Brand Name
Type
Fuel Type
Orifice
Voltage
Lead Length
Tip Direction
Mount
Tip Type
|◀ 1 - 12 of 126 ▶|
View:
Supco IG402K Silicon Carbide Flat Hot Surface Furnace Igniter, 120 VAC, 3.5 - 5 amp at 132 VAC Maximum, 24 Inch L Lead
  • Universal kit that replaces all Robertshaw igniters part numbers to minimize inventory
  • Superior gas lighting ability
  • Lower power consumption
  • 18 ga copper high temperature fiberglass insulated lead wires
  • Offer an efficient, stronger, reliable design
  • Faster time to temperature response
  • More robust in transit
  • Higher resistance to oxidation
  • Longer usable life
  • Time to temperature (1800 deg F) less than 17 sec at 120 VAC
  • 40 - 100 ohm at 75 plus or minus 10 deg F cold resistance
  • Includes brackets, hardware
Sid Harvey Item #:IG402K: Replaces Part #:'s : B144676P01
Item#:
IG402K
Manufacturer Item:
IG402K
Manufacturer:
SEALED UNIT PARTS CO, INC
Honeywell Q3400A1024 Hot Surface Igniter Flame Rod Assembly, 30 Inch L Lead
Sid Harvey Item #:Q3400A1024: Replaces Part #:'s : MHQ3400A1024 | 42640-001 | B14001-12 | MHQ3400A1016 | GMB14001-12 | MHQ3400A1032 | Q3400A1032 | BW23340876-02 | 2334087602 | 183267 | DC20276501 | 20276501 | 70L55 | MHQ3400A1040 | Q3400A1040 | 184047 | CARQ3400A1024 | 1009524 | 1008731 | 1172533 |
Item#:
Q3400A1024
Manufacturer Item:
Q3400A1024
Manufacturer:
HONEYWELL
Supco IG403K Silicon Carbide Hot Surface Flat Universal Igniter, 120 volt, 3.5 - 5 amp
  • Universal replacement minimizes inventory
  • Superior gas lighting ability
  • Lower power consumption and 18 ga copper high temperature fiberglass insulated lead wires
  • Supco flat igniters offer an efficient, stronger, reliable hot surface silicon carbide design
  • More robust in transit and higher resistance to oxidation
  • Longer usable life
  • Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters
Sid Harvey Item #:IG403K: Replaces Part #:'s : IGN26
Item#:
IG403K
Manufacturer Item:
IG403K
Manufacturer:
SEALED UNIT PARTS CO, INC
White Rodgers Hotrod 21D64-2 Silicon Nitride Universal Hot Surface Igniter Kit, 102 - 132 VAC, 3 amp at 132 VAC, 15-1/2 Inch L Lead
  • Robust igniter design - for longer life and fewer call-backs
  • Universal bracket fits most furnaces - reduces inventory
  • Easy to install
  • Durable, reliable and universal
  • No power module needed
  • Timing rating 17 sec minimum
  • 5 years warranty
  • Includes (1) universal mounting bracket, screw mounting adapter bracket, ceramic wire nuts, updated manufacturer cross-reference, nitride upgrade furnace label, instruction booklet
Sid Harvey Item #:21D64-2: Replaces Part #:'s : 24290
Item#:
21D64-2
Manufacturer Item:
21D64-2
Manufacturer:
WHITE-RODGERS DIV EMERSON
White Rodgers 767A-378 Silicon Carbide Hot Surface Igniter, 120 VAC, 5-1/8 Inch L Lead
  • Multiple mounting styles
  • Highly reliable ignition source
  • Electrical connector matches AMANA #20165702
Item#:
767A-378
Manufacturer Item:
767A-378
Manufacturer:
WHITE-RODGERS DIV EMERSON
Honeywell Q314U1001/U Natural Gas/LP Universal Pilot Burner for Q309, Q340, Q390 Thermocouples or Q313 Thermopiles
  • Non primary aerated, insert orifice type pilot burner for main burner ignition
  • Variety of mounting brackets available
  • Variety of tip directions to provide desired flame pattern
  • Adjustable left, right and centre direction tip
  • Interchangeable, color coded orifices can be ordered to convert between natural and LP gas
Item#:
Q314U1001
Manufacturer Item:
Q314U1001
Manufacturer:
HONEYWELL
Honeywell 390686-1 LP Gas Pilot Orifice for Q314, Q345 and Q350 Pilot Burners
Sid Harvey Item #:G525-44: Replaces Part #:'s : L44-329
Item#:
G525-44
Manufacturer Item:
390686-1
Manufacturer:
HONEYWELL
Honeywell Q314A4586/U 1-Front Direct Tip Pilot Burner with Orifice for Q309, Q340, Q390 Thermocouples or Q313 Thermopiles, Natural Gas, LP
  • Variety of tip directions to provide desired flame pattern
  • Interchangeable, color coded orifices can be ordered to convert between natural and LP gas
  • Non primary aerated, insert orifice type pilot burner for main burner ignition
  • 0.65 Inch compression fitting length
  • 0.018 Inch BCR-18 or 0.010 Inch BBR-10 packed orifice
  • Target tip style
  • F front direction of front tip
  • Special mounting bracket with screws to convert B bracket to A bracket
Sid Harvey Item #:Q314A4586: Replaces Part #:'s : MHQ314A4586 | 96959 | 14662098 | 14662053 | 3924491
Item#:
Q314A4586
Manufacturer Item:
Q314A4586
Manufacturer:
HONEYWELL
Supco SIG102 Silicon Carbide Hot Surface Round Igniter, 120 volt, 4 amp
  • Exact replacement hot surface igniters with superior gas lighting ability
  • Lower power consumption and 18 ga copper high temperature fiberglass insulated lead wires
  • Supco round igniters offer an efficient, stronger, reliable hot surface silicon carbide design
  • Faster time to temperature response, stronger more durable design and more robust in transit
  • Higher resistance to oxidation and longer usable life
  • Easy installation
Sid Harvey Item #:SIG102: Replaces Part #:'s : 8G0620
Item#:
SIG102
Manufacturer Item:
SIG102
Manufacturer:
SEALED UNIT PARTS CO, INC
Robertshaw Controls 41-412 Silicon Carbide Hot Surface Furnace Igniter, 120 VAC, 5-1/4 Inch L Lead
  • Made from high-purity recrystallized crystal which combines physical and thermal strength with stable electrical properties
  • Designed to reach ignition temperature within 17 sec
  • Have 18 ga nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
  • Manufactured with lead wires enclosed in a special high temperature fiberglass insulation providing electrical protection
  • C - ceramic block style
  • 271M factory part number
  • D - terminal connector type
  • 40 - 75 ohm
Sid Harvey Item #:G569-59: Replaces Part #:'s : B1401009
Item#:
G569-59
Manufacturer Item:
41-412
Manufacturer:
ROBERTSHAW CONTROLS CO.
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.
  • Made from high-purity recrystallized silicon carbide, (Crystar) which combines physical and thermal strength with stable electrical properties
  • Designed to reach ignition temperature with-in 17 sec
  • Have 18 ga nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
  • Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
  • Terminal connector is type C and ceramic block style is type B
  • Includes special mounting adaptors
Sid Harvey Item #:41-411: Replaces Part #:'s : 18514
Item#:
41-411
Manufacturer Item:
1120-100-1411
Manufacturer:
SID HARVEY INDUSTRIES INC.
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.
  • Made from high-purity recrystallized silicon carbide, (Crystar) which combines physical and thermal strength with stable electrical properties
  • Designed to reach ignition temperature with-in 17 sec
  • Have 18 ga nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
  • Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
  • Terminal connector is type D and ceramic block style is type C
  • Includes special mounting adaptors
Sid Harvey Item #:G569-48: Replaces Part #:'s : G569-42 | G569-44 | G569-52 | G569-54 | G569-56 | G569-58 | SIG1000
Item#:
G569-48
Manufacturer Item:
1120-100-1405
Manufacturer:
SID HARVEY INDUSTRIES INC.
|◀ 1 - 12 of 126 ▶|
View: