Thermo Dynamics Boiler OTF-1600 Aluminum Oil Fired Pool Water Package 350K BTU Input, 273K BTU Output
durable, long lasting construction, built to National Board Specifications Comes in Outdoor (OTF) or Indoor (ITF) Versions. All-copper indirect heat exchanger design practically eliminates corrosion, scaling and condensation problems, aluminized flue collector and firebox assembly withstands atmospheric corrosion, flame retention forced draft oil burner provides efficient combustion; easy access for maintenance and adjustment; UL listed components, precast refractory combustion chamber is surrounded by insulating pellets to keep heat loss through the base to a minimum preassembled for ease of installation.

• Flue Pipe 8"
• Firing Rate 2.50
• Width 26-1/4"
• Length 34"
• Height 45"
• Weight 650 Pounds

  thermo dynamics boiler otf-1600

Thermo Dynamics Boiler OTF-1600 Aluminum Oil Fired Pool Water Package 350K BTU Input, 273K BTU Output
durable, long lasting construction, built to National Board Specifications Comes in Outdoor (OTF) or Indoor (ITF) Versions. All-copper indirect heat exchanger design practically eliminates corrosion, scaling and condensation problems, aluminized flue collector and firebox assembly withstands atmospheric corrosion, flame retention forced draft oil burner provides efficient combustion; easy access for maintenance and adjustment; UL listed components, precast refractory combustion chamber is surrounded by insulating pellets to keep heat loss through the base to a minimum preassembled for ease of installation.

• Flue Pipe 8"
• Firing Rate 2.50
• Width 26-1/4"
• Length 34"
• Height 45"
• Weight 650 Pounds

  thermo dynamics boiler otf-1600cn

Thermo Dynamics Boilers 817100 Fire Tube Baffle for LM75/100 and LM110/135

Thermo Dynamics Boiler Parts 337818 Burner Door Insulation

Thermo Dynamics Boiler Parts 229151 Coil Blank Plate

Thermo Dynamics Boiler Parts 481005 Coil Gasket New Style

Thermo Dynamics Boilers 817100 Fire Tube Baffle for LM75/100 and LM110/135

Thermo-Dynamics HG03N Natural Gas Fired Cast Iron Water Boiler 82% AFUE 61K BTU/hr

Thermo-Dynamics HG03N

Thermo-Dynamics HG04N Natural Gas Fired Cast Iron Water Boiler 82% AFUE 95K BTU/hr

Thermo-Dynamics HG04N

Thermo Dynamics Boilers LM 75/100 Steel Hydrolic 2-Pass Low Mass Oil Fired Package Boiler, 105-140 MBH Input, 90.3-118.3 MBH Heating, 84 - 85.2% AFUE

• A wet-base design, a horizontal tube and a 2-pass heat exchanger make this one of the best-designed, best-heating boilers on the market
• Swing out burner door
• The low water content provides heat or hot water delivery within minutes of start-up
• Forced draft burner performs with minimal chimney draft
• The compatibility with indirect storage tanks provides enough hot water to meet the comfort requirement of virtually any home
• 1-piece boiler construction ensures years of trouble-free service and there are no push nipples or"O" rings to leak
• There are no push nipples or o-rings to leak
• The compact design saves space, yet it's capable of 3 firing rates
• The low, 5-1/2 Gallon water content provides heat and hot water delivery within minutes of start up, the low mass concept reduces standby losses associated with boilers during off cycles and provides nearly instant heating with less fuel consumption
• 83 - 85% AFUE, the high efficiency obtained with the LM boiler are due to the design to the heat exchanger, a 2-pass, wet base, Scotch Marine design
• 0.75 - 1.1 multiple firing rates- 1-boiler can be fired at 3-different rates, offering versatility and keeping costs low, IBR listed at each firing rate, each unit is supplied with nozzles and labels for all 3-rates
• Standing 36" length x 19" width x 19-3/4" height, this compact boiler not only saves space but can easily be installed in areas not approved for other boilers, the LM series is approved for both closet and alcove installation on combustible flooring
• Each boiler is constructed and hydrostatically tested in accordance with ASME boiler code, the capacity and efficiency are rated in accordance with the standards of the institute of boiler and radiator manufacturers (IBR)
• Lifetime limited warranty
• Built-in air scoop purges air from the system providing a quiet, trouble free hot water heating system without the use of external devices
• Easy cleaning and maintenance accessibility to combustion areas and the open tubes make it easy for the service technician to thoroughly clean the boiler
• The LM-series can be cleaned from either end by simply removing (8) brass nuts and the burner and clean-out door is a hinged, swing-away door

Thermo Dynamics Boiler S110KD Oil Fired Boiler Steel Knock-Down 154K BTU Input, 130K BTU Output, 84% AFUE W/5Gallon Coil

• COMBUSTION CHAMBER - 1" thick pyrolite ceramic fiber material. Fast warm-up - glows to incandescence in 11-17 seconds. Large diameter allows brushing flue passages without punching through chamber.
• PUMP PRESSURE - The S-Series operates at 140 PSI pump pressure for better fuel atomization, thereby having the ability to tolerate fuel oil with heavy ends.
• IGNITION SYSTEM - The S-Series is standard with a state-of-the-art, solid state ignition system, making it more tolerant to low voltage or voltage fluctuations.
• INTEGRATED IGNITION.
• ELECTRONIC DELAY with Solenoid Valve "clean-cut" Fuel Pump.
• WATER CONTENT - Compared to other dry base boilers, the S-Series has exceptional water content. The first size has 16Gallons of water. High water volume and placement of the coil in the hottest part of the boiler allows for maximum coil performance.
• EFFICIENCIES UP TO 86% AFUE - The unique tube design of the S-Series boiler heat exchanger slows the flue gases, allowing for more effective heat transfer without the need for extreme baffling often seen in other vertical tube boilers.
• LIFETIME LIMITED WARRANTY- Unlike other pro-rated warranties that often cover a small percentage of the cost of a new boiler after the 15th or 20th year, Thermo-Dynamics boiler replacement are never more than 50% of the replacement list price list.
• ASME CONSTRUCTED AND IBR RATED- Each boiler is constructed and hydrostatically tested in accordance with ASME Boiler Code. The capacity and efficiency are rated in accordance with the standards of the Institute of Boiler and Radiator Manufacturers (IBR).
• STANDARD FEATURES- The following built-in features found in all Thermo-Dynamics boilers increase the longevity of the boiler and make the unit easier to service, ensuring maximum efficiency and performance for the life of the boiler:
• Built-in "Air Scoop" purges air from the system providing a quiet, trouble free hot water heating system without the use of external devices.
• Extended Flange Coil is away from the boiler for easy accessibility. The use of ribbed neck carriage bolts eliminates the problems encountered when a weld stud is broken during servicing. The large coil plate allows for a greater gasket sealing area.
• Extended weld fittings of SA106-Schedule 80 seamless pipe extend beyond the jacket and allow the service technician or homeowner to see small leaks that, if undetected, could later damage the boiler shell and void the warranty.
• Easy cleaning and maintenance accessibility to combustion areas and the open tubes make it easy for the service technician to thoroughly clean the boiler. No tight, pin-type passage ways with "hidden nooks and crannies", making a thorough cleaning impossible. A well-maintained boiler continues to perform at higher efficiency and is less likely to develop service problems.

  steel oil boilers

Thermo Dynamics Boilers CWL 85/100 Steel High Efficiency Oil-Fired Water Boiler, 83.2 - 84.3% without Damper and 84.9 - 86% with Damper AFUE, 119 - 140 MBH Input, 101 - 118 MBH Heating

• Safe, comfortable dependable home heating
• Tested for zero clearance installation
• 360 deg wet leg design
• Compact design allows greater latitude in placing the boiler where most convenient, a compact 29-1/2" in height
• CWL series is remarkably efficient with department of energy AFUE ratings of up to 86%
• Forced draft burner performs with minimal chimney draft
• Blended firing rates
• Oval tube heat exchanger provides greater heat transfer more heat is transferred to your home
• Extended coil flange means dependable operation and easy servicing
• Piping connections are at the front top of the unit for ease of installation
• CWL units are ASME constructed and stamped, National Board registration is available
• 15 Gallon water reservoir assures ample hot water
• Factory mounted/wired burner and controls
• Fully insulated heat exchanger with powder-coated cabinet
• Packaged with standard 5 gpm tankless coil (domestic hot water)
• Equipped with triple aquastat, circulator and temperature/altitude gauge
• Provided with additional nozzles to achieve a variety of heat inputs
• Provided with a lifetime limited warranty