|◀ 901 - 912 of 1140 ▶|
View:
Copeland Parts 030-0187-01 Crankcase Heater Sleeve for 2D 3D Compressors
  • Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Conpressor running reliably for the low haul. ,
    ,



    030-0187-01


    030-0187-01

  • Item#:
    030-0187-01
    Manufacturer Item:
    030-0187-01
    Manufacturer:
    COPELAND LP
    All Snappy products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.
    Item#:
    100-145
    Manufacturer Item:
    100-145
    Manufacturer:
    SMOKE PIPE & SHEET METAL
    Warwick Hanger 1400-11 CTS J Hook Hanger 1"
    The J-hook is an exceptional hanger that saves time and money. Hugs pipes snug and secure at easily determined grades. Snap in lock feature holds pipe securely, glueable with same adhesive used for pipe fittings.

    Warwick Hanger 1400-11

    Item#:
    1400-11
    Manufacturer Item:
    1400-11
    Manufacturer:
    WARWICK HANGER COMPANY

    taco 1600-169rp

    Item#:
    1600-169RP
    Manufacturer Item:
    1600-169RP
    Manufacturer:
    TACO INC.
    Warwick Hanger 2000-1 Split Ring Hanger,

    2000-1

    Item#:
    2000-1
    Manufacturer Item:
    2000-1
    Manufacturer:
    ELECTRICAL PARTS & FITTINGS
    Warwick Hanger 200-1 Copper Coated Natick Pipe Hangers 1/2"
    Used to suspend copper tubing from floor joists

    Warwick Hanger 200-1

    Item#:
    200-1
    Manufacturer Item:
    200-1
    Manufacturer:
    WARWICK HANGER COMPANY
    Warwick Hanger 200-10 Copper Coated Natick Pipe Hangers 1-1/4"
    Used to suspend copper tubing from floor joists.,

    Warwick Hanger 200-10

    Item#:
    200-10
    Manufacturer Item:
    200-10
    Manufacturer:
    WARWICK HANGER COMPANY

    3U0150-01

    Item#:
    3U0150-01
    Manufacturer Item:
    3U0150-01
    Manufacturer:
    HOSHIZAKI NORTHEASTERN DC INC.

    Sid Harvey 300-1

    Item#:
    300-1
    Manufacturer Item:
    300-1
    Manufacturer:
    MITCO MFG.

    322110-01

    Item#:
    322110-01
    Manufacturer Item:
    322110-01
    Manufacturer:
    HOSHIZAKI NORTHEASTERN DC INC.
    Air conditioning, heat pump, truck refrigeration and many other applications require intermittent operation of the refrigeration compressor. Especially in remote applications, the suction line may trap or hold quantities of liquid which are suddenly dumped into the compressor as it starts up. This is frequently the cause of broken valves, pisTons, broken or bent connecting rods, blown gaskets and bearing washout. Proper installation of the Refrigeration Research suction accumulator in the suction line, just before the compressor, eliminates damage. If correctly sized, relatively large quantities of liquid refrigerant may return through the suction line and the suction accumulator prevents damage to the compressor. Liquid is temporarily held in the suction accumulator and metered back to the compressor along with any oil, at a controlled rate, through the metering orifice. Therefore, damage to the compressor is prevented and the compressor immediately and quietly goes to work.
      ,
      ,



      Refrigeration Research 3700-01


      Refrigeration Research 3700-01

      Item#:
      3700-01
      Manufacturer Item:
      3700-01
      Manufacturer:
      REFRIGERATION RESEARCH INC
      A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.
      • Treats fractional to 1.5 Ton
      • Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
      • Eliminates expensive leak search and repair
      • Travels with refrigerant to find leaks fast
      • Utilizes a reusable hose
      ,
      ,



      Nu-Calgon 4050-01


      Nu-Calgon 4050-01

      Item#:
      4050-01
      Manufacturer Item:
      4050-01
      Manufacturer:
      NU-CALGON
      |◀ 901 - 912 of 1140 ▶|
      View: