29.6 Gallon DHW

1.6 Gallon Boiler, 10 gpm

Inspection opening provides easy access to clean and inspect tank

2" of dense foam insulation, CFC free and environmentally safe

Adjustable leveling legs

Low off cycle losses

Pressure relief valve provided

Tank and coil are 100% air pressure/water tested

Factory installed sacrificial magnesium anode rod

,

GL-32-W

GL-32-W

Heat-Flo offers quality indirect water heating systems that provide abundant hot water, low operating cost, and long life. Hot water from any heating boiler is circulated through the coil inside to heat all the water in the tank. Simply add another zone to your existing heating boiler.

• Large, smooth-wall coils deliver full output for years
• No finned tubing to collect lime and sediment
• Includes over 2" of insulation and a flexible thermoplastic jacket that will not dent or corrode, and less than 10/hr heat loss
• All connections are on top on the standard units for a neat, clean installation
• Brass drain and relief valves are factory installed
• Standard Honeywell control and well for reliability and easy service
• Low operating cost

,
,

Heat-Flo Water Heaters HF-60

Heat-Flo Water Heaters HF-60

Heat-Flo offers quality indirect water heating systems that provide abundant hot water, low operating cost, and long life. Hot water from any heating boiler is circulated through the coil inside to heat all the water in the tank. Simply add another zone to your existing heating boiler.

• Large, smooth-wall coils deliver full output for years
• No finned tubing to collect lime and sediment
• Includes over 2" of insulation and a flexible thermoplastic jacket that will not dent or corrode, and less than 10/hr heat loss
• All connections are on top on the standard units for a neat, clean installation
• Brass drain and relief valves are factory installed
• Standard Honeywell control and well for reliability and easy service
• Low operating cost

,
,

Heat-Flo Water Heaters HF-50

Heat-Flo Water Heaters HF-50

Heat-flo offers quality indirect water heating systems that provide abundant hot water, low operating cost and long life. Hot water from any heating boiler is circulated through the coil inside to heat all the water in the tank. Simply add another zone to your existing heating boiler.

• Large, smooth-wall coils deliver full output for years
• No finned tubing to collect lime and sediment
• Includes over 2" of insulation and a flexible thermoplastic jacket that will not dent or corrode, and less than 10 per hr heat loss
• All connections are on top on the standard units for a neat, clean installation
• Brass drain and relief valves are factory installed
• Standard Honeywell control and well for reliability and easy service
• Low operating cost

,

,

Heat-Flo Water Heaters HF-40

Heat-Flo Water Heaters HF-40

Diversified Heat Transfer TX-80 Indirect Water Heater 80 Gallon Stainless Steel
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,

Diversified Heat Transfer TX-80

Diversified Heat Transfer TX-80

Diversified Heat Transfer TX-50 Indirect Water Heater 50Gallon Stainless Steel
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,

diversified heat transfer tx-50

diversified heat transfer tx-50

Diversified Heat Transfer TX-40 Indirect Water Heater 42Gallon Stainless Steel
PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.
REDUCED ENERGY COST
The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.
REDUCED MAINTENANCE COST
Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.
PATENTED AND ENVIRONMENTALLY FRIENDLY
All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.
LEADING WELDING TECHNOLOGY
The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,
,

diversified heat transfer tx-40

diversified heat transfer tx-40

Diversified Heat Transfer Techtanium TT-40 Powder Coat Painted Steel Jacket Indirect Water Heater, 40 Gallon, 10 gpm, 120000 BTU

• Extra large heat exchanger surface area - high recovery and continuous flow for abundant hot water
• Titanium glass lined - high elasticity that adapts to expansion and contraction for added strength and durability, provides a resistant layer of protection against corrosion
• Exterior steel jacket with powder coat paint - durable and solid for life lasting exterior appearance, polyurethane foam (PUF) insulation reduces standby heat loss
• Side connections for TT series
• Works with any hydronic heat source for domestic hot water
• Environmentally friendly polyurethane insulation limits heat loss and is both CFC and HFC- free
• Polyurethane foam for outstanding insulation and reduced power consumption- CFC free
• All models supplied magnesium anti-corrosion anodes
• TT models - (2) magnesium anti-corrosion anodes
• Environmentally and Installer friendly
• Includes - Honeywell L4006A aquastat, immersion well
• 7 years residential, 3 years commercial warranty

,
,

diversified heat transfer tt-40

diversified heat transfer tt-40

Crown Boiler Mega-Stor is the first indirect water heater to have its performance independently certified to specifications by the hydronics institute. This independent testing will assure you of accurate ratings. Mega-Stor is indirectly heated for efficiency. The boiler that heats your home or building provides more energy, while consuming fuel more efficiently, than direct-fired domestic water heaters. So Mega-Stor saves on fuel costs by using hot water from your boiler to heat water for your showers.

• The Mega-Stor is a stainless-steel indirect water heater which provides abundant domestic hot water utilizing energy provided by your boiler
• With a stainless steel, smooth surface coil that transfers heat throughout the tank, the Mega-Stor is capable of recovery rates well in excess of a typical gas, electric or oil water heater
• The 2" thick layer of polystyrene foam insulation keeps the water in your Mega-Stor hot for hours during stand-by periods

Sid Harvey Item #:MS-40: Replaces Part #:'s : L96-356
,
,

MS-40

MS-40

Crown Boiler Mega-Stor II MS2-075 444 Stainless Steel Indirect Water The mega-stor II is a stainless-steel, indirect water heater that provides abundant domestic hot water powered by a variety of efficient Velocity boilers to fit every application. Available in several sizes, it has a rugged design with a coated steel jacket and heavy-duty polymer top and bottom to resist cracks and abrasions. This product is robotically welded, hydrostatically tested and passivated for maximum corrosion resistance.,
,

crown boiler ms2-075

crown boiler ms2-075