
    PGD460115K000K
    Manufacturer Item:
    PGD460115K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Features/Benefits
  • One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance. R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system.
  • Easy Installation
  • Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications. Innovative Unit Base Design
  • On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging. Convertible duct configuration
  • Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode. Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%.
  • Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
  • Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Durable, dependable components
  • Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
  • Turbo-tubular heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
  • In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
  • ECM Motor is standard on all models.
  • Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
  • Thermostat controls
  • Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
  • Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-ozone depleting and low global warming potential R-454B refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety. High Pressure Switch provides added reliability for the compressor.
  • Item#:
    PGB448090K001B
    Manufacturer Item:
    PGB448090K001B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Features/Benefits
  • One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance. R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system.
  • Easy Installation
  • Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications. Innovative Unit Base Design
  • On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging. Convertible duct configuration
  • Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode. Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%.
  • Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
  • Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Durable, dependable components
  • Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
  • Turbo-tubular heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
  • In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
  • ECM Motor is standard on all models.
  • Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
  • Thermostat controls
  • Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
  • Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-ozone depleting and low global warming potential R-454B refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety. High Pressure Switch provides added reliability for the compressor.
  • Item#:
    PGB436060K000B
    Manufacturer Item:
    PGB436060K000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Quiet performance (as low as 70 decibels)*
  • Multi-speed blower motor for improved temperature and humidity control
  • Build to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • R-454B refrigerant continues our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • 3-Year No Hassle Replacement Limited Warranty+
  • 10-Year Parts Limited Warranty±
  • Item#:
    PHB448000H000B
    Manufacturer Item:
    PHB448000H000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV036H0FA0AAA
    Manufacturer Item:
    RAV036H0FA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV090H02A0AAA
    Manufacturer Item:
    RAV090H02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV060L0EA0AAA
    Manufacturer Item:
    RAV060L0EA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV150H02A0AAA
    Manufacturer Item:
    RAV150H02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV180H02A0AAA
    Manufacturer Item:
    RAV180H02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV120L02A0AAA
    Manufacturer Item:
    RAV120L02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV150L02A0AAA
    Manufacturer Item:
    RAV150L02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard
  • Item#:
    RAV090L02A0AAA
    Manufacturer Item:
    RAV090L02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 1177 - 1188 of 1381 ▶|
    View: