S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Fujitsu FO6016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 4 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire
Fujitsu FO6016CSJNA
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
- Variable speed heat pump with observer communicating control system
- Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
- Electronic expansion valve (EXV) for precise heating control
- High pressure switch
- Suction pressure transducer
- Pressure equalizer valve for easy starting
- Compressor discharge temperature sensor, coil temperature sensor
- Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
- Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
- Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
- High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
- Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
- Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
- High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
- Coated inlet grille with 3/8 Inch grille spacing for extra protection
- Corner posts for extra strength and style
- 10 years limited parts warranty
- 5 years parts limited warranty
- Coil guard grille
- Sales code
- Smart comfort deluxe 18 with SmartSense technology
TVH837GKA
Item#:
TVH837GKA
Manufacturer Item:
TVH837GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
- Variable speed heat pump with observer communicating control system
- Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
- Electronic expansion valve (EXV) for precise heating control
- High pressure switch
- Suction pressure transducer
- Pressure equalizer valve for easy starting
- Compressor discharge temperature sensor, coil temperature sensor
- Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
- Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
- Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
- High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
- Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
- Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
- High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
- Coated inlet grille with 3/8 Inch grille spacing for extra protection
- Corner posts for extra strength and style
- 10 years limited parts warranty
- 5 years parts limited warranty
- Coil guard grille
- Sales code
- Smart comfort deluxe 18 with SmartSense technology
TVH836GKA
Item#:
TVH836GKA
Manufacturer Item:
TVH836GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
- Variable speed heat pump with observer communicating control system
- Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
- Electronic expansion valve (EXV) for precise heating control
- High pressure switch
- Suction pressure transducer
- Pressure equalizer valve for easy starting
- Compressor discharge temperature sensor, coil temperature sensor
- Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
- Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
- Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
- High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
- Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
- Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
- High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
- Coated inlet grille with 3/8 Inch grille spacing for extra protection
- Corner posts for extra strength and style
- 10 years limited parts warranty
- 5 years parts limited warranty
- Coil guard grille
- Sales code
- Smart comfort deluxe 18 with SmartSense technology
TVH825GKA
Item#:
TVH825GKA
Manufacturer Item:
TVH825GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FO3617CTJCBA A/C Condensing Unit Non-Communicating No Pressure Switch 17 SEER 208/230/1 R410A 3 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire
FO3617CTJCBA
Item#:
FO3617CTJCBA
Manufacturer Item:
FO3617CTJCBA
Manufacturer:
FUJITSU(UNITARY)
Fujitsu FO3616CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 3 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
,
Fujitsu FO3016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 2-1/2 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire
FUJITSU FO3016CSJNA
FO2417CTJCBA
Item#:
FO2417CTJCBA
Manufacturer Item:
FO2417CTJCBA
Manufacturer:
FUJITSU(UNITARY)
Fujitsu FO1816CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 1-1/2 Ton
- New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
- Better coat paint system for a long lasting professional finish.
- Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
- Modern cabinet aesthetics increased curb appeal with visually appealing design.
- Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
- Optimized fan orifice optimizes airflow and reduces unit sound.
- Rust resistant screws confirmed through 1500-hour salt spray testing.
- 3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
- 15" wide, industry leading corner service access makes repairs easier and faster.
- External gauge port access allows easy connection of low-loss gauge ports.
- Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
- Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
- Service trays hold fasteners or caps during service calls.
- QR code provides technical information on demand for faster service calls.
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire
Fujitsu FO1816CSJNA
INTERNATIONAL COMFORT PRODUCTS FEM4P4200AL
Item#:
FEM4P4200AL
Manufacturer Item:
FEM4P4200AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
INTERNATIONAL COMFORT PRODUCTS FEM4P3000AL
Item#:
FEM4P3000AL
Manufacturer Item:
FEM4P3000AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Gray Pre-Painted Galvanized Cabinet Sheet Metal Cabinet Upflow/Downflow/Horizontal Multi-Position Type A Evaporator Fan Coil with EC Motor and TXV Metering,
- Communicating, self configuring when used with observer communicating wall control
- Smart diagnostic for easier troubleshooting
- Bi-flow hard-shutoff R-410A TXV metering device
- HUD approved for manufactured housing
- Primary and secondary brass drain connections
- Energy efficient variable speed ECM motor
- Ultra - low power consumption during fan only operation
- High duct static capability
- Pre-painted Galvanized sheet metal cabinet insulation with vapor barrier
- Cabinet construction designed to prevent cabinet sweating
- Meets requirements of a 2% cabinet leakage rate when tested at 1" WC of static pressure
- Modular cabinet on 5 Ton model
- Multiple electrical entry for application flexibility
- Low VAC age terminal strip
- Easy plug connection provided for quick installation of accessory heater packages
- Factory supplied washable filter easily removed - no tools required
International Comfort Products FCM4X2400AL
Item#:
FCM4X2400AL
Manufacturer Item:
FCM4X2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS