Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 1261 - 1272 of 1396 ▶ ▶|
View:

Package Roof Top Unit Gas 20 Ton 460/3 Medium Heat

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection
    • Item#:
    RGV240LEJA0AAA
    Manufacturer Item:
    RGV240LEJA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    80% Low NOX Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
    • Item#:
    R80MSL0451412A
    Manufacturer Item:
    R80MSL0451412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    ICP Heat Pump Condensing Unit Enhanced Fan Guard 1.5 Ton


    • Scroll compressors on all models
    • Suction line accumulator factory installed
    • Integrated solid state control with TimeTemperature Defrost
    • High and Low pressure switches
    • Copper tube / aluminum fin coil
    • Easy Access service valves on all models
    • External high and low refrigerant service ports
    • Only two screws to access control panel
    • Factory charged with R410A refrigerant
    • Painted cabinet finish over Gallonvanized steel
    • Coated inlet grille with 3/8 spacing standard (hail guard)
    • 5 year compressor limited warranty Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
    • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limited warranty (including compressor and coil) * For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications
    Item#:
    R4H418GKP
    Manufacturer Item:
    R4H418GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4H4-ICP-Wiring_Misc
    R4H4-ICP_Install
    R4H4-ICP_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
    • Item#:
    R80MSL0701716A
    Manufacturer Item:
    R80MSL0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    Air Conditioning Condensing Unit Performance Series 1.5 Ton 15 SEER 1 Stage Scroll Compressor Installed Drier

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
    Comfort
  • System supports programmable or standard thermostat controls
    Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    R5A5S18AKAWA
    Manufacturer Item:
    R5A5S18AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5A5S-Series_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    R80MSN0701412A
    Manufacturer Item:
    R80MSN0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    Air Conditioning Condensing Unit 3 Ton 13.4 SEER 1 Stage 230/1 R454B Pre-Charged, Installed Drier

  • Factory pre-charged with enough refrigerant for a 15-foot line set.
  • 13.4 SEER2 AC-only condenser
  • Single stage compressor
  • Filter drier included to be field-installed
  • R454B refrigerant
    • Item#:
    R5A4S36AKANA
    Manufacturer Item:
    R5A4S36AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5A4S_SPEC

    Up to 97% Multi-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)
    • Item#:
    R96MSN0601716A
    Manufacturer Item:
    R96MSN0601716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R96MSN-ICP_Spec

    Air Conditioning Condensing Unit 2 Ton 13.4 SEER1 Stage 230/1 R454B Pre-Charged, Installed Drier

  • Factory pre-charged with enough refrigerant for a 15-foot line set.
  • 13.4 SEER2 AC-only condenser
  • Single stage compressor
  • Filter drier included to be field-installed
  • R454B refrigerant
    • Item#:
    R5A4S24AKANA
    Manufacturer Item:
    R5A4S24AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R5A4S_SPEC

    80% 18 Speed Ultra-Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    R80MSU0601716A
    Manufacturer Item:
    R80MSU0601716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSU-ICP-Warranty_Misc
    R80MSU-ICP_Install
    R80MSU-ICP_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
    • Item#:
    R80MSL0902120A
    Manufacturer Item:
    R80MSL0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    Air Conditioning Condensing Unit Performance Series 2.5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A430GK
    Manufacturer Item:
    R4A430GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install
    |◀ ◀ 1261 - 1272 of 1396 ▶ ▶|
    View: