Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Bosch Inducer Motor 87182261850 Combustion Fan RG130,57,1000,

Flow Rate

• Atomizing nozzles are available in a wide range of flow rates, all but eliminating the need for specially calibrated nozzles. Between 1.00 GPH and 2.00 GPH, for example, seven different flow rates are available. Generally, with hot water and warm air heat, the smallest firing rate that will adequately heat the house on the coldest day is the proper size to use and the most economical. Short on-cycles result in low efficiency. Another guideline is to select the flow rate that provides a reasonable stack temperature regardless of the connected load. (According to the New England Fuel Institute, aim for a stack temperature of 400°F or lower on matched packaged units or 500°F or lower on conversion burners.) If the boiler or furnace is undersized for the load, it may be necessary to fire for the load and ignore the efficiency

Spray Angle

• Spray angles are available from 30° through 90° in most nozzle sizes to meet the requirements of a wide variety of burner air patterns and combustion chambers. Usually it is desirable to fit the spray angle to the air pattern of the burner. In todays flame retention burner, it is possible to fire more than one spray angle with good results. Generally, round or square combustion chambers should be fired with 70° to 90° nozzles. Long, narrow chambers usually require 30° to 60° spray angles.

Burner Air Patterns

• Burner air patterns are much like nozzle spray patterns in that they fall into the same general classifications, either hollow or solid. As you would expect, a burner with a hollow air pattern generally requires a hollow cone fuel nozzle. A burner with a solid air pattern will give highest efficiency with a solid cone nozzle, but the flame will probably be longer

ICM Controls ICM2801 Furnace Control Board, 98 - 132 VAC , 5 amp at 120 VAC Replaces Part #:'s : 031-01910-000 | 031-01932-001 | 031-0932-002

Multi-position design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wider range of applications thancompetitive packaged air handler lines

Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes

Dual circuit can be field modified for use on single circuit condensers

Cooling coils with mechanically bonded fins provide peak heat transfer

Optional 2-speed indoor fan with VFD controller

Standard factory-installed thermostatic expansion valve (TXV) with removable power element

Easy maintenance - removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24-volt terminal block for control wiring connection

Hot water coil, steam coil, and electric heat accessories are available

Ultravation maximizes germicidal performance, safety and economy. Our patented T3 (Thermal Transfer Technology) UV optimized lamps are specially designed to deliver the highest possible level of germicidal UV by protecting the lamp in a quartz glass sleeve. Our integrated UV lamp systems use Philips Sterilamp Compact-Twin UV lamps that provide high levels of UV intensity because of their"U" shape - achieving performance levels of lamps twice as long. Either way, with Ultravation UV air treatment, you will have optimal effectiveness in germicidal performance.

T3 Quartz enclosed
• Upto 9000 hr average life
  

Ledlenser F1R LED Flashlight, Lithium-Ion, Frozen Black

Advance focus system
• The rechargeable lithium-ion battery supports this high power LED for 3 hr on high along with integrated roll protection, interchangeable glass breaking ring
• IPx8 waterproof housing, and a convenient battery charging station
• The F1R brings a new standard in compact flashlights
• Power high light output for every situation
• Mid power medium light output for every situation
• Low power economical light for long battery life, glare free reading and working
• Hard anodized coating
• 5 years warranty
• 7 hr recharge time
• 3 hr battery burn time
  

Sid Harvey T397-316 Black Nylon Cable Tie, 7-1/2" L

Heavy-duty construction
• Weather resistant and self locking
  

Honeywell 50022893-001 Premier White Cover Plate, 7-3/8" W x 5-3/4" H

Mitco T397-56S Insulated Solderless Terminals Female Disconnect 16-14 Wire Size 1/4"

Larkin offers one of the broadest and most innovative product lines on the market. This uniquely qualifies Larkin to meet the needs of foodservice applications, as well as mission critical applications such as data centers and biomedical labs. The Larkin product line includes distinctive white unit coolers, condensers, condensing units and electronic controls. Every unit is rigorously tested for quality and performance, earning Larkin a reputation for delivering the highest-performing refrigeration products for the demanding needs of pristine environments

Dongan Electric T22N Transformer 1 Pole 120/10,000 KVA,

Diversitech 710-003 Duct Strap, 100 feet Roll L x 1-1/2" W, Metal, Galvanized duct strap in a convenient cardboard dispenser is not only easy to drill or nail, but also solid strapping. Plenum rated.,