S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Nu-Calgon GelTabs 4185-15 Condensate Drain Pan Treatment Tablet, 1 Tab, Gel Tabs are formulated with a breakthrough gel locking technology for treating air conditioning drain pans and lines. Keeps the drain pan from clogging and eliminates foul and musty odors. Four sizes are available 3 Ton, 5 Ton, 15 Ton and 20 Ton tabs. For added convenience, the 3 Ton and 5 Ton Gel Tabs are also offered in a bulk pack. The 3 Ton bulk pack contains 200 tabs and the 5 Ton bulk pack contains 100 tabs. Multiple Gel Tabs can be added to the pan to acquire the necessary treatment for larger systems. Gel Tabs are easy to use. Put them into the drain pan and forget about them. When activated by condensation, the tablet will turn to gel and lock into place. This ensures that the tab will not move and potentially block the drain. Gel Tabs are designed to completely dissolve at an even rate over a 3 month period leaving nothing to remove when the product is done working.Sid Harvey Item #:4185-15: Replaces Part #:'s : B17-003,
Nu-Calgon 4185-15
Nu-Calgon 4185-15
Nu-Calgon 9272-23 Triple Parallel Head QC7I
9272-23
9272-23
Nu-Calgon 4779-0 The A/C Re-New Injector was designed to inject A/C Re-New into air conditioning and refrigeration systems. It has a capacity of 4 fl. oz. and can be used for other injectable products as well, including amounts less than the 4 fl. oz. capacity. It is constructed of rugged aluminum and has a maximum working pressure of 600 psi. It has a Schrader fitting at one end and a short length of hose with a ball valve on the other end.,
Nu-Calgon 4779-0
Nu-Calgon 4779-0
Nu-Calgon 4779-0
Nu-Calgon 9617-16 Water Filter Nu-Plus 4CB5
9617-16
9617-16
3112-40
Item#:
3112-40
Manufacturer Item:
3112-40
Manufacturer:
NU-CALGON
Item#:
4189-01
Manufacturer Item:
4189-01
Manufacturer:
NU-CALGON
Clean new or lightly corroded existing systems with Nu-Calgon System Cleaner (4370-08) prior to the installation of Burst-Kontr'l AP-100. Rinse thoroughly. Do not use Burst Kontr'l AP-100 with Galvanized steel. Refer to the dilution chart below to determine how much Burst-Kontr'l AP-100 to use as a percent of system volume to achieve target freeze protection or burst protection.
,
- Premixed and ready-to-use
- Provides burst protection to -100 deg F and freeze protection to -60 deg F
- Maximum corrosion protection for all metals including aluminum and copper
- Non-toxic and non-corrosive propylene glycol based fluid
- Formulated for optimum heat transfer and maximum fluid life
- Chemical composition includes propylene glycol
- Closed system anti-freeze agent
,
4187-15
4187-15
Nu-Calgon 4778-11 Spray Wand 39"
4778-11
Everpure Nu-Plus OCS2 Water Filter Cartridge, 1500 Gallon, 0.5 micron, 0.5 gpm
,
- (6) cartridges per case
- New and improved Micro-Pure II media with AgION antimicrobial protection inhibits any potential bacterial growth
- Provides clear, fresh, premium quality ingredient water for consistently great tasting coffee and beverages
- Everpures unique filter blend using activated carbon reduces chlorine taste and odor and other offensive contaminants
- Saves energy by reducing scale build-up, proportioned scale inhibitor feed dramatically prevents limescale from forming in brewing equipment
- Precoat submicron technology reduces dirt and particles as small as 1/2 micron in size
- Reduces health contaminants such as asbestos fibers and Cryptosporidium and Giardia cysts
- Sanitary cartridge replacement is simple, quick and clean, internal filter parts are never exposed to handling or contamination
- Delivers premium quality water for ice and coffee applications
- Designed for applications where the i20002 is too long
- Bacteriostatic
- Cyst reduction
- Scale control
,
9618-07
9618-07
Nu-Calgon 4168-05 Evap-Power Evaporator Cleaner 2.5 Gallon,
,
,
4168-05
4168-05
Thermo-Trap Gel's unique formula provides a protective barrier from open flames and heat that are present during soldering and brazing. The gel works as a shield that protects the surface from melting or burning. When finished, the remaining gel is easily wiped up and leaves no residue or stain. the gel is not a heat sink, but a protective barrier. Product may need to be added more than once if subjected to open flames for a longer duration. Drywall, wood joists, or other areas are not damaged from the open flames. Apply to drywall, wood joists, wiring or other surfaces before brazing or soldering to protect them from the open flame. Protect adjacent surface areas from over-heating or damage prior to welding, brazing or soldering. Use to cool down heated surfaces. Prevent fires in adjacent areas when welding, brazing or soldering.
,
- Forms a protective barrier to keep flames or heat from damaging areas beyond direct work surface
- Protects drywall, wiring, joists, and other surrounding areas that a flame could also come in contact with
- Adheres to all surfaces without staining
- Viscous formula will not run or melt
- Harmless to skin and clothing
- Will not stain work surfaces
- Cleans up easily
- Odorless and biodegradable
- Protect adjacent surface areas from over-heating or damage prior to welding, brazing or soldering
- Cool down heated surfaces
- Less than 95% solubility
,