Bell & Gossett B138 F3 Brass Dual Unit Valve 1/2" NPT 30 PSI Relief 12 PSI Reducing
Reducing valves fill the system to a preset pressure for optimum performance. Combination dual unit valves include pressure reducing valve and relief valve. Both Valves are equipped with an EPDM diaphragm. The diaphragm operated relief valve operates with a low differential between opening and closing pressures. The diaphragm operated pressure reducing valve is equipped with an inlet strainer and built-in low inlet pressure check valve.

• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Relief and FB-38 pressure reducing component valves

Sid Harvey Item #:B138: Replaces Part #:'s : 36861,
,

Bell & Gossett B138

Bell & Gossett B138

Watts Regulators series 174A boiler pressure relief valves are used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet drain connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 174A resists corrosive water conditions, sticking and freezing and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

Watts Water B145

Watts Water B145

Mcdonnell & Miller No. 2 Auto Reset Low Water Cutoff Alarm Switch, 120 - 240 VAC at 60 Hz

McDonnell & Miller B115

Bell & Gossett 100NFI In-Line Circulator Pump, 1/12 HP, 115 VAC , 0 - 33 gpm

• The shaft and seal are housed in an assembly that can be easily repaired or replaced
• This pump's motor design, coupled with its overall hydraulic performance, allows the Bell & Gossett series 100 to overcome system-related noise caused by valves, fittings or piping
• Resilient mounting provides quiet, dependable service with minimum annual lubrication
• Features a precision ground pump shaft is oversized to provide large bearing surfaces and a hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
• Carbon steel shaft

Sid Harvey Item #:B51: Replaces Part #:'s : 3406,
,

Bell & Gossett B51

Bell & Gossett B51

Bell & Gossett B-38 Cast Brass Pressure Reducing Valve, 1/2", NPT, 10 - 25 psig

• Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Brass body construction is highly resistant to corrosion-ideal for water systems
• Reducing valves protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• They are factory set at specified limits although adjustment is easily made
• Construction - cast brass body, with special insert diaphragm, EPDM check valve, brass seat, brass with EPDM insert stem, brass valve plate, stainer and strainer nut wetted parts and steel non-wetted parts

Sid Harvey Item #:B138-8A: Replaces Part #:'s : B138-7R,
,

Bell & Gossett B138-8A

Bell & Gossett B138-8A

Mcdonnell & Miller 309100 Manual Reset Low Water Cutoff Switch, DPST

McDonnell & Miller B122

SA37-30 Water Feeder Float Assembly for 47 47-2 247 and 247-2 Controls

B123-5

Strainer Basket Assembly for 47 51 51-2 247 247-2 847 and 851S Make-Up Water Feeders and Mechanical Water Feeder/Low Water Cut-Offs

Tetraseal O-Ring included



McDonnell & Miller B123-4

Jason Industrial UniMatch Multi-Plus B124 Polyester Cord Classical V-Belt, Jason/Megadyne's Multi-Plus V-belts are designed to perform in tandem in multiple V-belt drives, maintaining drive efficiency and classical belt performance. Multi-Plus V-belts are always matched, easy to install and maintain. Jason Multi-Plus V-belts come in a complete range of sizes, are anti-static and offer oil and heat resistance meeting RMA requirements.,

B124

Bell & Gossett B50-50 Circulator Pump Booster 1/20 HP,
,

B50-50

B50-50

Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.

• Maintenance free
• No venting required
• Vent head is designed to stay dry, dirt and leak resistant
• 1/2" male thread port for pressure testing or remote venting of unwanted gases
• Quiet operation
• Increased component life
• Reduced oxygen based corrosion and pump cavitation
• The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
• The air chamber has been designed so that dirt cannot reach the valve
• Large capacity collection chamber reduces the need for frequent draining
• Drain valve for flushing out the dirt
• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring
• Copper coalescing medium

,
,

Spirotherm B156-24

Spirotherm B156-24

Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.

• Maintenance free
• No venting required
• Vent head is designed to stay dry, dirt and leak resistant
• 1/2" male thread port for pressure testing or remote venting of unwanted gases
• Quiet operation
• Increased component life
• Reduced oxygen based corrosion and pump cavitation
• The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
• The air chamber has been designed so that dirt cannot reach the valve
• Large capacity collection chamber reduces the need for frequent draining
• Drain valve for flushing out the dirt
• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring
• Copper coalescing medium

Sid Harvey Item #:B156-22: Replaces Part #:'s : L38-344,
,

Spirotherm B156-22

Spirotherm B156-22