|◀ ◀ 337 - 348 of 477 ▶ ▶|
View:

Heat Pump Condensing Unit High Efficiency 1.5 Ton

REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products N4H5S60CKAAA

    • Item#:
    NXH518GKP
    Manufacturer Item:
    NXH518GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    NXH5-ICP-Service_Misc
    NXH5-ICP_Broc
    NXH5-ICP_Install
    NXH5-ICP_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701712A

    • Item#:
    N80ESN0701712A
    Manufacturer Item:
    N80ESN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701712A_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701716A

    • Item#:
    N80ESN1352420A
    Manufacturer Item:
    N80ESN1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1352420A_Spec

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0802120A

    • Item#:
    N96MSN0802120A
    Manufacturer Item:
    N96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    Heat Pump Condensing Performance Series 5 Ton

    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection

    International Comfort Products N4H442GKP

    • Item#:
    N4H460GH
    Manufacturer Item:
    N4H460GHP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H4-ICP-Wiring_Misc
    N4H4-ICP_Broc
    N4H4-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193



    International Comfort Products N80MSN0451714A

    • Item#:
    N80MSN0901714A
    Manufacturer Item:
    N80MSN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    96% Gas Heating Furnace

  • Up to 97.0% AFUE in upflow and horizontal positions, 95% AFUE in downflow position
  • Variable-speed, constant torque ECM blower motor
  • Supports single-stage and two-stage cooling units
  • Dehumidification feature in cooling
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0%
    at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Control of continuous fan speed from a compatible thermostat



    International Comfort Products G97CMN1202422B

    • Item#:
    N96VSN0601716B
    Manufacturer Item:
    N96VSN0601716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0601716B_Spec

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0801716A

    • Item#:
    N96MSN0801716A
    Manufacturer Item:
    N96MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN1102420A

    • Item#:
    N80MSN1102420A
    Manufacturer Item:
    N80MSN1102420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products G97CMN1002122B

    • Item#:
    N80ESN0701716A
    Manufacturer Item:
    N80ESN0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701716A_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN1002120A

    • Item#:
    N92MSN1002120A
    Manufacturer Item:
    N92MSN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0902120A

    • Item#:
    N80MSN0902120A
    Manufacturer Item:
    N80MSN0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install
    |◀ ◀ 337 - 348 of 477 ▶ ▶|
    View: