|◀ ◀ 1165 - 1176 of 1352 ▶ ▶|
View:

Air Handler 2 Ton 1-Stage PSC Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected
    • Item#:
    FHFSPS2421SJZTNAN00
    Manufacturer Item:
    FHFSPS2421SJZTNAN00
    Manufacturer:
    FUJITSU
     
    FHFSPS2421SJZTNAN00_Spec

    Air Handler 2.5 Ton 1-Stage PSC Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected
    • Item#:
    FHFSPS3024SJZTNAN00
    Manufacturer Item:
    FHFSPS3024SJZTNAN00
    Manufacturer:
    FUJITSU
     
    FHFSPS3024SJZTNAN00_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected
    • Item#:
    FHFSTT2421SJZTNAB10
    Manufacturer Item:
    FHFSTT2421SJZTNAB10
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB10_Spec

    Air Handler 3 Ton 2-Stage Constant Torque R410A 21" W x 50-1/2" x 22" D

  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections
  • Air handlers are 230/1 Volts
    • Item#:
    FHSMTT3621SAZTNAN00
    Manufacturer Item:
    FHSMTT3621SAZTNAN00
    Manufacturer:
    FUJITSU
     
    FHSMTT3621SAZTNAN00_Spec

    Air Handler 3 Ton Multi-Position Constant Torque TXV 208/230 17-1/2" W x 42-1/2" H x 22" D

  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections
  • Air handlers are 230/1 Volts
    • Item#:
    FHRNTT3617SJZTNA
    Manufacturer Item:
    FHRNTT3617SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNTT3617SJZTNA_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected
    • Item#:
    FHFSTT2421SJZTNAB05
    Manufacturer Item:
    FHFSTT2421SJZTNAB05
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB05_Spec

    Air Handler 3 Ton Multi Position 120/1 PSC Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193
    • Item#:
    FHRNTT3617SAZTNA
    Manufacturer Item:
    FHRNTT3617SAZTNA
    Manufacturer:
    FUJITSU
     
    FHRNTT3617SAZTNA_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected
    • Item#:
    FHFSTT2421SJZTNAB08
    Manufacturer Item:
    FHFSTT2421SJZTNAB08
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB08_Spec

    Air Handler 2-Stage 3 Ton 208/240 VAC

    Item#:
    FH3621TLTJMN
    Manufacturer Item:
    FH3621TLTJMN
    Manufacturer:
    FUJITSU
     
    FH3621TLTJMN_Spec

    Item#:
    FH6024TTSJSN
     
    FHTTS-Fujitsu_Broc
    FHTTS-Fujitsu_Spec

    Item#:
    FHRNPS3617SJZTNA
     
    FHRNPS3617SJZTNA_Broc

    Air Handler 2 Ton 3 Stage ECM Motor R410A

  • Constant CFM Motor: When paired with the EcoNet® Smart Thermostat, the motor gradually auto-adjusts from low capacity to 100% of capacity to meet comfort requirements  allowing for ultimate humidity control, quieter sounds levels and year-round energy savings When paired with a 24V two-stage thermostat, the air handler runs in 3-speeds to match airflow with outdoor unit
  • Diagnostics  Easy & Quick Diagnostics & Ongoing Monitoring with Bluetooth®2 Technology & EcoNet®: With the BluArch & EcoNet® Apps, built-in technology makes monitoring, troubleshooting and repairing the product easier than ever before The Fujitsu Line with the BluArch App via Bluetooth® technology, features up to 62% faster overall diagnostics over other residential HVAC brands1
  • No Dip Switches = Fast Seamless Final Installation: The Fujitsu Line, with BluArch App-based commissioning via Bluetooth® technology, features up to 54% faster installation over other residential HVAC brands*
  • New Fujitsu Air Handler Control Board (AHC): Enables constant CFM airflow  Introduces Bluetooth® connectivity for access to advanced diagnostic information from the Contractor App on your mobile device  Maintains EcoNet® diagnostics for remote access when shared by the homeowner
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Quieter Sound Levels: Provided by sturdy cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
    • Item#:
    FHRNVV2417SJZTCA
    Manufacturer Item:
    FHRNVV2417SJZTCA
    Manufacturer:
    FUJITSU
     
    FHRNVV2417SJZTCA_Spec
    |◀ ◀ 1165 - 1176 of 1352 ▶ ▶|
    View: