|◀ 253 - 264 of 606 ▶|
View:
Honeywell Home M847D-VENT/U 2-Position Replacement Spring Return Actuator, 24 volt, Power Open/Spring Closed Motor
  • The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers
  • Low voltage, spring return damper actuators
  • Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16 Inch diameter coupling style dampers
  • Adjustable range stops
,
,



Honeywell M847D-VENT


Honeywell M847D-VENT

Item#:
M847D-VENT
Manufacturer Item:
M847D-VENT
Manufacturer:
HONEYWELL
Honeywell Home M847D-ZONE/U 2-Position Replacement Spring Return Actuator, 24 volt, Power Closed/Spring Open Motor
  • The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers
  • Low voltage, spring return damper actuators
  • Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16 Inch diameter coupling style dampers
  • Adjustable range stops
  • Direct replacement for M847D1004
,
,



Honeywell M847D-ZONE


Honeywell M847D-ZONE

Item#:
M847D-ZONE
Manufacturer Item:
M847D-ZONE
Manufacturer:
HONEYWELL
Resideo PV-001RP Replacement Air Vent Assembly,
,



PV-001RP


PV-001RP

Item#:
PV-001RP
Manufacturer Item:
PV-001RP
Manufacturer:
HONEYWELL

RC840T-120

Item#:
RC840T-120
Manufacturer Item:
RC840T-120
Manufacturer:
HONEYWELL
Honeywell M836A1042/U Spring Return Damper Actuator, 24 VAC , 60 Hz
  • Operate outdoor air dampers for combustion or makeup air in residential and light commercial applications
  • Operate changeover dampers for heating and cooling systems
  • Operate minimum position dampers for ventilation and similar applications
  • Spring returns motor to start position on power failure
  • Drive shafts located on both sides of motor
  • Adjustable auxiliary switch for cascading motors or operating auxiliary equipment
  • Thermal breaker for overload protection during lifting stroke or if motor stalls
Sid Harvey Item #:R242-10: Replaces Part #:'s : 1C655,
,



R242-10


R242-10

Item#:
R242-10
Manufacturer Item:
M836A1042
Manufacturer:
HONEYWELL

Honeywell R540-125

Item#:
R540-125
Manufacturer Item:
R8225A1017
Manufacturer:
HONEYWELL

Honeywell R540-30

Item#:
R540-30
Manufacturer Item:
R4222D1013
Manufacturer:
HONEYWELL

Honeywell R540-20

Item#:
R540-20
Manufacturer Item:
R8222D1014
Manufacturer:
HONEYWELL
Honeywell R7847A1033/U Green Rectifying Flame Amplifier for Primary Safety Control7800 Series Relay
  • Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 series relay modules
  • Flame failure response time of 2 or 3 sec
  • Flame signal strength ranges from 0 - 5 VDC
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Color coded labels identify flame detection type
  • Dynamic self-check amplifier test the detectors and all electronic components in the flame detection system 7800 series relay module locks out on safety shutdown with flame detection system failure
  • Compatible with existing Honeywell flame detectors
  • Use with flame sensor gas rectifying flame rods C7004, C7005, C7007, C7008, C7009, Q179; gas, oil, coal ultraviolet flame sensor C7012A, C
,
,



R7847A1033


R7847A1033

Item#:
R7847A1033
Manufacturer Item:
R7847A1033
Manufacturer:
HONEYWELL

Honeywell R520-32

Item#:
R520-32
Manufacturer Item:
R845A1030
Manufacturer:
HONEYWELL

Honeywell R520-26

Item#:
R520-26
Manufacturer Item:
RA832A1066
Manufacturer:
HONEYWELL

Honeywell R510-15

Item#:
R510-15
Manufacturer Item:
RA89A1074
Manufacturer:
HONEYWELL
|◀ 253 - 264 of 606 ▶|
View: