Features

95% residential gas furnace CSA certified

4 way multi-poise design

7-Segment LED all units

Ignition System  Direct Spark Ignition for reliability and longevity

Water Management System with patented Blocked Drain Sensor

Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.

Low profile 34 inch cabinet ideal for space constrained installations.

Blower Shelf design  serviceable in all furnace orientations

Pre marked hoses  insures proper system drainage

Vent with 2" or 3" PVC

Replaceable Collector box

Hemmed edges on cabinet and doors

Constant Torque electrically commutated motor

Quarter turn fasteners for tool less access

Integrated control boards feature dip switches for easy system set up

Self priming condensate trap

Solid bottom included

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

Fujitsu FF95ST304017M4SNAAS

Fujitsu FF125245TS80D

Features:

96% residential gas furnace CSA certified

4 way multi-poise design

Two stages of operation to save energy and maintain optimal comfort level.

Variable speed blower motor technology provides ultimate humidity control, quieter sound levels, and year round energy savings.

EcoNet® enabled HVAC product

Diagnostics 7-Segment LED all units

Ignition System  DSI for reliability and longevity

Water Management System with patented Blocked Drain Sensor

Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.

Low profile 34 inch cabinet ideal for space constrained installations.

Blower Shelf design  serviceable in all furnace orientations

Pre marked hoses  insures proper system drainage

Vent with 2" or 3" PVC

Replaceable Collector box

Hemmed edges on cabinet and doors

Quarter turn fasteners for tool less access

Integrated control boards feature dip switches for easy system set up

Self priming condensate trap

Solid bottom included

Compatible with single or two stage thermostats. For optimal performance a two stage thermostat is recommended.

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

Fujitsu FF80TV407517UHNCAAP

Features

95% residential gas furnace CSA certified

4 way multi-poise design

7-Segment LED all units

Ignition System  Direct Spark Ignition for reliability and longevity

Water Management System with patented Blocked Drain Sensor

Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.

Low profile 34 inch cabinet ideal for space constrained installations.

Blower Shelf design  serviceable in all furnace orientations

Pre marked hoses  insures proper system drainage

Vent with 2" or 3" PVC

Replaceable Collector box

Hemmed edges on cabinet and doors

Constant Torque electrically commutated motor

Quarter turn fasteners for tool less access

Integrated control boards feature dip switches for easy system set up

Self priming condensate trap

Solid bottom included

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

Fujitsu FF95ST307017M4SNAAS

Unique Manufactured Housing Design with a robust, 19 7/8"W, fully-insulated cabinet to fit the standard MH footprint. The MG2R is our flagship high-efficiency, HUD-compliant, gas furnace. AC-Ready 4-Ton ECM Blower with 5-speed taps, with/without a factory-installed 20"H coil box; allowing for a field-installed 20"/26"H coil box to suit your capacity and access needs. Refer to Split System sell sheets for AHRI-rated coil-fit matches. Quick LP Conversion with an easy-access gas valve regulator and manifold, using the factory-provided LP orifices included in the unit-literature kit. Category IV Venting Approval allows for vertical or horizontal direct venting using an approved non-metallic two-pipe system, or a concentric termination kit for application flexibility. Dependable Warranty and Support, handled directly by Style Crests dedicated HVAC Team, offering the most competitive warranty coverage and service in the Manufactured Housing Industry.

Nortek Global (Intertherm) MG2R060F1ACM2

Unique Manufactured Housing Design with a robust, 19 7/8"W, fully-insulated cabinet to fit the standard MH footprint. The MG2R is our flagship high-efficiency, HUD-compliant, gas furnace. AC-Ready 4-Ton ECM Blower with 5-speed taps, with/without a factory-installed 20"H coil box; allowing for a field-installed 20"/26"H coil box to suit your capacity and access needs. Refer to Split System sell sheets for AHRI-rated coil-fit matches. Quick LP Conversion with an easy-access gas valve regulator and manifold, using the factory-provided LP orifices included in the unit-literature kit. Category IV Venting Approval allows for vertical or horizontal direct venting using an approved non-metallic two-pipe system, or a concentric termination kit for application flexibility. Dependable Warranty and Support, handled directly by Style Crests dedicated HVAC Team, offering the most competitive warranty coverage and service in the Manufactured Housing Industry.

Nortek Global (Intertherm) MG2R072F1AAM1

FEATURES and BENEFITS

Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.

Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.

Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.

Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.

High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.

Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.

Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.

Reliable Burner: With uniform flame pattern extends life of heat exchanger.

Nortek CMF95-072T-PG2

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary. Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement.

Continuous fan options for indoor air quality (IAQ) performance.

Airflow leakage less than 2% of nominal airflow for duct performance testing conditions.

Low unit current requirement for easy replacement application.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety.

Inducer rotates for easy conversion of venting options.

The 26k model is not convertible for use with propane (LP) gas. All other models are fieldconvertible for use with propane (LP) gas with an optional propane accessory conversion kit.

Five-speed direct drive standard ECM blower motor.

Hi-tech tubular aluminized steel primary heat exchanger.

Corrosion resistant stainless steel secondary heat exchanger including rear cover pan and front vestibule panel.

Quiet inducer operation.

Timed on, adjustable off blower capability for maximum comfort.

Blower door safety switch below the blower deck.

Solid removable bottom panel allows easy conversion for bottom return air applications.

Twinning terminal for controlling two identical models installed with a common duct system. No external kit is required.

External air filters are used for maximum flexibility in meeting customers' IAQ needs.

1/4 turn knobs are provided for easy independent door removal.

Insulated blower compartment for thermal and acoustic performance.

Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.

Protection included from air intake, exhaust vent, or condensate blockage. Venting applications may be installed as either two-pipe sealed combustion or single-pipe vent (except 26k) using indoor combustion air.

No special vent termination required.

These condensing furnace models produce <40 ng/J NOx emissions.

Fold-up duct connector flanges for application flexibility.

Patented self-priming internal condensate trap design for easy installation.

York RG19080C16MPS1

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary. Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement.

Continuous fan options for indoor air quality (IAQ) performance.

Airflow leakage less than 2% of nominal airflow for duct performance testing conditions.

Low unit current requirement for easy replacement application.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety.

Inducer rotates for easy conversion of venting options.

The 26k model is not convertible for use with propane (LP) gas. All other models are fieldconvertible for use with propane (LP) gas with an optional propane accessory conversion kit.

Five-speed direct drive standard ECM blower motor.

Hi-tech tubular aluminized steel primary heat exchanger.

Corrosion resistant stainless steel secondary heat exchanger including rear cover pan and front vestibule panel.

Quiet inducer operation.

Timed on, adjustable off blower capability for maximum comfort.

Blower door safety switch below the blower deck.

Solid removable bottom panel allows easy conversion for bottom return air applications.

Twinning terminal for controlling two identical models installed with a common duct system. No external kit is required.

External air filters are used for maximum flexibility in meeting customers' IAQ needs.

1/4 turn knobs are provided for easy independent door removal.

Insulated blower compartment for thermal and acoustic performance.

Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.

Protection included from air intake, exhaust vent, or condensate blockage. Venting applications may be installed as either two-pipe sealed combustion or single-pipe vent (except 26k) using indoor combustion air.

No special vent termination required.

These condensing furnace models produce <40 ng/J NOx emissions.

Fold-up duct connector flanges for application flexibility.

Patented self-priming internal condensate trap design for easy installation.

York RG19060A10MPS1