Brand Name
Cooling BTU
Voltage
Phase
Refrigerant
SEER

Fujitsu General America’s feature-rich line of residential air conditioner units range from 13 to 20 SEER in 1.5 to 5 ton sizes. Scroll compressor technology make these units efficient and durable. Optimized fan orifice contributes to optimal airflow and enhanced mufflers and improved refrigerant tubing create better overall performance. The composite base pan adds to quiet performance and helps eliminate corrosion. The 15” industry-leading corner service access and a roomy diagnostic service window means maintenance calls go quickly. Powder coat paint system provides a lasting professional finish.

|◀ ◀ 277 - 288 of 306 ▶ ▶|
View:

Air Conditioning Condensing Unit Performance Series 4 Ton 14 SEER 1 Stage Scroll Compressor R401A

REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A448GK
    Manufacturer Item:
    R4A448GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 3.5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A442GK
    Manufacturer Item:
    R4A442GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm)
  • spacing or with 3/8 (10mm) spacing for extra protection
    LIMITED WARRANTY*
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
  • limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for
    • Item#:
    R4A460GK
    Manufacturer Item:
    R4A460GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 3 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A436GK
    Manufacturer Item:
    R4A436GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 2 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A424LKA
    Manufacturer Item:
    R4A424LKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 1.5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
    BUILT TO LAST
  • Pre- painted cabinet finish over galvanized steel
  • Models available with coated inlet grille with 2 (51mm)
  • spacing or with 3/8 (10mm) spacing for extra protection
    LIMITED WARRANTY*
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
  • limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for
    • Item#:
    R4A418LKA
    Manufacturer Item:
    R4A418LKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 1.5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A418GK
    Manufacturer Item:
    R4A418GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit Performance Series 1.5 Ton 14 SEER 1 Stage Scroll Compressor R401A

    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Prepainted cabinet finish over galvanized steel
  • Coated inlet grille with 2 (51mm) spacing or with 3/8 (10mm) grille spacing for extra protection
    • Item#:
    R4A418BKA
    Manufacturer Item:
    R4A418BKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A3-ICP-Wiring_Misc
    R4A3-ICP_Install

    Air Conditioning Condensing Unit 17 SEER 3 Ton ECM Motor

  • Small Footprint - Minimum footprint for easier handling, transportation, and installation.
  • Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The factory installed filter-drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system. The small base dimension and reduced unit clearances make for easier retrofits.
  • Accessible Information - QR code on unit provides quick access to technical documents and warranty information.
  • Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galva- nized steel chassis components resist corrosion and rust creep. Titanium colored powdercoat paint further protects external panels.
  • Quality Coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system pro- viding reliable performance and small unit size.
  • Rugged Coil Protection - Coils are protected from mechan- ical damage by a proven stamped steel coil guard design.
  • Protected Compressor - Compressors are protected inter- nally by a high pressure relief valve and a temperature sen- sor, and externally by the system high pressure switch. The liquid line filter-drier is factory installed to protect the com- pressor against moisture and debris.
  • Reliable Operation - Ball bearing fan motors provide supe- rior performance in extreme temperatures.
  • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion.
  • Top Discharge - Warm air is blown up, away from the struc- ture and any landscaping and allows compact location on multi-unit applications.
  • Low Operating Sound Levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.
  • Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electri- cal controls, swing out control box for full corner access, and removable fan guard allow easy access for unit mainte- nance.
  • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program
    • Item#:
    TC7B3621S
    Manufacturer Item:
    TC7B3621S
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    TC7B3621S
    TC7B3621S_Spec

    Air Conditioning Condensing Unit 17 SEER 4 Ton ECM Motor

  • Small Footprint - Minimum footprint for easier handling, transportation, and installation.
  • Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The factory installed filter-drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system. The small base dimension and reduced unit clearances make for easier retrofits.
  • Accessible Information - QR code on unit provides quick access to technical documents and warranty information.
  • Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galva- nized steel chassis components resist corrosion and rust creep. Titanium colored powdercoat paint further protects external panels.
  • Quality Coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system pro- viding reliable performance and small unit size.
  • Rugged Coil Protection - Coils are protected from mechan- ical damage by a proven stamped steel coil guard design.
  • Protected Compressor - Compressors are protected inter- nally by a high pressure relief valve and a temperature sen- sor, and externally by the system high pressure switch. The liquid line filter-drier is factory installed to protect the com- pressor against moisture and debris.
  • Reliable Operation - Ball bearing fan motors provide supe- rior performance in extreme temperatures.
  • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion.
  • Top Discharge - Warm air is blown up, away from the struc- ture and any landscaping and allows compact location on multi-unit applications.
  • Low Operating Sound Levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.
  • Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electri- cal controls, swing out control box for full corner access, and removable fan guard allow easy access for unit mainte- nance.
  • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program
    • Item#:
    TC7B4821S
    Manufacturer Item:
    TC7B4821S
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    TC7B4821S
    TC7B4821S_Spec

    Air Conditioning Condensing Unit 17 SEER 2 Ton ECM Motor

  • Small Footprint - Minimum footprint for easier handling, transportation, and installation.
  • Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The factory installed filter-drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system. The small base dimension and reduced unit clearances make for easier retrofits.
  • Accessible Information - QR code on unit provides quick access to technical documents and warranty information.
  • Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galva- nized steel chassis components resist corrosion and rust creep. Titanium colored powdercoat paint further protects external panels.
  • Quality Coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system pro- viding reliable performance and small unit size.
  • Rugged Coil Protection - Coils are protected from mechan- ical damage by a proven stamped steel coil guard design.
  • Protected Compressor - Compressors are protected inter- nally by a high pressure relief valve and a temperature sen- sor, and externally by the system high pressure switch. The liquid line filter-drier is factory installed to protect the com- pressor against moisture and debris.
  • Reliable Operation - Ball bearing fan motors provide supe- rior performance in extreme temperatures.
  • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion.
  • Top Discharge - Warm air is blown up, away from the struc- ture and any landscaping and allows compact location on multi-unit applications.
  • Low Operating Sound Levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.
  • Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electri- cal controls, swing out control box for full corner access, and removable fan guard allow easy access for unit mainte- nance.
  • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program
    • Item#:
    TC7B2421S
    Manufacturer Item:
    TC7B2421S
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    TC7B2421S
    TC7B2421S_Spec

    Air Conditioning Condensing Unit High Efficiency 4 Ton 17 SEER

    REFRIGERATION CIRCUIT
  • Copeland Scroll® Ultratech compressors on all models
  • Filterdrier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • High and low pressure switches
  • Copper tube / aluminum fin coil
    PERFORMANCE
  • Selfconfiguring installation capabilities with Observer Communicating Wall Control
  • Outdoor temperature sensor factory installed
  • Ball Bearing PSC fan motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
    EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
    BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
    WARRANTY*
  • 10 year No Hassle Replacement limited warranty
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts
    • Item#:
    TCA748GK
    Manufacturer Item:
    TCA748GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TCA7-ICP-Warranty_Misc
    |◀ ◀ 277 - 288 of 306 ▶ ▶|
    View: