Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ 1273 - 1284 of 1396 ▶|
View:
  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Item#:
    R80MSN0451412A
    Manufacturer Item:
    R80MSN0451412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 14.3 - 16.0 SEER2 / 10.0 - 12.5 EER2 / 7.5 - 7.8 HSPF2 (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Sound
  • Sound levels as low as 70 dBA Reliability
  • Non-ozone depleting and low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability Durability
    Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
  • Low ambient cooling (down to 0°F/-17.8°C) with approved low ambient accessory kits
  • Item#:
    R5H5S30AKAAA
    Manufacturer Item:
    R5H5S30AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
  • Item#:
    R4A448GK
    Manufacturer Item:
    R4A448GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
  • Item#:
    R4A442GK
    Manufacturer Item:
    R4A442GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)
  • Item#:
    R96MSN0401712A
    Manufacturer Item:
    R96MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm)
  • spacing or with 3/8 (10mm) spacing for extra protection
    LIMITED WARRANTY*
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
  • limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for
  • Item#:
    R4A460GK
    Manufacturer Item:
    R4A460GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
  • Item#:
    R4A436GK
    Manufacturer Item:
    R4A436GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
    Comfort
  • System supports programmable or standard thermostat controls
    Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
  • Item#:
    R5A5S30AKAWA
    Manufacturer Item:
    R5A5S30AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Item#:
    R80MSU0802120A
    Manufacturer Item:
    R80MSU0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet

  • Item#:
    R92ESN0401410A
    Manufacturer Item:
    R92ESN0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)
  • Item#:
    R96MSN1202422A
    Manufacturer Item:
    R96MSN1202422A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
  • Item#:
    R4A424LKA
    Manufacturer Item:
    R4A424LKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 1273 - 1284 of 1396 ▶|
    View: