S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry
9063 Inspection Mirror 1" x 2",
,
,
Bramec 9063
Bramec 9063
Armstrong Air Heating Parts 74K77 Draft Inducer
- 1/30 HP
- 230 VAC
- 3000 RPM,
,74K77
74K77
Item#:
74K77
Manufacturer Item:
74K77
Manufacturer:
ALLIED AIR ENTERPRISES
Space Pak BM-3001 Fiberboard Square Duct Plenum 8" x 4', Gallonvanized,
Space Pak A/C Parts BM-3001
Space Pak A/C Parts BM-3001
Item#:
BM-3001
Manufacturer Item:
44BM-2560
Manufacturer:
SPACE PAK
Beckett Parts CG4001 Chassis for CG4 Gas Conversion Burner
,
,
Beckett Parts CG4001
Beckett Parts CG4001
Item#:
CG4001
Manufacturer Item:
CG4
Manufacturer:
RW BECKETT CORP
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles.
GP10014252
GP10014252
Watts Water LF3001A-3/4 Dielectric Union 3/4" FPT x Sweat
dielectric unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a female iron pipe thread to solder connection, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an electric current from occurring.
dielectric unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a female iron pipe thread to solder connection, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an electric current from occurring.
- Buna-N gasket Designed and manufactured to the highest quality standards
- Maximum pressure is 250 psi (17.2 bar)
- Maximum temperature 180 degrees F (82 degrees C)
- Individually factory certified to withstand a minimum of 600 volts on a dry line with no flashover
- FIP thread to solder connections
- Meets federal specifications for tensile strength and thread end connections,
,LF3001A-3/4
LF3001A-3/4
Watts Water LF3001A-1/2 Dielectric Union 1/2" OD x FPT Lead-Free,
,
,
LF3001A-1/2
LF3001A-1/2
Item#:
LF3001A-1/2
Manufacturer Item:
0009864
Manufacturer:
WATTS REGULATOR CO
Watts Water LF3001A-1-1/4 Dielectric Union 1-1/4" FPT x OD Lead Free
dielectric unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a female iron pipe thread to solder connection, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an electric current from occurring.
dielectric unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a female iron pipe thread to solder connection, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an electric current from occurring.
- Buna-N gasket Designed and manufactured to the highest quality standards
- Maximum pressure is 250 psi (17.2 bar)
- Maximum temperature 180 degrees F (82 degrees C)
- Individually factory certified to withstand a minimum of 600 volts on a dry line with no flashover
- FIP thread to solder connections
- Meets federal specifications for tensile strength and thread end connections,
,LF3001A-1-1/4
LF3001A-1-1/4
Item#:
LF3001A-1-1/4
Manufacturer Item:
00098867
Manufacturer:
WATTS REGULATOR CO
Watts Water LF3001A-1 Dielectric Union 1" FPT x Sweat Brass
Watts Water LF3001A-1/2
Watts Water LF3001A-1/2
Bacharach 0012-7014 Tempoint Dial Thermometer, 200 - 1000 deg F
,
- 6" length stem
- Part of fyrite classic oil kit
,
Sid Harvey N29-76
Sid Harvey N29-76
Item#:
N29-76
Manufacturer Item:
12-7014
Manufacturer:
MITCO MFG.
Peerless Boiler Parts PP5001-1 WBV Water Flue Collar
PP5001-1
Item#:
PP5001-1
Manufacturer Item:
90568
Manufacturer:
PB HEAT, LLC
Beckett Parts 21268 Blower Wheel
- CF100/1400 5.59" x 3.09"
- ,
,Beckett Parts 21268
Beckett Parts 21268
Item#:
21268
Manufacturer Item:
21268U
Manufacturer:
RW BECKETT CORP
