Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 1297 - 1308 of 1396 ▶ ▶|
View:

Heat Pump Condensing Unit 1.5 Ton 15 SEER 1 Stage230/1 R454B

Efficiency
  • 14.3 - 16.0 SEER2 / 10.0 - 12.5 EER2 / 7.5 - 7.8 HSPF2 (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Sound
  • Sound levels as low as 70 dBA Reliability
  • Non-ozone depleting and low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability Durability
    Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
  • Low ambient cooling (down to 0°F/-17.8°C) with approved low ambient accessory kits
    • Item#:
    R5H5S18AKAAA
    Manufacturer Item:
    R5H5S18AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5H5S_SPEC

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    R80MSN0901714A
    Manufacturer Item:
    R80MSN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    95% Multi-Position Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement
    • Item#:
    R95ESN1002120A
    Manufacturer Item:
    R95ESN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R95ESN1002120A_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    R80MSN0902120A
    Manufacturer Item:
    R80MSN0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    Air Conditioning Condensing Unit 2.5 Ton 13.4 SEER 1 Stage 230/1 R454B Pre-Charged, Installed Drier

  • Factory pre-charged with enough refrigerant for a 15-foot line set.
  • 13.4 SEER2 AC-only condenser
  • Single stage compressor
  • Filter drier included to be field-installed
  • R454B refrigerant
    • Item#:
    R5A4S30AKANA
    Manufacturer Item:
    R5A4S30AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5A4S_SPEC

    Air Conditioning Condensing Unit 5 Ton 13.4 SEER1 Stage 230/1 R454B Pre-Charged, Installed Drier

  • Factory pre-charged with enough refrigerant for a 15-foot line set.
  • 13.4 SEER2 AC-only condenser
  • Single stage compressor
  • Filter drier included to be field-installed
  • R454B refrigerant
    • Item#:
    R5A4S60AKANA
    Manufacturer Item:
    R5A4S60AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5A4S_SPEC

    92% Modulating Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement
    • Item#:
    R92MSN0601714A
    Manufacturer Item:
    R92MSN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92MSN-ICP_Spec

    Air Conditioning Condensing Unit Performance Series 1.5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm)
  • spacing or with 3/8 (10mm) spacing for extra protection
    LIMITED WARRANTY*
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
  • limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for
    • Item#:
    R4A418LKA
    Manufacturer Item:
    R4A418LKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit 4 Ton 13.4 SEER1 Stage 230/1 R454B Pre-Charged, Installed Drier

  • Factory pre-charged with enough refrigerant for a 15-foot line set.
  • 13.4 SEER2 AC-only condenser
  • Single stage compressor
  • Filter drier included to be field-installed
  • R454B refrigerant
    • Item#:
    R5A4S48AKANA
    Manufacturer Item:
    R5A4S48AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5A4S_SPEC

    Up to 97% Multi-Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)
    • Item#:
    R96MSN0802120A
    Manufacturer Item:
    R96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R96MSN-ICP_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
    • Item#:
    R80MSL0701412A
    Manufacturer Item:
    R80MSL0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    Heat Pump Condensing Unit 3.5 Ton 15 SEER 1 Stage230/1 R454B

    Efficiency
  • 14.3 - 16.0 SEER2 / 10.0 - 12.5 EER2 / 7.5 - 7.8 HSPF2 (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Sound
  • Sound levels as low as 70 dBA Reliability
  • Non-ozone depleting and low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability Durability
    Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
  • Low ambient cooling (down to 0°F/-17.8°C) with approved low ambient accessory kits
    • Item#:
    R5H5S42AKAAA
    Manufacturer Item:
    R5H5S42AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5H5S_SPEC
    |◀ ◀ 1297 - 1308 of 1396 ▶ ▶|
    View: