The URD series of round motorized dampers are a double layered blade design with an integrated poron sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and ThermoTuff drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1.5 in-WC. The UL listed MA-ND5 actuator is a 24 VAC three wire power open/power close type-rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA 1 rated housing. The MA-ND5 motor features bright green and red LED's which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for Min/Max blade position, that allows for field balancing of the full or minimum cfm flow, into a particular zone or area. The position LED's will illuminate regardless of the end stop positions.

EWC Controls SBD-8

The URD series of round motorized dampers are a double layered blade design with an integrated poron sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and ThermoTuff drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1.5 in-WC. The UL listed MA-ND5 actuator is a 24 VAC three wire power open/power close type-rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA 1 rated housing. The MA-ND5 motor features bright green and red LED's which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for Min/Max blade position, that allows for field balancing of the full or minimum cfm flow, into a particular zone or area. The position LED's will illuminate regardless of the end stop positions.

EWC Controls URD-14

The URD series of round motorized dampers are a double layered blade design with an integrated poron sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and ThermoTuff drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1.5 in-WC. The UL listed MA-ND5 actuator is a 24 VAC three wire power open/power close type-rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA 1 rated housing. The MA-ND5 motor features bright green and red LED's which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for Min/Max blade position, that allows for field balancing of the full or minimum cfm flow, into a particular zone or area. The position LED's will illuminate regardless of the end stop positions.

EWC Controls URD-5

The URD series of round motorized dampers are a double layered blade design with an integrated poron sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and ThermoTuff drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1.5 in-WC. The UL listed MA-ND5 actuator is a 24 VAC three wire power open/power close type-rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA 1 rated housing. The MA-ND5 motor features bright green and red LED's which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for Min/Max blade position, that allows for field balancing of the full or minimum cfm flow, into a particular zone or area. The position LED's will illuminate regardless of the end stop positions.

EWC Controls URD-4

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD12X12TZ

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD18X10

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD20X10TZ

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD16X10TZ

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD10X10TZ

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD24X8TZ

Starting with the development of the first zoning dampers and registers in the 1950s to today, with exclusive Plug & Play dampers  Zonefirst has led the way in excellence and continued innovation.
ZONEFIRST is the first company that successfully developed and marketed HVAC Zoning Systems back in the 1950s and is today a leading manufacturer of HVAC zone dampers and zoning systems. Several other major zoning companies are in business due to ZONEFIRST.
It was in the mid to late 1950s when Richard Foster developed the first automatic motorized dampers, registers and difusers that were thermostatically controlled. He marketed these products under the trade name Zone-A-Trol with another company when in 1964 he founded Trolex Corporation and the start of the well known trade name Trol-A-Temp. In 1999 the Trol-A-Temp brand was acquired by Honeywell.
Since that time, Trolex has continued to manufacture zone dampers for a number of OEMs. In 2004 Trolex re-entered the HVAC market as ZONE-A-TROL and later the ZONEFIRST tradename. This new name signifies the many firsts the company has developed in the HVAC industry. We were the first company to develop automatic dampers, registers, and diffusers for zoning, centralized zone controllers, the first zoning system to feature normally open dampers and the first to zone heat pumps in the early 1970s

Zone First ZDB0818

Outstanding Performance:
This damper was specifically designed with R8 insulation specification in mind to contribute to energy savings and help the system pass efficiency audits. Best of all, it helps eliminate hot and cold spots, the biggest cause of callbacks. The improved internal design creates a slower return that ensures a quiet operation.
Installation Made Easy
For fast, accurate installation with no callbacks, the TrueZONE Damper has you covered with a range of features that simplify installation in most applications:

Adjustable Range Stops  Easy to understand and set by utilizing a pushin lever. Theyre used to bleed air into the zones which helps lower pressure and reduce noise.

Push-In Terminals  The same easy wiring design used on TrueZONE Panels. No tools needed, has space for two wires.

Taping Flange  Lets you position insulation under it before sealing with foil tape.

Mechanical Position Indicator  Easy viewing through a clear window.

LED Indicator Lights  Red indicates the damper is closed and green indicates open (used in 3-wire applications)

Honeywell ZD8X24TZ