Sid Harvey 650-20 High Temperature Round Thermorope, for Boilers and,
,

Sid Harvey 650-16

Sid Harvey 650-21 Round High Temperature Probe, 25 feet Length x 1/2 Inch Diameter

• Safe, non-asbestos
• Heat resistant to 1000 deg F

Sid Harvey Item #:650-21,
,

Sid Harvey 650-20

Sid Harvey 650-24 Round High Temperature Probe, 25 feet Length x 3/4 Inch Diameter

• Safe, non-asbestos
• Heat resistant to 1000 deg F

,
,

Sid Harvey 650-22

Lynn 650-14 Round Thermorope 1/4" x 25' 1000 Degrees

Lynn Products 650-13

Sid Harvey 650-15 High Temperature Round Thermorope for Boilers, Furnace,
,

Sid Harvey 650-105

Sid Harvey 650-16 Round High Temperature Probe, 25 feet Length x 3/8 Inch Diameter

• Safe, non-asbestos
• Heat resistant to 1000 deg F

Sid Harvey Item #:650-16: Replaces Part #:'s : L37-662,
,

Sid Harvey 650-15

Lynn 9500LY Soft Ceramic Fiber Kaowool Strip, 150" L x 2" W x 1" T

• Soft ceramic fiber blanket strips commonly used as gasket material
• Bagged and labeled for individual re-sale

Sid Harvey Item #:633-90: Replaces Part #:'s : SIDS633-90,
,

Lynn Products 624-20

Lynn 119 Rigid Ceramic Fiber Kaowool Board, 2 x 2 x 1"

• Withstands temperatures up to 23 deg F
• Easily cut with a knife or hacksaw and can be drilled

Sid Harvey Item #:633-95: Replaces Part #:'s : L86-173,
,

Lynn Products 633-94

Lynn 9505 Soft Ceramic Fiber Kaowool Strip, 240" L x 1" W x 1/4" T

• Soft ceramic fiber blanket strips commonly used as gasket material
• Bagged and labeled for individual re-sale

Sid Harvey Item #:633-91: Replaces Part #:'s : 2G439,
,

Lynn Products 633-90

Lynn 122 Rigid Ceramic Fiber Kaowool Board, 15 x 24 x 3/4"

• Withstands temperatures up to 23 deg F
• Easily cut with a knife or hacksaw and can be drilled

Sid Harvey Item #:633-94: Replaces Part #:'s : 2M843,
,

Lynn Products 633-91

ICM Controls ICM175 Second Knob Adjustable Bypass Timer, 18 - 240 VAC , 1.5 amp, 10 amp Inrush, 40 milli-amp Holding, 10 - 1000 sec Knob Adjustable

• Designed to bypass a low pressure switch or other device during start-up
• Key component for"winter" start kits
• Helps to reduce nuisance lockouts
• Universal AC VAC age operation
• 10 - 1000 sec knob-adjustable time delays
• Epoxy-encapsulated circuitry

,
,

ICM Controls ICM150

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model.,

,

Roth 2335003721