Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 1201 - 1212 of 1396 ▶ ▶|
View:

Package Gas/Electric 8.5 Ton Med Heat 460/3 R454B Medium Static

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RGF102LE2A0AAA
    Manufacturer Item:
    RGF102LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Roof Top Unit Gas 7.5 Ton 90K BTU 15 SEER 460/3 High Heat, Stand/Medium Static Direct Drive ECM W/X-Vane

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection
    • Item#:
    RGV090LF2A0AAA
    Manufacturer Item:
    RGV090LF2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RGVSERIES1 (2)

    Package Gas/Electric 6 Ton Med Heat 460/3 R454B Medium Static

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RGF072LE2A0AAA
    Manufacturer Item:
    RGF072LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Gas/Electric 7.5 Ton Med Heat 230/3 R454B High Static

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RGF090HE4AAAAA
    Manufacturer Item:
    RGF090HE4AAAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Gas/Electric 20 Ton Med Heat 230/3 R454B Medium Static

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RGF240HF2A0AAA
    Manufacturer Item:
    RGF240HF2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Roof Top Heat Pump 3 Ton 230/3 R410A

  • The new 3 to 6 ton RHV packaged heat pump rooftop units (RTU) with X-Vane Fan Technology were designed by customers for customers and integrate new technology to provide value added benefits never seen in this type of equipment before.
  • New major design features include:
  • Patented, industrys efficient indoor fan system using Vane Axial fan with electric commutated variable speed motor
  • Reliable, fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes
  • Upgraded unit control board with intuitive indoor fan adjustment
  • Reliable copper tube/aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs
  • New outdoor fan system with rugged  lightweight high impact composite fan blade
    • Item#:
    RHV036H0FA0AAA
    Manufacturer Item:
    RHV036H0FA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RHV-3-6_Spec
    RHV_Install

    Package Roof Top Unit A/C Gas 7-1/2 Ton 90K BTU 230/3 R410A 13 SEER High Heat

  • R-410A HFC refrigerant
  • ASHRAE 90.1 energy compliant efficiency levels
  • Two stage / two circuit cooling capacity control on 090-180 models
  • Two stage /single circuit cooling capacity control on 089, 100, 119 models
  • Rated in accordance with AHRI Standard 340/360
  • Designed in accordance with Underwriters Laboratories Standard 1995
  • Listed by UL and UL, Canada or ETL and ETL, Canada
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE
  • 62 Standard, sloping design; side or center drain
  • Gas efficiencies up to 82%
  • Induced draft combustion
  • Redundant gas valve, with 1 or 2 stages of heating
  • Pre-painted exterior panels and tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic.
  • Cooling operating range from 40°F up to 115°F.
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
    • Item#:
    RGS090HFCA0AAT
    Manufacturer Item:
    RGS090HFCA0AAT
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RGS_SPEC

    Package Gas/Electric 4 Ton Med Heat 230/3 R454B Medium Static

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RGF048HE2A0AAA
    Manufacturer Item:
    RGF048HE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Heat Pump 4 Ton 230/3 14 SEER High Static R454B

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RHF048H03A0AAA
    Manufacturer Item:
    RHF048H03A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Roof Top Heat Pump 7-1/2 Ton 208/230/3 R410A

  • The new 3 to 6 ton RHV packaged heat pump rooftop units (RTU) with X-Vane Fan Technology were designed by customers for customers and integrate new technology to provide value added benefits never seen in this type of equipment before.
  • New major design features include:
  • Patented, industrys efficient indoor fan system using Vane Axial fan with electric commutated variable speed motor
  • Reliable, fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes
  • Upgraded unit control board with intuitive indoor fan adjustment
  • Reliable copper tube/aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs
  • New outdoor fan system with rugged  lightweight high impact composite fan blade
    • Item#:
    RHV090L02A0AAA
    Manufacturer Item:
    RHV090L02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RHV-90-150_Spec

    Package Gas/Electric 7.5 Ton High Heat 230/3 R454B Medium Static

  • High-efficiency operation via innovative fan systems and coil design
  • Simplified maintenance due to fewer parts, new control board and tool-less filter access
  • Built on the original footprint for cost-effective, hassle-free installation
  • Optimum performance with intuitive system controls
  • ICP Commercial rooftop units feature a new outdoor fan system with an exclusive design. Its high-density composite fan blade provides longlasting quality, and the blade is dynamically balanced for quiet operation. Permanently lubricated motor bearings also provide lower maintenance costs.
  • ICP Commercial units operate using a time-tested round tube plate fin condenser coil design. In addition to their proven reliability, the 5/16 copper tube and aluminum fin condenser coils help raise efficiency and reduce the refrigerant charge.
    • Item#:
    RGF090HF2A0AAA
    Manufacturer Item:
    RGF090HF2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Roof Top Unit Gas 25 Ton 460/3 Medium Heat

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection
    • Item#:
    RGV300HEJA0AAA
    Manufacturer Item:
    RGV300HEJA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    |◀ ◀ 1201 - 1212 of 1396 ▶ ▶|
    View: