Brand Name
BTU
Voltage
Connections
Position
Length
Width
Height
Refrigerant
|◀ 1 - 12 of 136 ▶|
View:
Tempstar FXM4X3600AL Copper Tube Multi-Position Cased A Fan Coil with TXV Metering, 3 ton, 36000 BTU/hr
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X3600AL
Manufacturer Item:
FXM4X3600AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Tempstar FXM4X2400AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 2 ton, 24000 BTU/hr
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X2400AL
Manufacturer Item:
FXM4X2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Tempstar FXM4X3000AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 2.5 ton, 30000 BTU/hr
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X3000AL
Manufacturer Item:
FXM4X3000AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FH3617TPSJSN Steel Standard Efficiency 1-Stage Non-Communicating Air Handler, 36000 BTU/hr, 3 ton, 208 - 230 VAC
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications
  • Factory-installed indoor coil
  • Sturdy cabinet construction with 1" of foil faced insulation for excellent sound and insulating characteristics
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort, kits include circuit breakers which meet UL and CUL requirements for service disconnect
  • Enhanced airflow upto 0.7" external static pressure
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE Standard 193
  • Rugged wall steel cabinet construction, designed for added strength and versatility
  • Blower housing with controls, motor and blower, slide out design for service and maintenance convenience
  • Traditional open wire element design for heat applications
  • Field convertible for vertical downflow, horizontal left hand or right hand air supply
  • Indoor coil design provides low air side pressure drop, high performance and extremely compact size
  • 3-combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors
  • Expansion valve on indoor coil provides for operation with air conditioning
  • Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Coils are tested at the factory with an extensive refrigerant leak check
  • Coils have copper sweat refrigerant connections
  • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils
  • Provisions for field electrical, connections available from either side or top of the air handler cabinet
  • Connection point for high VAC age wiring is inside the air handler cabinet
Item#:
FH3617TPSJSN
Manufacturer Item:
FH3617TPSJSN
Manufacturer:
FUJITSU
Tempstar FEM4X3000BL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and TXV Metering, 2.5 ton, 30000 BTU/hr, 208/230 VAC
  • TXV metering device
  • Copper tube/aluminum fin coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • 5-speed ECM motor
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness
  • No heat (plug) kit factory installed
  • 5 years limited parts warranty
  • Sales code
  • Aluminum tube and fin evaporator coil
Item#:
FEM4X3000BL
Manufacturer Item:
FEM4X3000BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Tempstar FXM4X4800AL Copper Tube Multi-Position Cased A Fan Coil with TXV Metering, 4 ton, 48000 BTU/hr
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X4800AL
Manufacturer Item:
FXM4X4800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Tempstar FEM4X3600BL Aluminum Tube Multi-Position Slope Fan Coil with TXV Metering, 3 ton, 36000 BTU/hr
  • TXV metering device factory installed
  • High efficiency, 5-speed, electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • Low VAC age circuit protective fuse 3 amp in-line on wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FEM4X3600BL
Manufacturer Item:
FEM4X3600BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Tempstar FEM4X2400CL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and TXV Metering, 2 ton, 24000 BTU/hr, 208/230 VAC
  • TXV metering device
  • Copper tube/aluminum fin coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • 5-speed ECM motor
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness
  • No heat (plug) kit factory installed
  • 5 years limited parts warranty
  • Sales code
  • Aluminum tube and fin evaporator coil
Item#:
FEM4X2400CL
Manufacturer Item:
FEM4X2400CL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Tempstar FEM4P2400AL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and Piston Metering, 2 ton, 24000 BTU/hr, 208/230 VAC
  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness
  • 5 years limited parts warranty
Item#:
FEM4P2400AL
Manufacturer Item:
FEM4P2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FH4821TPSJSN Steel Standard Efficiency 1-Stage Non-Communicating Air Handler, 48000 BTU/hr, 4 ton, 208 - 230 VAC
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications
  • Factory-installed indoor coil
  • Sturdy cabinet construction with 1" of foil faced insulation for excellent sound and insulating characteristics
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort, kits include circuit breakers which meet UL and CUL requirements for service disconnect
  • Enhanced airflow upto 0.7" external static pressure
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE Standard 193
  • Rugged wall steel cabinet construction, designed for added strength and versatility
  • Blower housing with controls, motor and blower, slide out design for service and maintenance convenience
  • Traditional open wire element design for heat applications
  • Field convertible for vertical downflow, horizontal left hand or right hand air supply
  • Indoor coil design provides low air side pressure drop, high performance and extremely compact size
  • 3-combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors
  • Expansion valve on indoor coil provides for operation with air conditioning
  • Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Coils are tested at the factory with an extensive refrigerant leak check
  • Coils have copper sweat refrigerant connections
  • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils
  • Provisions for field electrical, connections available from either side or top of the air handler cabinet
  • Connection point for high VAC age wiring is inside the air handler cabinet
Item#:
FH4821TPSJSN
Manufacturer Item:
FH4821TPSJSN
Manufacturer:
FUJITSU
Fujitsu FH3017TPSJSN Steel Standard Efficiency 1-Stage Non-Communicating Air Handler, 30000 BTU/hr, 2.5 ton, 208 - 230 VAC
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications
  • Factory-installed indoor coil
  • Sturdy cabinet construction with 1" of foil faced insulation for excellent sound and insulating characteristics
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort, kits include circuit breakers which meet UL and CUL requirements for service disconnect
  • Enhanced airflow upto 0.7" external static pressure
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE Standard 193
  • Rugged wall steel cabinet construction, designed for added strength and versatility
  • Blower housing with controls, motor and blower, slide out design for service and maintenance convenience
  • Traditional open wire element design for heat applications
  • Field convertible for vertical downflow, horizontal left hand or right hand air supply
  • Indoor coil design provides low air side pressure drop, high performance and extremely compact size
  • 3-combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors
  • Expansion valve on indoor coil provides for operation with air conditioning
  • Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Coils are tested at the factory with an extensive refrigerant leak check
  • Coils have copper sweat refrigerant connections
  • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils
  • Provisions for field electrical, connections available from either side or top of the air handler cabinet
  • Connection point for high VAC age wiring is inside the air handler cabinet
Item#:
FH3017TPSJSN
Manufacturer Item:
FH3017TPSJSN
Manufacturer:
FUJITSU
Comfortmaker FVM4X3600BL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 3 ton, 36000 BTU/hr
  • TXV metering device factory installed
  • High efficiency, 2-stage variable speed electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • Adjustable cooling and heating on/off delay
  • Multiple electrical entry locations
  • Time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • Humidifier/humidistat terminals
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • TXV and manifold positioned to the side for easier cleaning
  • Zero clearance without heaters
  • 10 years limited evaporator coil warranty and 7 years limited parts warranty
Item#:
FVM4X3600BL
Manufacturer Item:
FVM4X3600BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
|◀ 1 - 12 of 136 ▶|
View: