Weil-McLain Heating Parts 413300002 Jacket CarTon SL GB6,13,14

Weil-McLain Heating Parts 413300002

A/C Re-New has been successfully used for many years to improve the performance of air conditioning systems. A/C Re-New provides significant savings in energy use, quiets noisy systems, extends the life of systems, and resolves sticking reversing valves and TEVs due to friction. It is a lubricant that blends with the systems oil, lasting for the life of the equipment, or until the oil is changed. In recent years, A/C Re-New has been successfully used to aid in existing oil migration when retrofitting an R-22 air conditioning system with a near drop-in refrigerant; examples include R-427A and R-407C and others. A/C Re-New not only helps with oil return at retrofit, but also comprehensively renews the air conditioner by reducing friction in the compressor (lowers amp draw), quiets the system and can aid in sticking flow control valves because of friction due to years of service.,
,

Nu-Calgon 4057-56

Bio-fresh CD is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.

• A concentrated, ready-to-use bacteriostat that is a fungistat and deodorant
• EPA registered for application in HVACR systems no. 9804-3-65516
• Can be sprayed in occupied areas
• Kills odors and controls bacteria
• Eliminates odors where they exist

Sid Harvey Item #:4126-34: Replaces Part #:'s : 4728,
,

Nu-Calgon 4126-34

Dunkirk Heating Parts 438-000-13 Hot Surface Ignitor

Dunkirk Heating Parts 438-000-13

Viessmann Z015259 Hydro Level Control for VR1-22, VR1-27 and VR1-33 Boilers

Hydrolevel 48-202

Hydrolevel Parts 48-201 Electro Well

Hydrolevel 48-201

Baked-On Powder Coated Hydronic Air Handler with TXV Metering

• Multi function micro-processor circuit board
• Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
• Manual air vent on hot water coil
• Blower door shut-off switch
• Slide out hot water coil for easier service
• 2-speed fan operation
• Convertible horizontal drain pan
• PisTon type metering device (standard)
• Copper tube heating and cooling coils
• Compatible with all major brands of split condensing units and heat pumps
• Primary and secondary condensate drain connections
• Factory installed filter drier
• 1" filter easily accessible
• Without pump

  First Company 48HCXB-HW-TXV410

Watts Water 488-11 Ball Valve

Watts Water 488-11

Armstrong/Ducane/Lennox Parts 56W61 Silicon Nitride 2-Pin Plug Hot Surface Igniter, 120 volt

49W66

STANDARD FEATURES

3-way airflow (except 60/61HCX)

Factory installed horizontal drain pan

Completely prewired with 0-25kW electric heat (except 0kW models)

Compatible with major brands of split condensing units and heat pumps (Contact factory for correct match with outdoor unit)

Piston-type metering device or factory or field installed TXV (non-bleed type) on cooling coil

Factory installed filter

Attractive baked on finish

Copper tube cooling coils

Primary and secondary drain connections on cooling coil

Fully insulated and painted galvanized steel cabinet

Factory installed disconnect switch (over 10kW models)

First Company 48HCXW3X10AVB00AAF

Taco 49-100C-2 Automatic Air Separator, 1", Sweat, 150 psig, 25 - 240 deg F, 24 Cv, 5 fps Maximum, 20 kilo-VAC, Brass, 4-13/16" W x 6-3/4" H

• 20 kilo-VAC rating
• Removes unwanted air from closed loop heating and cooling systems to help increase efficiency and eliminate noise
• Water or water/glycol media
• Features bi-directional flow, patented pall ring design
• Minimal pressure loss, vent can be closed
• Large surface contact area, protective vent plate
• Rugged dependability, maximum air removal
• Convenient expansion tank connection tapping, bi-directional flow
• Stainless steel pall rings
• Stainless steel, EPDM, viTon, brass and engineered plastics venting unit components

,

,

Taco 49-100C-2