S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
International Comfort Products Fast Heating Parts NAHA00101VC Internal Vent Kit for G9MXE4141 61714 81716 12116 122422 Furnace,
Item#:
NAHA00101VC
Manufacturer Item:
NAHA00101VC
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products Fast Parts NASA001CH Crankcase Heater For 42, 48, 60 Scroll Compressor, 230 volt
Item#:
NASA001CH
Manufacturer Item:
NASA001CH
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products Fast Heating Parts NAHC00101MH Mobile Home Single Stage Conversion Kit Condensing Gas Furnace
Item#:
NAHC00101MH
Manufacturer Item:
NAHC00101MH
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products Fast Parts NAHB00101CA Coil Adapter Kit for F9MES1002120, 1202420, 1402420 Gas Furnaces
Item#:
NAHB00101C
Manufacturer Item:
NAHB00101CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products Fast Heating Parts NAHA001CV Concentric Vent Kit 3"
Item#:
NAHA001CV
Manufacturer Item:
NAHA001CV
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB424060K001B
Manufacturer Item:
PGB424060K001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB430040K001B
Manufacturer Item:
PGB430040K001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB424040K001B
Manufacturer Item:
PGB424040K001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Mortex Products R68AE0010 Control Board
Item#:
R68AE0010
Manufacturer Item:
R68AE0010
Manufacturer:
MORTEX PRODUCTS, INC.
Item#:
TY0013
Manufacturer Item:
TY-0013
Manufacturer:
EVERKEM DIVERSIFIED PRODUCTS
Goodman Heating Parts 0130F00010 Flame Sensor
Item#:
0130F00010
Manufacturer Item:
0130F00010
Manufacturer:
GOODMAN DISTRIBUTION, INC.
Goodman Heating Parts Gasket Kit for P125" 7003F P125" 7004F Furnaces
Goodman Heating Parts 0154F00001P
Goodman Heating Parts 0154F00001P
Item#:
0154F00001P
Manufacturer Item:
0154F00001P
Manufacturer:
GOODMAN DISTRIBUTION, INC.