PRODUCT DESCRIPTION: Streamline® XHP Copper-Iron Fittings for use in refrigeration applications. Available sizes ranging from 3/8 to 2-5/8 in outside diameter for continuous 130 BAR / 1885 PSI pressure ratings at 120°C / 250°F. MATERIAL: Streamline® XHP Copper-Iron Fittings shall be made from material in compliance with UNS C19400 grade of copper alloy. KEY SPECIFICATIONS: Streamline® XHP Copper-Iron Fittings are third party listed by UL for continuous operating pressure of 130 BAR / 1885 PSI at a continuous operating temperature of 120°C / 250°F. Streamline® XHP Fittings meet the dimensional requirements of ASME B16.22 or ASME B16.50. INSTALLATION:

Streamline® XHP material was developed for use with high-pressure refrigerants.

Compared to conventional pure

copper Cu-DHP (99.9% Cu; UNS C12200), Streamline® XHP material is a CuFe2P alloy (2.1-2.6% iron; UNS C19400).

This materials wettability is comparable to that of Cu-DHP.

Streamline® XHP Fittings are not subject to any restrictions for the selection of brazing alloy. Commonly used brazing filler metal types such as BCup Alloy (may contain 0% - 30% Silver  Ag) or Bag Alloy (may contain anywhere between 24% and 93% Silver  Ag) can be used. The brazing alloy chosen must be clarified with the brazing alloy supplier for each specific application. The selection of brazing alloy may depend on a few factors: applicable codes, OEM specifications, vibration, and operating temperatures. SPECIFICATION LANGUAGE:

Copper-Iron Tube shall conform to the requirements of ASTM B1018. Copper-Iron Fittings shall conform to the dimensional requirements of ASME B16.22 and ASME B16.50. Performance criteria of copper-iron tube and fittings shall conform to UL 207. a. Operating pressure: 130 BAR / 1885 PSI Max b. Temperature range: 120°C / 250°F Continuous c. Tube and fittings shall be listed to UL 207 d. Tubing shall be marked with 3rd party certification testing agencys logos or trademark, along with the maximum operating pressure

Mueller Industries XHP01035

Schedule 40 PVC plastic fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Renowned for superior strength and enhanced performance, our pressure plastic fittings are designed and tested under real world cyclic pressure conditions so they excel in extreme applications where lesser products often fail. Along with superior strength, our pressure plastic fittings offer smoother inner walls for low pressure drops and superior resistance to chemicals and corrosion.

APPLICATION For use in cold-water pressure applications including potable water supply, irrigation and pool/spa (SCHED 40)/ For use in non-pressurized drain, waste and vent sanitary systems (DWV)
• MATERIAL Virgin rigid polyvinyl chloride (PVC) compounds conform to cell class 12454 as defined in ASTM D1784.
• Acrylonitrile-butadiene-styrene (ABS) DWV fittings shall conform to cell class 3-2-2-2-2 as defined in ASTM 3965.,
  
  

  Streamline PVC 10531-18179