Brand Name
Material
Type
Diameter
Length
Size
Application
Insulated
View:
DuraVent FasNSeal FSELB93 .16 Inch AL29-4C Stainless Steel Gas Vent Elbow, 3 Inch, 9 deg
  • Single wall construction
  • Use to go from horizontal to vertical runs or vertical to horizontal runs
Item#:
FSELB9003
Manufacturer Item:
FSELB9003
Manufacturer:
DURAVENT, INC.
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 9 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 Inch air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.
  • FasNSeal is for use with natural gas or propane categories II, III and IV appliances or type BH gas vent systems, having a max rated operating temperature of 48 deg F and a max positive pressure of 15 Inch water column
  • FasNSeal can be used on a wide range of applications, including high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters
Sid Harvey Item #:FSVL3603: Replaces Part #:'s : 20870
Item#:
FSVL3603
Manufacturer Item:
810003095
Manufacturer:
DURAVENT, INC.
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 9 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 Inch air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.
  • FasNSeal is for use with natural gas or propane categories II, III and IV appliances or type BH gas vent systems, having a max rated operating temperature of 48 deg F and a max positive pressure of 15 Inch water column
  • FasNSeal can be used on a wide range of applications, including high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters
Item#:
FSVL2403
Manufacturer Item:
FSVL2403
Manufacturer:
DURAVENT, INC.
Type B gas vent products are tested and listed to UL 441 for approved gas appliances and feature our innovative twist-lock connection and locking tab, eliminating the need for sheet metal screws. Metal-Fab type B gas vent combines hemmed flues and casings that maximize product durability and reliability and minimize installation time. Designed for versatility, Metal-Fab type B gas vent products 3 - 6 Inch adapt to major competing brands and when installed establish a UL Listed connection.
Item#:
4M5
Manufacturer Item:
4M5
Manufacturer:
VP SUPPLY CORP
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 9 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 Inch air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.
  • FasNSeal is for use with natural gas or propane categories II, III and IV appliances or type BH gas vent systems, having a max rated operating temperature of 48 deg F and a max positive pressure of 15 Inch water column
  • FasNSeal can be used on a wide range of applications, including high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters
Item#:
FSAVL3
Manufacturer Item:
FSAVL3
Manufacturer:
DURAVENT, INC.
Metal-Fab is committed to being an innovative leader in an industry that demands quality, excellence, and safety. Manufacturing superior venting products since 1959, we take pride in our continuous efforts to provide new and improved, highly efficient products to our customers. Introducing the new and improved Type-B High Performance Gas Vent Cap. The next generation of venting products has arrived. Metal-Fabs Type-B gas vent cap is UL441 listed and manufactured in the U.S.A. with superior venting technology to give your customers the confidence they have the best. The new low-profile design reduces the vent cap footprint and provides greater wind and water protection, eliminating rain leaks while minimizing the potential for downdrafts. Metal-Fab Type-B Gas Vent Caps are manufactured from the highest quality materials, helping to increase product function and efficiency, creating a product that lasts a lifetime.
  • 1 Inch minimum clearance to combustibles
  • SureLock locking system creates secure connections without tools
  • Made in USA
Item#:
5MCHP
Manufacturer Item:
5MCHP
Manufacturer:
VP SUPPLY CORP
Type B gas vent products are tested and listed to UL 441 for approved gas appliances and feature our innovative twist-lock connection and locking tab, eliminating the need for sheet metal screws. Metal-Fab type B gas vent combines hemmed flues and casings that maximize product durability and reliability and minimize installation time. Designed for versatility, Metal-Fab type B gas vent products 3 - 6 Inch adapt to major competing brands and when installed establish a UL Listed connection.
  • 1 Inch minimum clearance to combustibles
  • 1/4 Inch annular insulating air space
  • SureLock locking system creates secure connections without tools
  • Hemmed flue and casing eliminate sharp edges
  • 1 year limited warranty
Item#:
5M5
Manufacturer Item:
5M5
Manufacturer:
VP SUPPLY CORP
M & G Duravent FasNSeal FSBS3 0.016 Inch AL29-4C Stainless Steel Bird Screen, 3 Inch
  • Single wall construction
Item#:
FSBS3
Manufacturer Item:
810003120
Manufacturer:
DURAVENT, INC.
M & G Duravent FasNSeal FSTT3 0.016 Inch AL29-4C Stainless Steel Single Wall Termination Tee, 3 Inch, 6 Inch L
  • Use for standard and high-wind through-the-wall terminations
Item#:
FSTT3
Manufacturer Item:
FSTT3
Manufacturer:
DURAVENT, INC.
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 9 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 Inch air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.
  • FasNSeal is for use with natural gas or propane categories II, III and IV appliances or type BH gas vent systems, having a max rated operating temperature of 48 deg F and a max positive pressure of 15 Inch water column
  • FasNSeal can be used on a wide range of applications, including high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters
Item#:
FSVL3604
Manufacturer Item:
FSVL3604
Manufacturer:
DURAVENT, INC.
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 9 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 Inch air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.
  • FasNSeal is for use with natural gas or propane categories II, III and IV appliances or type BH gas vent systems, having a max rated operating temperature of 48 deg F and a max positive pressure of 15 Inch water column
  • FasNSeal can be used on a wide range of applications, including high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters
Item#:
FSVL1803
Manufacturer Item:
810003093
Manufacturer:
DURAVENT, INC.
Hart & Cooley 6RP12 0.012 Inch Aluminum Inner and 0.018 Inch G90 Galvanized Steel Outer Round Pipe, 6 Inch, 12 Inch L
  • 3 - 12 Inch pipe and fitting couplers overlap 1-3/8 Inch when joined together therefore, assembled length is 1-3/8 Inch less than listed length
  • Deep locking groove assures solid joint and secure lock
  • Corrosion resistant aluminum inner wall for rapid warm-up
  • Unique locking band provides 360 deg turning radius of the pipe and fittings
  • Locking band slides over tabs easily, locks firmly without twisting
  • Locking tabs hold pipe securely together, can be easily unlocked
  • Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
  • Reinforced ends curled bead on end of outer pipe for rigidity and strength
  • The allowable minimum clearance to combustibles is 1 Inch
  • A full set of installation instructions are supplied with caps and supports
Item#:
6RP12
Manufacturer Item:
016305
Manufacturer:
HART & COOLEY, INC.
View: