|◀ ◀ 145 - 156 of 255 ▶ ▶|
View:

Oil Burner Kit Riello F3 International Comfort Products

International Comfort Products N01F055 Oil Burner Kit Riello F3,
,



N01F055


N01F055

Item#:
N01F055
Manufacturer Item:
N01F055
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

Oil Burner International Comfort Products

International Comfort Products Fast Heating Parts N01F054 Oil Burner International Comfort Products

International Comfort Products Fast Heating Parts N01F054

Item#:
N01F054
Manufacturer Item:
N01F054
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

Oil Burner OM4 Chimney Vented Oil Furnace International Comfort Products

International Comfort Products N01F053 Oil Burner OM4


N01F053


N01F053

Item#:
N01F053
Manufacturer Item:
N01F053
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

Oil Burner OMF112 Chimney Vented Oil Furnace International Comfort Products

International Comfort Products N01F052 Oil Burner OMF112


N01F052


N01F052

Item#:
N01F052
Manufacturer Item:
N01F052
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

ICP Heat Pump Condensing Performance Series 4 Ton

REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • Low pressure switch
  • Round tube / aluminum plate fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    N4H448GHP

    • Item#:
    N4H448GHP
    Manufacturer Item:
    N4H448GHP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H4-ICP-Wiring_Misc
    N4H4-ICP_Broc
    N4H4-ICP_Install
    N4H4-ICP_Spec

    Air Conditioning Condensing Unit Performance Series 4 ton

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Filter- Drier supplied with every unit for field installation
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant BUILT TO LAST
  • Baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 2 (51mm) spacing standard, alternate models available with 3/8 (10mm) grille spacing for extra protection (hail guard
    • Item#:
    N4A348AKG
    Manufacturer Item:
    N4A348AKG
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A31-Wiring_Misc
    N4A31_Broc
    N4A31_Install

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80ESN0701712A
    Manufacturer Item:
    N80ESN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701712A_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80ESN1352420A
    Manufacturer Item:
    N80ESN1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1352420A_Spec

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)
    • Item#:
    N96MSN0802120A
    Manufacturer Item:
    N96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    Up to 92% Standard NOX Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet
    • Item#:
    N92ESN0601412A
    Manufacturer Item:
    N92ESN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92ESN-Care_Misc
    N92ESN_Install
    N92ESN_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193



    International Comfort Products N80MSN0901714A


    International Comfort Products N80MSN0901714A

    • Item#:
    N80MSN0901714A
    Manufacturer Item:
    N80MSN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    96% Gas Heating Furnace

  • Up to 97.0% AFUE in upflow and horizontal positions, 95% AFUE in downflow position
  • Variable-speed, constant torque ECM blower motor
  • Supports single-stage and two-stage cooling units
  • Dehumidification feature in cooling
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0%
    at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Control of continuous fan speed from a compatible thermostat



    N96VSN0601716B


    N96VSN0601716B

    • Item#:
    N96VSN0601716B
    Manufacturer Item:
    N96VSN0601716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0601716B_Spec
    |◀ ◀ 145 - 156 of 255 ▶ ▶|
    View: