|◀ 373 - 384 of 443 ▶|
View:
JB Industries DV-22 Digital Vacuum Gauge 10-10000 Micron
Item#:
DV-22
Manufacturer Item:
DV-22N
Manufacturer:
JB INDUSTRIES
Multi-position design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
    Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wider range of applications thancompetitive packaged air handler lines
  • Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes
  • Dual circuit can be field modified for use on single circuit condensers
  • Cooling coils with mechanically bonded fins provide peak heat transfer
  • Optional 2-speed indoor fan with VFD controller
  • Standard factory-installed thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance - removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24-volt terminal block for control wiring connection
  • Hot water coil, steam coil, and electric heat accessories are available
  • Item#:
    FAS240HAAA2AUA
    Manufacturer Item:
    FAS240HAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Multi-position design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
    Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wider range of applications thancompetitive packaged air handler lines
  • Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes
  • Dual circuit can be field modified for use on single circuit condensers
  • Cooling coils with mechanically bonded fins provide peak heat transfer
  • Optional 2-speed indoor fan with VFD controller
  • Standard factory-installed thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance - removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24-volt terminal block for control wiring connection
  • Hot water coil, steam coil, and electric heat accessories are available
  • Item#:
    FAS240SAAA2AUA
    Manufacturer Item:
    FAS240SAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Multi-position design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
    Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wider range of applications thancompetitive packaged air handler lines
  • Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes
  • Dual circuit can be field modified for use on single circuit condensers
  • Cooling coils with mechanically bonded fins provide peak heat transfer
  • Optional 2-speed indoor fan with VFD controller
  • Standard factory-installed thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance - removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24-volt terminal block for control wiring connection
  • Hot water coil, steam coil, and electric heat accessories are available
  • Item#:
    FAS240HAAA2A0A
    Manufacturer Item:
    FAS240HAAA2A0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Features
  • 80% residential Gas Furnace CSA certified
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34" cabinet ideal for space constrained installations
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Insulated blower compartment
  • Constant Torque electrically commutated motor

  • Item#:
    FF100215TS80X
    Manufacturer Item:
    FF100215TS80X
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • 3 way multi poise design UF / HZ
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Solid doors provide quiet operation
  • Solid bottom
  • Insulated blower compartment
  • Low profile 34" cabinet ideal for space constrained installations
  • Blower shelf design  serviceable in all furnace orientations
  • Hemmed edges on cabinets and doors
  • 1/4 turn door knobs for tool less access
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Constant Torque electrically commutated motor
  • Cabinet air leakage less than 2% at 1 inch H 2O when tested in accordance with ASHRAE standard 193
    Fujitsu FF100215TS80M
  • Item#:
    FF100215TS80M
    Manufacturer Item:
    FF100215TS80M
    Manufacturer:
    FUJITSU
  • Features
  • 96% residential gas furnace CSA certified
  • 4 way multi-poise design
  • Two stages of operation to save energy and maintain optimal comfort level.
  • Diagnostics 7-Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for easy system set up
  • Self priming condensate trap
  • Solid bottom included
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    Fujitsu FF100215TT96M
  • Item#:
    FF100215TT96M
    Manufacturer Item:
    FF100215TT96M
    Manufacturer:
    FUJITSU(MINI-SPLITS)
  • Features
  • 96% residential gas furnace CSA certified
  • 4 way multi-poise design
  • Two stages of operation to save energy and maintain optimal comfort level.
  • Variable speed blower motor technology provides ultimate humidity control, quieter sound levels, and year round energy savings.
  • EcoNet® enabled HVAC product
  • Diagnostics 7-Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for eas system set up
  • Self priming condensate trap
  • Solid bottom included
  • Compatible with single or two stage thermostats. For optimal performance a two stage thermostat is recommended.
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard

  • Item#:
    FF100215LT96M
    Manufacturer Item:
    FF100215LT96M
    Manufacturer:
    FUJITSU
  • Features
  • 92% residential gas furnace CSA certified
  • 4 way multi-poise design
  • 7-Segment LED all units
  • Direct Spark Ignition for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for easy system set up
  • Self priming condensate trap
  • Solid bottom included
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193
  • Item#:
    FF100215TS92M
    Manufacturer Item:
    FF100215TS92M
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34" cabinet ideal for space constrained installations
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Insulated blower compartment
  • Constant Torque electrically commutated motor

  • Item#:
    FF100215TS80D
    Manufacturer Item:
    FF100215TS80D
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability
  • Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34" cabinet ideal for space constrained installations
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Constant Torque electrically commutated motor
  • Item#:
    FF100215CS80M
    Manufacturer Item:
    FF100215CS80M
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability
  • Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34" cabinet ideal for space constrained installations
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Constant Torque electrically commutated motor
  • Item#:
    FF100215CS80D
    Manufacturer Item:
    FF100215CS80D
    Manufacturer:
    FUJITSU
    |◀ 373 - 384 of 443 ▶|
    View: