S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Peerless Boiler MI-E-08-SPRK-WPC-N Natural Gas Fired Cast Iron Water Boiler 245K BTU 84.6% W/Pump
Peerless Boiler MI-E-08-SPRK-WPC-N
Item#:
MI-E-08-SPRK-WPC-N
Manufacturer Item:
MI-E-08-SPRK-WPC-N
Manufacturer:
PB HEAT, LLC
Peerless Boiler MI-E-06-SPRK-WPC-N Natural Gas Fired Cast Iron Water Boiler 175K BTU 84.6% AFUE W/Pump
Peerless Boiler MI-E-03-SPRK-WPC-N
Modine PTP200SS0111 Unit Heater Gas Fired S/S 200K BTU 120 VAC,
,
,
Modine POH185A
Item#:
PTP200SS0111
Manufacturer Item:
PTP200SS0111
Manufacturer:
MODINE MFG COMPANY
Resideo Y8610U Intermittent 1 or 2-Rod Natural Gas/LP Pilot Retrofit Kit for Gas-Fired Atmospheric Furnaces, 24 VAC
,
- Intermittent pilot retrofit kits save energy by converting atmospheric standing pilot systems to intermittent pilot
- Use with natural or LP gas
- Provides 100% pilot gas shutoff if pilot fails to light, after 6 min delay, trial for ignition is repeated
- Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed
- 2 sec flame failure response time
- 0 or 30 sec pre-purge time
- Ignition sequence - continuous retry, after trial for ignition, pilot gas shuts off for 5 min then another trial for pilot ignition takes place
- Typical gas control - VR8204, VR8304
- Ignition source - internal high voltage spark generator
- Ignition trials to lockout - continuous retry
- 1 amp pilot, 2 amp at 24 VAC maximum valve load
- Q345, Q3451 typical ignition hardware
- 15 or 90 sec lockout timing and ignition trial time
- VR8204, VR8304 typical gas control
,
Honeywell TP970A2004
Item#:
Y8610U4001
Manufacturer Item:
Y8610U4001
Manufacturer:
HONEYWELL
Dunkirk 240009011 Blower and Gasket for xEB Series II Gas-Fired Hot Water Induced Draft Boilers
,
,
Dunkirk Boiler Inducer Motor 2272156
Item#:
240009011
Manufacturer Item:
240-009011
Manufacturer:
REGAL BELOIT AMERICA INC- FDC
ECR International 550001475 Blower Replacement Kit for 95M-200 Aluminum Gas Fired Boilers for Forced Hot Water
,
,
Dunkirk Boiler Inducer Motor 433-00-510
Item#:
550001475
Manufacturer Item:
550001475
Manufacturer:
ECR INTERNATIONAL, INC.
Coz.y Heating Parts 80062 Pilot Assembly Natural Gas VC201A-R VC351 Gas-Fired Vented Room Heaters
80062
Item#:
80062
Manufacturer Item:
80062
Manufacturer:
COZY HEATING SYSTEMS LLC
Peerless Boiler PF-300-NAT High Efficiency Natural Gas Water Boiler 95% 300K BTU
ECR International DCC115003600103
Item#:
PF-300-NAT
Manufacturer Item:
0007041
Manufacturer:
PB HEAT, LLC
APPLICATION VERSATILITY
Designed for the manufactured home market with flexibility in mind. Onepiece air handler with the ability to be factory built as upflow (solid door) or
downflow (louvered door) air handler. Can also be field configured to opposite
configuration with no additional parts or kits. 2 5 tons of cooling or heating
airflow with a range of electric heat kits.
MOTOR
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory. Direct drive blowers circulate air quietly and efficiently. Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service. CABINET
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 micro mat non-hygroscopic insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place. MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Disconnect does not protrude through the wall panel. ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive pull-style fuse integrated into board. WARRANTY
Hassle-free five-year limited parts warranty
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory. Direct drive blowers circulate air quietly and efficiently. Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service.
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 micro mat non-hygroscopic insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place.
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Disconnect does not protrude through the wall panel.
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive pull-style fuse integrated into board.
Hassle-free five-year limited parts warranty
Williamson -Thermoflo PMP210DDXWS2
Item#:
AED-002+FCL10
Manufacturer Item:
AED-002+FCL10
Manufacturer:
ASPEN MFG. LLC
ECR International Heating Parts 14614014 Fire Door Insulation (ECR International)
ECR International Heating Parts Z99
Item#:
14614014
Manufacturer Item:
146-140-14
Manufacturer:
ECR INTERNATIONAL, INC.
ECR International Heating Parts 146-14-015 Fire Door Insulation
ECR International Heating Parts 1260006
Item#:
146-14-015
Manufacturer Item:
146-14-015
Manufacturer:
ECR INTERNATIONAL, INC.