|◀ ◀ 5593 - 5604 of 6114 ▶ ▶|
View:

Baseboard Panel Track Outside Corner 45 Degrees KOC Series

Embassy Industries KOC-45 Outside Corner 45 Degrees KOC Series

Embassy Industries KOC-45

Item#:
KOC-45
Manufacturer Item:
12275445
Manufacturer:
EMBASSY INDUSTRIES
 
Panel-Track_Broc

Air Handler Vert/Horiz 20 Ton 208/230/3 72" L x 59-1/2" W x 34-1/2" H

  • CABINETUnit cabinet should be constructed of galvanized, pre-painted steel.
  • MOTORInherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2" [.498 kPa] External static pressure.
  • LOW PROFILEAllows for horizontal installation in most standard drop ceiling applications, and the movement of units through most standard doorways for addition or replacement work.
  • THERMAL EXPANSION VALVESStandard all models.
  • FILTERSOne inch [25 mm] throwaway filters are standard, but filter racks are designed to accept either one inch [25 mm] or two inch [51 mm] filters.
  • EVAPORATOR COILTwo circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.
  • REFRIGERANT CONNECTIONSField piping connections are made through a fixed post between two side access panels on either side of the unit. Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete. Units may be used with two straight cool condens ing units or single circuit manifolded in the field using the copper fittings shipped with each unit. The RHGN Air Handler has not been tested, rated or certified to operate with dual residential remote heat pumps.
  • DRAIN PANThe galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations. Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions.
  • SERVICE ACCESSTwo removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters.
  • HORIZONTAL OR VERTICALAll models are designed for either application and can be installed in either position as supplied from the factory.
  • TESTINGAll units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.

    Fujitsu RHGL-240ZK

    • Item#:
    RHGL-240ZK
    Manufacturer Item:
    RHGL-240ZK
    Manufacturer:
    FUJITSU(UNITARY)
     
    RHGL-240ZK_Spec

    Tee No Crimp Galvanized 12" x 12" x 12" 26 Gauge

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge



    Southwark RX7012


    Southwark RX7012

    Item#:
    RX7012
    Manufacturer Item:
    106012
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    90 Degree Adjustable Galvanized 26 Gauge 12"

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge



    Southwark RX531226


    Southwark RX531226

    Item#:
    RX531226
    Manufacturer Item:
    901226
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    Round Snaplock Pipe 18" x 60" Galvanized 26 Gauge

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge



    Southwark SL601826


    Southwark SL601826

    Item#:
    SL601826
    Manufacturer Item:
    SL601826
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    Spiral 90 Degree Elbow Adjustable 26 Gauge 6"

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.Southwark SP90626 Spiral 90 Degree Elbow Adjustable 26 Gauge 6",



    SP90626


    SP90626

    Item#:
    SP90626
    Manufacturer Item:
    SP90626
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    Round Snaplock Pipe Galvanized 26 Gauge 120" x 6"

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


    Southwark SP10626


    Southwark SP10626

    Item#:
    SP10626
    Manufacturer Item:
    10626
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    Round Snaplock Pipe Galvanized 16" x 120" 24 Gauge

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


    Southwark SP101624


    Southwark SP101624

    Item#:
    SP101624
    Manufacturer Item:
    SP101624
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    Round Snaplock Pipe Galvanized 26 Gauge 120" x 10"

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


    Southwark SP101026


    Southwark SP101026

    Item#:
    SP101026
    Manufacturer Item:
    SP101026
    Manufacturer:
    SOUTHWARK METAL MFG
     
    Southwark_Broc

    Round Snaplock Pipe Galvanized 26 Gauge 120" x 14"

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


    Southwark SP101426


    Southwark SP101426

    Item#:
    SP101426
    Manufacturer Item:
    SP101426
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc

    Gas Valve 3/4" x 3/4" 24 VAC >>LIMITED STOCK CLEARANCE ITEM<<

    Trane VAL8853 Gas Valve 3/4" x 3/4" 24 VAC

    Trane Heating Parts VAL8853

    Item#:
    VAL8853
    Manufacturer Item:
    VAL8853
    Manufacturer:
    DELAWARE TRANE PARTS CENTER

    90 Degree Adjustable Elbow 20" Galvanized 26 Gauge

    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge
    Item#:
    902026
    Manufacturer Item:
    RX532026
    Manufacturer:
    SMOKE PIPE & SHEET METAL
     
    Southwark_Broc
    |◀ ◀ 5593 - 5604 of 6114 ▶ ▶|
    View: