S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 4RAO
Item#:
4RP12
Manufacturer Item:
016105
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 4RP18
Item#:
4RP18
Manufacturer Item:
016104
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 7RP3
Item#:
7RWT
Manufacturer Item:
016417
Manufacturer:
HART & COOLEY, LLC.
InnoFlue Vent Systems are professional, reliable, environmentally sustainable and offer substantial labor savings due to reduced installation times.
Centrotherm Eco Systems ISRD0302
Item#:
ISRD0302
Manufacturer Item:
ISRD0302
Manufacturer:
CENTROTHERM ECO SYSTEMS
Hart & Cooley 10REA45 B-Vent 45 Degree Elbow 10" Natural Gas Aluminum
Hart & Cooley 8RWT
Item#:
10REA45
Manufacturer Item:
016604
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 12REA45
Item#:
12RS
Manufacturer Item:
016711
Manufacturer:
HART & COOLEY, LLC.
Z-Flex 2OILKTx0535 Stainless Steel Chimney Liner Kit 5" x 35'
Olympia Chimney SSSB9X9
Z-Flex Z-Vent 2SVEEWCF0390 AL29-4C Stainless Steel Single Wall 90 Degree
Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.,
Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.,
Z-Flex 2SVEEWCF0390
Item#:
2SVEEWCF0390
Manufacturer Item:
2SVEEWCF0390
Manufacturer:
Z-FLEX US INC
Z-Flex Z-Vent 2SVEPWCF0302 Single-Wall Pipe 3" x 24" Stainless Steel
- Gasketed connections
- Fusion welded pipe seams
- No sealant required, no cure time, or no call backs
- Air tight seam, smooth finish, better fit
- Metallic special gas vent cut to length on site (single wall version) saves time and lowers cost.
- Highest pressure rating in the industry greater than five time the industry standard,
Z-Flex 2SVEPWCF0302
Item#:
2SVEPWCF0302
Manufacturer Item:
2SVEPWF0302
Manufacturer:
Z-FLEX US INC
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 4RGS
Item#:
4RGS
Manufacturer Item:
557881
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 5TLC24 All-Flue Pipe 5" x 24"
Hart & Cooley 8TLCRS
Item#:
5TLC24
Manufacturer Item:
502004
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 6TLCEK30 All-Flue 6" Insulated 30° Elbow Kit
Hart & Cooley 6TLCEK15
Item#:
6TLCEK30
Manufacturer Item:
502044
Manufacturer:
HART & COOLEY, LLC.