Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Efficiency

14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2

(depending on unit size and indoor combination installed)

Indoor air quality accessories available

Sound

Sound levels as low as 69 dBA with accessory sound blanket

Comfort

System supports programmable or standard thermostat controls

Reliability

Non-ozone depleting refrigerant

Scroll compressor

Internal pressure relief valve

Internal thermal overload

Loss of charge switch

Filter drier

Balanced refrigeration system for maximum reliability

Features

Intelligent control features help adjust the output capacity, allowing the unit to keep the temperature and humidity at your desired levels without fluctuation

The high efficiency variable capacity inverter compressor can adjust to any speed between 33% and 110% (in1% increments) to perfectly cool and heat your home using minimal energy for maximum comfort

1-1/2 or 2 ton cooling capacity - 20,000 BTU's to 24,000 BTU's heating capacity

The air coil design provides exceptional heat transfer and low air resistance

Direct drive fan blades provide vortex suppresion to reduce sound of airflow exiting the condenser giving sound levels as low as 56 dB

Condensers include an electronic expansion valve (EEV) to ensure proper refrigerant flow during all conditions

Compressor liquid return protection - Compressor high or low compression ratio protection - Compressor high temperature protection - High / low voltage protection and over current protection - IPM and electronic control board high temperature protection

Heat Controller HBV042A3C30CRT Water Source Heat Pump 3 1/2 Ton 13.1 EER 208/230 VAC Right Return R410A,

Features

Intelligent control features help adjust the output capacity, allowing the unit to keep the temperature and humidity at your desired levels without fluctuation

The high efficiency variable capacity inverter compressor can adjust to any speed between 33% and 110% (in1% increments) to perfectly cool and heat your home using minimal energy for maximum comfort

1-1/2 or 2 ton cooling capacity - 20,000 BTU's to 24,000 BTU's heating capacity

The air coil design provides exceptional heat transfer and low air resistance

Direct drive fan blades provide vortex suppresion to reduce sound of airflow exiting the condenser giving sound levels as low as 56 dB

Condensers include an electronic expansion valve (EEV) to ensure proper refrigerant flow during all conditions

Compressor liquid return protection - Compressor high or low compression ratio protection - Compressor high temperature protection - High / low voltage protection and over current protection - IPM and electronic control board high temperature protection

Bosch Standard Features
White Pre-Painted Sheet Metal Cabinets
No visible screws
Appliance White for a Clean - Durable Look
Door Handles - for Easy Removal for Service
LCD Display - for Easy View of Unit Operation
Up to 32.0 EER @ PL GLHP
Compliant with Energy Start Tier 3
Electronically Communicated Motors
Your choice of Variable Speed ECM or Fix-Torque ECM
Constant Torque High Efficiency ECM
Constant CFM Variable Speed High Effi cient ECM
Supply Air Connection - Top, Side, and Back (Kit required)
Return Air Connection - Right or Left Side
Electrical Control Box Relocation
Patent: Blower Configurability
Can Also Order Right Hand Or Left Hand Return From
Closed Cell (Fiber Free) Insulation
Less than 2% Air Leakage Rate

Diversitech 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.

Diversitech gray heat pump riser that provides 6" of elevation for condensers, heat pumps, and air handlers. Heat pump risers are most commonly used to lift heat pumps above the snow line. This helps prevent damage to the coils caused by ice build up from drainage of condensate when operating in heat pump mode. Heat pump risers are available in 1 or 2 piece designs, multiple sizes and colors.

Diversitech 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.